Yes, the packaging can, with appropriate use, be used repeatedly, but we recommend following strict hygiene rules. Before each new filling, the bottle and the sprayer must be thoroughly cleaned and then disinfected with a suitable product, for example isopropyl alcohol or ethanol. For disinfection you can use the products IPA 99 % isopropyl alcohol and Ethanol 96 % denatured plant-based. This reduces the risk of microbial contamination and preserves the good condition of the packaging and its functionality.

Before cleaning, we recommend completely emptying the packaging and disassembling the sprayer (if the design allows it). You can rinse the bottle with lukewarm water and a suitable cleaning agent, rinse thoroughly and let it dry. Afterwards, it is necessary to disinfect the packaging and the internal parts of the sprayer – a practical method is to fill a small amount of disinfectant solution (e.g. IPA or ethanol), which you spray several times through the mechanism. After disinfection, allow all parts to dry completely at room temperature. Such a procedure supports hygiene and the long-term functionality of the sprayer.

This type of plastic packaging is not intended for filling with hot solutions or for long-term exposure to high temperatures. In contact with higher temperature there is a risk of softening or deformation of the plastic, which may negatively affect sealing and the functionality of the sprayer. The packaging is not suitable for washing in a dishwasher or for boiling. We recommend using it at normal room temperatures and choosing gentle procedures without thermal stress for cleaning.

If you decide not to use the packaging any longer, we recommend first completely emptying it and removing any remaining contents. Then it is advisable to separate the plastic container and the sprayer so that you can place them in the correct sorted waste stream according to the material type indicated in the parameter table at the product. Always follow the local waste-sorting rules in your municipality or city. By not disposing of the packaging in mixed waste but recycling it in accordance with the recommendations, you help conserve resources and reduce the amount of plastic waste.

For quickly finding suitable packaging, there is an advanced filter, which you will find at the top of the page after clicking on a specific packaging category. In the advanced filter you can conveniently filter by neck type, required size, colour and packaging material. Thanks to the combination of these parameters, you can easily choose the bottle, jar or dispenser that best matches your product and intended use.

The trigger sprayer is most suitable for products with low to medium viscosity that need to be evenly sprayed over a larger area – for example cleaning solutions, auxiliary sprays, liquid preparations for surfaces or products applied from a greater distance. Before final use, we always recommend checking whether the specific formulation sprays well and whether the dosing corresponds to the desired method of application.