+421 950 333 113info@handymade.storeActive Days: −10 % with code ACTIVE10Shop now

SOLVENTS

IPA 99%, Isopropyl Alcohol, 5 l

Pack size100 ml500 ml1 l5 l20 l

IPA 99% (isopropyl alcohol, isopropanol) is an alcohol used to disinfect work surfaces and tools before making cosmetics. You can dilute the 99% concentration with water yourself to make a 70% disinfecting solution. full description

AvailabilityIn stock · 39 packs
Product codeALK001_5000
Batch75558259
Best before08/2027
€25.99incl. VAT€5.20/l

Lowest price in the last 30 days: €25.99

Product description

IPA 99% (isopropyl alcohol, isopropanol) is an alcohol used to disinfect work surfaces and tools before making cosmetics. You can dilute the 99% concentration with water yourself to make a 70% disinfecting solution. In formulations it serves as a solvent, and a spray of pure IPA breaks up foam on the surface of a surfactant blend.


What it is used for

  • Disinfection before production – a 70% solution for work surfaces and tools.
  • Solvent in formulations – with a cleaning and antimicrobial effect.
  • Defoamer – a spray breaks up bubbles on the surface when making shower jellies or soaps.
  • Alcohol-based hand products – rinse-off and leave-on products with a higher alcohol content.

Disinfecting surfaces and tools

For disinfection, use a 70% solution, made by diluting IPA 99% with water. Surfaces and tools must first be washed and dry. Then spray them and leave to dry, or wipe with a paper towel.

Low-percentage alcohol is not sufficient for effective disinfection. Spirits with an alcohol content of around 40% are not a substitute.

Also spray the paper towel with the 70% solution before wiping.


Use in formulations

Isopropyl alcohol is fully miscible with water and is added directly to water-based blends. It is incorporated afterwards, in the cooling phase below 40 °C. At higher temperatures it evaporates quickly and flammable vapours form.

The usage rate is 1–70%, in both rinse-off and leave-on products. A ready-made 70% IPA may also contain other ingredients. For precise formulations, 99% is the safer choice.

An antimicrobial effect does not mean preservation. IPA acts on viruses even at lower concentrations. However, this does not guarantee reliable preservation of the product.

It differs from ethanol in availability and in its effect on the skin. For small producers it replaces ethanol, which is hard for them to obtain. With frequent use, however, it dries the skin and increases water loss from it more than ethanol does. In commercial hand products the main active ingredient is usually ethanol at a concentration of 62–80%, and IPA is often only a supplement.

Hand products with a higher alcohol content need emollients, for example glycerine, which reduce irritation. A surfactant helps to dissolve essential oils in them. IPA is not a natural raw material.


Removing foam during production

When mixing the water phase or a surfactant blend, foam may form on the surface. Before thickening, a fine spray of pure IPA breaks it up. Simply spray the surface and wait a moment.

A higher concentration works better than a 70% solution because it evaporates completely, especially during heating. No alcohol remains in the finished product and it is not listed in the ingredients (INCI).


Safety at work

Isopropyl alcohol is flammable and irritant (GHS02, GHS07). The flash point is only 12 °C, the boiling point is 82 °C and the liquid evaporates quickly. The vapours are heavier than air, spread along the ground and can form an explosive mixture with air.

Work in a well-ventilated room, away from open flames and sparks, and also protect against static electricity. Use protective equipment, protect your eyes and skin, and do not inhale vapours or spray.

Do not combine or store it with strong oxidising agents, strong acids, alkalis, amines, alkanolamines and aldehydes. It may form peroxides.

Also pay attention to the packaging material. Aluminium, polystyrene, natural rubber, butyl rubber, EPDM and cast iron are not suitable. Stainless steel is suitable.


Frequently asked questions

Is isopropyl alcohol IPA 99% soluble in water?
Yes, isopropyl alcohol IPA 99% is fully soluble in water. It is added directly to water-based blends. It is incorporated afterwards, in the cooling phase below 40 °C, so that it does not evaporate and flammable vapours do not form. It can also be diluted with water to a 70% solution, which is used to disinfect surfaces and tools.
What IPA concentration should I use to disinfect tools when making cosmetics?
To disinfect surfaces and tools, use a 70% solution of isopropyl alcohol, prepared by diluting IPA 99% with water. It is applied to washed and dry surfaces. Sprayed surfaces are left to dry or wiped with a paper towel, which is best sprayed as well. Low-percentage alcohol, for example spirits of around 40%, is not sufficient for effective disinfection.
What is the difference between IPA and ethanol?
Isopropyl alcohol is more readily available to small producers than pure ethanol, but it dries the skin more. With frequent use it increases water loss from the skin more than ethanol does. In commercial hand products the main active ingredient is usually ethanol at a concentration of 62–80%, and IPA is often only a supplement. IPA is not a natural raw material.
Can IPA 99% be used as a preservative?
IPA 99% also has a preservative function in a formulation, but its antimicrobial effect alone does not mean reliable preservation of the product. It acts on viruses even at lower concentrations, which says nothing yet about the microbiological stability of the whole formulation. In addition, isopropyl alcohol serves as a solvent and a defoamer.
How do I remove foam from a surfactant blend using IPA?
Foam on the surface is broken up by a fine spray of pure isopropyl alcohol. It is used before thickening the blend, for example when making shower jellies or soaps. A higher concentration works better than a 70% solution. The alcohol evaporates, especially during heating, does not remain in the finished product and is not listed in the ingredients.
How much IPA 99% should be added to cosmetics?
The usage rate of isopropyl alcohol IPA 99% in cosmetics is 1–70%, in both rinse-off and leave-on products. Emollients, for example glycerine, are added to hand products with a higher alcohol content to reduce irritation. For precise formulations, 99% alcohol is the safer choice compared with a ready-made 70% solution, which may also contain other ingredients.

Parameters

INCI
Isopropyl AlcoholIsopropylalcohol
CAS No.
67-63-0
EC number
200-661-7
Product colour
ColourlessClear
Country of origin
European Union
Appearance
Liquid
Original best before date
30. 4. 2027
Recommended processing temperature
< 40 °C
Function in formulation
PreservativeDefoamerSolvent
Recommended usage rate
1 – 70 %
Solubility
Water-soluble
Application type
Leave-onRinse-off
Biodegradability
Readily biodegradable
Natural Index (NI ISO 16128)
0,00
Natural Origin Index (NOI ISO 16128)
0,00
Renewable Carbon Content (RCC)
0 %
Volume
5000 ml

Product documentation

CoACertificate of Analysis
batch 75558259PDF ↓
batch 75554055PDF ↓
TDSTechnical Data Sheet
Physical parameters and processingPDF ↓
SDSSafety Data Sheet
Available for purchased products —
Download all (ZIP)

3 PDF files in one archive

Learn how to work with it

From our blog
Ľubica G.12 Oct 2026SK

Verified purchase

Variant: IPA 99%, isopropyl alkohol, 500 ml

I use it for disinfection.

Translated automatically

Lukáš20 Aug 2026SK

Verified purchase

All-purpose cleaner — For cleaning and disinfecting all sorts of materials, surfaces and also machine parts. I also use it in winter as windscreen washer fluid.

Translated automatically

niamh B.15 Nov 2026EN

Verified purchase

Lucia G.8 Nov 2026SK

Verified purchase

Jan B.7 Nov 2026SK

Verified purchase

(11 reviews)