The bottle can be used repeatedly provided that basic hygiene principles are observed and it is suitable for the specific type of product you plan to fill. Before each new filling, we recommend thoroughly cleaning and disinfecting the packaging, ideally using suitable disinfectants such as isopropyl alcohol IPA 99 % or plant-based ethanol. For disinfection you can use the products IPA 99 % isopropyl alcohol or Ethanol 96 % denatured plant-based. With repeated use, always check the functionality of the pump and the condition of the material.

Before further filling, it is advisable first to rinse the packaging mechanically to remove residues of the previous product and then disinfect it. For disinfection we recommend using alcohol solutions that are compatible with the packaging material, for example IPA 99 % isopropyl alcohol or ethanol 96 % denatured plant-based. After treatment with alcohol, allow the bottle and the dispenser to dry thoroughly at room temperature. Do not use aggressive cleaning agents or very hot water in order to avoid damaging the plastic or the seals in the dispenser.

The plastic packaging is not intended to be washed in a dishwasher or boiled. Exposure to high temperatures may lead to a risk of deformation of the packaging, weakening of the walls or damage to the dispensing mechanism. Cleaning with lukewarm water and a mild cleaning agent is recommended, with subsequent disinfection with an alcohol solution at room temperature if required. When handling, avoid direct contact with hot heat sources and prolonged exposure to high temperatures so that the bottle retains its properties and functionality.

If you decide not to use the bottle further, we recommend first completely emptying it and removing any product residues. Then dispose of the packaging according to the recycling marking of the material stated in the product parameters on the website. Plastic parts usually belong in the container intended for sorted plastic waste, unless local regulations stipulate otherwise. In the case of combined materials (for example bottle and dispenser made from different types of plastic), it is advisable, if possible, to separate the individual components and sort them according to type. Following local waste sorting rules helps to ensure proper recycling and minimize environmental burden.

When choosing a suitable bottle or other packaging, we recommend using the advanced filter, which you can find at the top of the page after clicking on a specific packaging category. Thanks to the filter you can narrow down the selection according to several parameters – for example according to the type of neck, required size, colour of the packaging or according to the material. In this way you can easily find packaging that matches your formulation and method of dosing. For specific projects it is also worth checking the available accessories (closures, pumps, sprayers) so that the resulting combination is functional and also visually harmonized.