Follow the discounted products!
Nakúp ešte za 23,50€a dopravu máš zadarmo
Would you like to create account?
The plastic bottle with matte closure is a lightweight, durable and practical packaging suitable for professional as well as home filling of liquid and semi-liq... read more
0,65 € incl. VAT
The plastic bottle with matte closure is a lightweight, durable and practical packaging suitable for professional as well as home filling of liquid and semi-liquid preparations. Thanks to its reliable sealing, the contents are protected against leakage and common contamination during storage and transport. The smooth surface of the bottle is easy to clean and allows convenient labelling and branding for cosmetic brands, manufacturers of drugstore products and smaller artisan producers.
The individual bottle is compatible with several types of closures and dosing systems. Depending on the selected parameters, it can be combined with various solutions such as screw caps, droppers, spray pumps or practical applicators designed for more precise dosing of liquids.
The packaging–closure combinations created directly on Handymade are tested and functional. However, for all combinations we always recommend carrying out your own compatibility test (sealing, dosing and behaviour of the packaging in contact with the specific formulation), so that you can verify the suitability of the solution for your specific product.
All technical parameters of the packaging are listed in the enclosed Packaging Quality Certificate and in the product parameters.
The packaging can be used repeatedly, provided that you strictly follow hygiene principles and always carry out thorough cleaning between individual fillings. Before each new filling we recommend rinsing the bottle, mechanically removing residues of the previous contents and then disinfecting it with a suitable alcohol, for example IPA 99% isopropyl alcohol or ethanol 96% denatured, plant-based. Only after thorough drying is the bottle ready for safe reuse.
If you decide not to continue using the packaging, we recommend first emptying it of product residues and rinsing it if possible. Then sort the bottle and closure according to the material indicated in the parameter table at the product page on Handymade – usually this means placing them in the appropriate container for separated waste according to the type of plastic. In the case of a combination of several materials, it is advisable to separate them before disposal (for example separating the bottle and the cap) to facilitate recycling within the collection system.
The plastic packaging is not intended for disinfection at very high temperatures, for example by boiling or pouring boiling water over it. Contact with excessive heat may cause deformation of the walls or the closure, which negatively affects the sealing and the overall appearance of the packaging. For disinfection we therefore recommend using a suitable alcohol-based preparation applied by rinsing or spraying the inner and outer surfaces, and after application the bottle must be allowed to dry completely.
The bottle is intended primarily for liquid and semi-liquid preparations. For more viscous gels or emulsions we recommend choosing a combination with an appropriate type of closure or dosing system that will make it easier to squeeze out or pour the product. Before final implementation in serial production it is advisable to carry out a trial filling and test the dosing, so that you can be sure that the viscosity of your product is fully compatible with this type of packaging.
The simplest way to choose is to use the advanced filter in the packaging categories on Handymade. You can find the advanced filter at the top of the page after clicking on a specific category, where you can clearly set the required packaging parameters. You can select according to neck type, size, colour and material, which allows you to quickly find bottles, vials, jars or other containers that will best match your formulation and the desired product design.
