MICA POWDERS
MICA Pigment Powder, Toffelicious, 200 g
Pack size10 g50 g200 g500 g1 kg
Mica pigment powder, Toffelicious This brown pearlescent pigment made from mica and red iron oxide gives decorative cosmetics a satin brown in a caramel tone. full description
Lowest price in the last 30 days: €29.99
Product description
Mica pigment powder, Toffelicious
This brown pearlescent pigment made from mica and red iron oxide gives decorative cosmetics a satin brown in a caramel tone. It suits any product where you need a warm brown with a soft sheen and without pronounced sparkle: eyeshadows, bronzers, lipsticks, balms and coloured body oils. This mineral-origin pigment from European production is incorporated into the oil phase or added afterwards to the finished base, and it is intended for both rinse-off and leave-on products.
The pearlescent reflection is created on mica particles with an iron oxide surface treatment. The result is a rich brown with a subdued satin sheen that behaves like a pigment: it does not dissolve, it disperses.
Key properties
- Satin brown shade – mica (58–64%) with red iron oxide (38–52%) gives a warm brown with a soft pearlescent sheen and without coarse glitter.
- Fine particles – the average particle size is 5–25 µm, and the powder is odourless and free of nanomaterials.
- Insoluble, dispersible – the pigment dissolves neither in water nor in oil. It is incorporated into the product as evenly dispersed pigment particles.
- Heat-stable – it withstands temperatures of up to 800 °C, so it can be added to a hot oil phase or melted wax without loss of colour.
- Usage rate 1–30% – the range covers both subtle tinting and rich pressed powders and eyeshadows.
- For rinse-off and leave-on products – intended for the face, body, hands, feet, hair, scalp and nails.
Use in a formulation
The pigment is added to the oil phase or afterwards to the finished base. It gives the best results when you first mix the powder into a small amount of oil or melted butter to form a smooth paste and only then incorporate it into the rest of the recipe. Sprinkling the dry powder directly into a finished emulsion leaves lumps and uneven colour.
In anhydrous products (lipsticks, balms, solid bronzers, pressed eyeshadows) it is enough to mix the pigment thoroughly into the melted oil phase. The oil absorption is 50–65 g per 100 g of pigment. At higher usage rates, therefore, expect part of the oil to be “lost” into the powder and the product to be firmer.
In water-based and emulsion systems the pigment can be dispersed, but it cannot stay in suspension on its own. In thin products without a thickener or sufficient viscosity, the particles gradually sediment.
Before first use in a larger batch, pour off a small test portion and judge the colour only after it has cooled completely and set. The shade of pearlescent pigments looks different in a solid product than in the liquid mixture.
Suitable for products such as
- Eyeshadows and bronzers – loose and pressed, where the satin brown serves as a base or shading shade.
- Lipsticks and lip balms – the powder disperses in a melted oil and wax base.
- Nail cosmetics – the pigment is also intended for use on nails.
- Coloured body and hair products – oils, gels and masks with a soft pearlescent effect.
Good to know
The pigment meets the requirements for cosmetic colorants under Annex IV of Regulation (EC) No 1223/2009, including the heavy metal limits. It is not classified as hazardous under the CLP Regulation, so a safety data sheet is not required for it.
Keep to the recommended pH range of 6.0–9.0. In more acidic products, for example in peels with fruit acids, check the colour stability on a small sample beforehand.
Frequently asked questions
Parameters
- INCI
- Mica, Iron Oxide Red
- CAS No.
- 12001-26-2, 1309-37-1
- EC number
- 310-127-6, 215-168-2
- CI number
- 77019, 77491
- Product colour
- Brown
- Country of origin
- Spain
- Grade
- Cosmetic grade
- Odour
- Odourless
- Processing method
- DryingMillingSurface treatment
- Appearance
- Powder
- Formulation phase
- Oil phasePost-addition
- Free from
- parabensethylene oxide (EO)formaldehyde and formaldehyde donorssulfatesPEGEDTAphthalatesallergenic fragrance substancessiliconesalcohol
- Function in formulation
- Colorant
- Recommended processing temperature
- Bez obmedzenia °C
- Recommended usage rate
- 1 - 30 %
- Recommended formulation pH range
- 6,00 – 9,00
- Biodegradability
- Not applicable
- Suitable for
- All skin typesAll hair types
- Natural Index (NI ISO 16128)
- 0,00
- Natural Origin Index (NOI ISO 16128)
- 1,00
- Organic content
- 0 %
- Renewable Carbon Content (RCC)
- 0 %
Product documentation
- TDSTechnical Data Sheet
- PDF ↓
- SDSSafety Data Sheet
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.





