Spend over €100 for discounted shipping!

+421 950 333 113[email protected]

PLASTIC BOTTLES

Plastic bottle, white, white mini trigger sprayer, 200 ml

A ready-made bottle and closure set for sprays: a white plastic bottle with a nominal volume of 200 ml and a white trigger sprayer with the same type of neck. The PET bottle is lightweight and unbreakable. full description

AvailabilityIn stock · 546 packs
Product codeO24PB200-OVR24PB_M
€1.09incl. VAT

Lowest price in the last 30 days: €1.09

Save €0.05 with this set

Volume pricing
1–224 pcs€1.09Your price
225–1124 pcs€1.05−4 % · 1× plato
1125–5174 pcs€0.97−11 % · 5× plato
from 5175 pcs€0.86−22 % · 23× plato

Total for 1 pcs: €1.09

Product description

A ready-made bottle and closure set for sprays: a white plastic bottle with a nominal volume of 200 ml and a white trigger sprayer with the same type of neck. The PET bottle is lightweight and unbreakable. The white opaque wall limits light reaching the contents, which you will appreciate with hydrosols, toners and other water-based formulations that do not benefit from light. The trigger sprayer disperses the contents into a mist with a single press of the lever. The set is therefore particularly suitable for body and hair sprays, hydrosols, refreshing mists, textile and interior sprays and water-based household cleaning products. Both the bottle and the sprayer are declared as suitable for contact with cosmetic products.


How the set works

The trigger sprayer draws the contents through a tube reaching to the bottom of the bottle and, when the lever is pressed, pushes it out through the nozzle as a fine mist. Each press releases a small, consistent dose, so the product is applied evenly and without spilling. Lever operation is more comfortable than a classic top-press sprayer for frequent or repeated spraying (cleaning, textile care, refreshing hair).

The sprayer is intended for liquid, low-viscosity contents. Water-based solutions, hydrosols, toners, surfactant solutions and diluted cleaning agents pass through without problems. Thick emulsions, gels or pure oils will either not be atomised by the nozzle or will clog it. For such products, choose a different type of closure.

The sprayer tube tends to be longer than the bottle itself. If it protrudes and bends on the bottom after being screwed on, trim it with a sharp knife so that it reaches just above the bottom. The sprayer will then draw right down to the last millilitres.


Nominal and total volume

The nominal volume is the amount the bottle is intended for under normal filling. The total volume to the brim is the physical volume of the bottle up to the neck and is somewhat larger. The difference is a reserve for the tube and the immersed part of the sprayer and for free expansion of the contents with temperature changes. Fill to the nominal volume, not to the brim. Otherwise, when the sprayer is screwed on, the contents will overflow and the lever may not draw properly.


Suitable for products such as

  • Hydrosols and facial or body toners – water-based formulations applied by spraying; the white wall protects them from light.
  • Hair sprays and refreshing mists – light water-based or mildly alcoholic formulations without thickeners.
  • Textile and interior sprays – scented sprays for linen, mattresses or curtains, where the lever is more comfortable than a small sprayer.
  • Eco-friendly household cleaning – water-based cleaning and degreasing sprays, surfactant solutions, vinegar cleaners.
  • Plant sprays – nourishing or treatment solutions for leaves.

Good to know

Before first filling, wash and disinfect both the bottle and the sprayer (isopropyl alcohol or ethanol) and let them dry completely. Before use, rinse the sprayer with clean water and press it several times "empty" so it draws the contents. Repeat the procedure when changing contents. Otherwise, residues of fragrance or cleaning ingredients in the tube and nozzle will be carried over into the new product.

The PET bottle copes well with water, alcohol in common cosmetic concentrations and surfactant solutions. For formulations with a higher proportion of essential oils or with solvents (citrus terpenes, degreasers), we recommend first verifying the packaging's behaviour with the specific formulation. The plastic may soften or become cloudy over time. The same recommendation applies to the seal and spring of the sprayer.

The bottle is not intended for hot filling; let the contents cool before pouring. The set is suitable for repeated use; after thorough cleaning it can be refilled. For recycling, separate the bottle and the sprayer; the PET bottle belongs with plastics.

Only the bottle on its own has certification for direct food contact. The sprayer does not have it, so the set as a whole is not approved for food and is intended for cosmetic and drugstore use.

The set is a ready-made combination of packaging and closure. If you want to combine the bottle with a different type of closure with the same neck, you will find it in the Handymade range. For your own combination, we recommend verifying tightness, dosing and the packaging's behaviour with the specific formulation.


Frequently asked questions

Is the plastic bottle with trigger sprayer suitable for hydrosols and toners?
Yes, the set is suitable for hydrosols, toners and other water-based formulations. The white wall of the bottle limits light, which is not beneficial to water-based products with active substances, and the sprayer applies them as a fine mist. Both hydrosols and toners have low viscosity, so the nozzle draws and sprays reliably. Water-based products must always be properly preserved.
Can oil or thick body lotion be sprayed with the trigger sprayer?
No, the trigger sprayer is intended for liquid, low-viscosity contents. The nozzle sprays pure oils unevenly and becomes sticky over time, and it will not draw thick emulsions and gels at all. For oils, a pump or dropper is more suitable; for lotions and creams, a pump or lid. Keep the set for water-based and light alcoholic formulations.
Is the 200 ml trigger sprayer set approved for food contact?
No, the set as a whole is not approved for food contact. Only the bottle on its own has certification for direct food contact; the trigger sprayer does not. The whole set is therefore used for cosmetic and drugstore products, for example body and hair sprays, hydrosols, textile mists or water-based cleaning solutions.
Why is the bottle with sprayer not filled to the brim?
Because the tube and the immersed part of the sprayer take up space in the neck and inside the bottle, and the contents need a reserve for expansion with temperature changes. If the bottle is filled to the brim, the contents will overflow when the sprayer is screwed on and the lever may not draw properly. It is therefore filled to the nominal volume, which accounts for this reserve.
How is the trigger sprayer cleaned for repeated use?
The sprayer is cleaned by pumping through clean warm water and then water with a drop of ethanol or isopropyl alcohol until a clear liquid runs out. Wash and disinfect the bottle and let both dry completely. When changing products, thorough pumping-through is important especially after fragrance and cleaning ingredients, which would remain in the tube and nozzle and affect the new contents.
Does the PET bottle tolerate essential oils and alcohol?
The PET bottle tolerates alcohol in common cosmetic concentrations and water-based solutions well. For higher proportions of essential oils or for solvents in cleaning formulations, we recommend first verifying the packaging's behaviour in a short test. The plastic may soften or become cloudy and the sprayer's seal may harden. For concentrated fragrance blends, glass is the safer choice.

Parameters

Plastic bottle, white, 24/410, without cap, 200 ml

Product color
White
Country of origin
European Union
Nominal capacity
200
Diameter
47 mm
Thread type
GL24
Height
150 mm
Product material
PETPlastic

Plastic mini trigger sprayer, 24/410, white, smooth collar

Product color
White
Country of origin
China
Diameter
60 mm
Thread type
24/410
Height
54 mm
Product material
PPPlastic
Tube length
250 mm
Dose
0.2 ml
REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.