Yes, the aluminium bottle with golden dispenser can be reused if hygiene principles are observed. Before each new filling we recommend thoroughly cleaning and disinfecting the packaging, ideally using a suitable alcohol such as isopropyl alcohol or ethanol. For this purpose you can use for example the products IPA 99 % isopropyl alcohol or Ethanol 96 % denatured plant-based. Only after the packaging and the dispenser are completely dry is the bottle ready to be refilled.

It is advisable to rinse the dispenser with warm (not boiling) water and a mild cleansing agent and then press it several times so that the solution passes through the entire dosing mechanism. Then rinse it with clean water and allow it to dry thoroughly in a vertical position. For the final disinfection, a small amount of alcohol can be pumped through briefly and then the components should be left to evaporate completely and dry. This reduces the risk of clogging and at the same time maintains smooth dosing.

The metal construction of the bottle is strong and resistant to normal mechanical load, so it is also suitable for travelling or carrying in a handbag. Before transport we recommend checking that the dispenser is properly tightened and, if necessary, placing the bottle for safety in a protective case or a resealable bag, especially for thin and highly liquid formulations. A correctly tightened component minimises the risk of unintentional product leakage during transport.

If you decide not to use the packaging further, we recommend recycling it in accordance with local waste sorting rules and the information given in the parameter table for the product on the Handymade.sk website. The metal parts of the bottle can in most cases be classified as metal packaging intended for recycling, and before handing over it is advisable to empty the packaging and remove any product residues. The plastic components of the dispenser are sorted according to the type of material, which is specified in the product parameters, and we do not recommend combining different materials in one collection container, unless the sorting system specifies otherwise.

To select suitable packaging we recommend using the advanced filter, which you will find at the top of the page after clicking on the relevant packaging category. Using the filter you can clearly narrow down the offer according to the type of neck, size, colour and packaging material. By combining these parameters you will quickly find bottles, vials, jars or containers that best match the physical properties of your product and the desired packaging design.