Follow the discounted products!
Nakúp ešte za 23,50€a dopravu máš zadarmo
Would you like to create account?
The transparent plastic bottle with a matte white cap is a reliable packaging option suitable for professional and artisan filling of liquid cosmetic products a... read more
0,70 € incl. VAT
The transparent plastic bottle with a matte white cap is a reliable packaging option suitable for professional and artisan filling of liquid cosmetic products and other formulations. Thanks to its well-designed shape and high-quality workmanship, the bottle is stable, easy to fill, close and use in everyday practice when producing homemade and small-scale artisan cosmetics. The transparent design allows optical inspection of the contents and easy visual control of the amount of product.
The packaging is designed to withstand common cosmetic and hygiene formulations based on water and slightly oily phases, and to be easily combined with various types of closures or dispensing systems. Thanks to its compatibility with the range of closures offered by Handymade, this bottle can be efficiently integrated into product lines with a unified visual appearance and reliable dosing.
The standalone plastic bottle is compatible with various types of closures and dispensing options (for example screw caps, droppers, sprayers or practical applicators) according to the selected parameters in the packaging material category. Combinations of containers and closures created directly on Handymade are tested and functional. However, for all combinations we always recommend performing your own compatibility test – check the sealing, the method of dispensing and the behaviour of the packaging in contact with the specific formulation, especially for products containing alcohol, essential oils or active substances.
If you plan to use the bottle with a mechanical sprayer or pump, it is recommended to first test the dose, consistency and uniformity of distribution to ensure that the chosen type of closure supports the user comfort of your final product.
All technical parameters of the packaging are stated in the enclosed Packaging Quality Certificate and in the product parameters. The technical documentation contains information on the type of material used, the recommended method of use and the suitability of the packaging for various types of fills. When planning the final product, we recommend always starting from these data and also taking into account the properties of your specific formulation.
If the packaging is manufactured according to the parameters from PET material, it is necessary to take into account the specifics of this plastic during cleaning and use. PET material should not be exposed to high temperatures, because excessive thermal load poses a risk of deformation of the packaging. For this reason it is not suitable for washing in a dishwasher or for boiling. Gentle cleaning at lower temperatures and the use of suitable disinfectants intended for packaging are recommended.
The packaging can be reused if hygiene rules are observed and it does not show visible signs of damage or wear. Before each refilling, the bottle and cap must be thoroughly cleaned and then disinfected. For disinfection we recommend using a suitable alcohol-based product, such as isopropyl alcohol or ethanol from our range, available as IPA 99 % isopropyl alcohol or Ethanol 96 % denatured plant-based. When reusing, always use clean working tools and minimise contact of the inner surfaces of the packaging with the skin of your hands.
First we recommend mechanically removing residues of the original product by rinsing with a suitable cleaning solution at room temperature. Then rinse the inside of the container with a disinfecting alcohol, for example the product IPA 99 % isopropyl alcohol or Ethanol 96 % denatured plant-based, making sure that the disinfectant also reaches the thread and the inner side of the cap. After the alcohol has acted, allow the packaging to drain and dry thoroughly at room temperature, ideally in a clean and dust-free environment. For plastic material do not use high temperatures or boiling, to avoid deformation of the bottle.
If you decide not to use the packaging further, we recommend recycling it where possible. Before placing it in sorted waste collection, remove product residues and at least roughly rinse the packaging. Then sort it into the container according to the type of material specified in the parameter table for the product – for example plastic packaging into the appropriate plastic container. The cap and bottle may be made of different plastics; therefore follow the symbols and information in the product parameters. Do not dispose of packaging in mixed household waste if sorted collection of the respective material is available where you live.
For packaging made of PET material it is important to avoid exposure to high temperatures, which may lead to undesirable deformation of the bottle walls or thread. Such packaging is therefore not suitable for washing in a dishwasher, for long-term exposure to hot water or for boiling. Gentle hand cleaning at lower temperatures and the use of alcohol-based disinfection according to the recommendations of the raw material manufacturer are recommended. Also avoid storing empty and filled bottles near heat sources, for example on a radiator or in direct sunlight behind glass, where the material may overheat.
To select suitable packaging we recommend using the advanced filter in the packaging material categories on Handymade. After clicking on the respective category (for example bottles, vials, jars or closures) you will find the filter in the upper part of the page. You can narrow your search according to several parameters – specifically by type and diameter of the neck, the desired size of the packaging, the colour of the material and also by the material itself (for example PET, HDPE, glass, etc.). In this way you can quickly select packaging that matches the properties of your formulation and the intended method of dispensing.
