Yes, this packaging can be used repeatedly if hygiene principles are observed. However, before each new filling it is necessary to thoroughly clean and disinfect the bottle and the dropper to minimize the risk of microbial contamination or residues of the previous formulation. For disinfection we recommend using a suitable alcoholic preparation, for example IPA 99 % isopropyl alcohol or ethanol 96 % denatured vegetable. After treatment, allow all parts to dry thoroughly at room temperature.

The bottle with dropper is ideal wherever you need to dose the product drop by drop. In practice it is used mainly for facial and eye serums, oil elixirs, concentrated active substances, aromatherapeutic blends and various tinctures intended for external use. Thanks to precise dosing, it is also suitable for test and laboratory samples where repeatable application of a small amount of preparation is important.

Before repeated use we recommend first mechanically rinsing the bottle with a suitable cleaning solution or with warm water and a mild cleaning agent that is compatible with both the previous and the new formulation. Then rinse the packaging thoroughly with clean water and allow it to dry. As a final step, apply disinfection using alcohol, for example IPA 99 % isopropyl alcohol or ethanol 96 % denatured vegetable. Allow the disinfectant to evaporate and make sure that the inside of the bottle and the dropper are completely dry before refilling.

If you decide not to reuse the packaging any longer, we recommend recycling it in accordance with local waste sorting rules. The glass part of the bottle is normally placed in the glass container according to the colour coding in your region. The dropper is composed of several materials (plastic, rubber, glass of the pipette), so it is advisable to separate the individual parts where possible and follow the recommendations of your municipality or collection company. Detailed information on the material composition of the packaging can be found in the parameter table next to the product and in the Packaging Quality Certificate, which will help you choose the most suitable recycling method.

For easier selection of packaging we recommend using the advanced filter, which you will find at the top of the page after clicking on the selected packaging category. It allows you to quickly narrow down the offer according to parameters such as neck type, size/volume, colour and packaging material. By combining several filters you will find a suitable bottle, pharma bottle, jar or pot that will best correspond to your specific product and the desired dosing method.