The spray pump is designed primarily for low‑viscosity liquids such as aqueous solutions, toners, light serums and mild cleansing solutions. More viscous emulsions, oil blends with higher viscosity or gels may not be dispensed evenly by the spray pump, or may gradually clog it. Therefore, before final use, we recommend performing a functionality test with the specific formulation in order to verify smooth spraying and proper dispersion of the product.

The packaging can be reused if proper hygiene principles are followed. Before each refilling, the bottle and the spray pump must be thoroughly cleaned and disinfected to minimize the risk of microbial contamination and undesirable reactions between residues of the original product and the new formulation. We recommend carrying out disinfection using isopropyl alcohol or ethanol, for example with the products IPA 99% isopropyl alcohol or Ethanol 96% denatured, plant‑based. After treatment, it is advisable to let all parts dry thoroughly and only then refill.

For routine maintenance, it is suitable to regularly flush the dip tube and the spray mechanism with warm water, optionally with a mild, non‑foaming cleaning agent, and then rinse thoroughly with clean water. When switching products, we recommend using disinfectant alcohol after mechanical cleaning and letting all parts dry completely. It is important that no residues of the previous product remain inside, as these could clog the spray pump or affect the fragrance and stability of the new preparation.

If you decide not to use the packaging any further, we recommend first emptying it completely and removing all product residues. The aluminum part can then be placed, in line with the instructions given with the product, in the appropriate recycling stream for metal packaging, or according to local waste‑sorting rules. The plastic spray pump should be separated from the metal part and sorted separately according to the type of plastic specified in the product parameters. Following the recommended recycling method helps reduce environmental burden and enables more efficient processing of used packaging.

The aluminum packaging with spray pump is also suitable for professional use, for example in beauty salons, hairdressing salons or wellness facilities, where representative product presentation and practical dosing are important. In professional use, the bottle is often used more intensively, so we recommend regular checks of the spray pump functionality, careful maintenance of packaging cleanliness and thorough disinfection between refills to maintain hygienic safety and consistent dosing.

To make it easier to find suitable packaging, you can use the advanced filter located at the top of the page after clicking on the relevant packaging category. In the advanced filter, several criteria can be combined at once, for example neck type and size, desired volume, color or container material. This allows you to quickly narrow down the offer to those packs that match the technical requirements of your product and the intended dispensing method.