Yes, the packaging can be used repeatedly if hygiene rules are observed. Before each new filling, we recommend thoroughly cleaning and disinfecting the bottle and the spray pump to minimize the risk of microbial contamination. For disinfection you can use, for example, isopropyl alcohol or ethanol in a quality suitable for cosmetic use, such as the products IPA 99% isopropyl alcohol or Ethanol 96% denatured plant-based. After treatment, let the packaging dry completely and only then fill it again.

Before cleaning, it is advisable to separate the bottle from the spray pump. You can rinse the bottle body with lukewarm water and a mild detergent, then rinse thoroughly with clean water and disinfect it with a suitable alcoholic solution. We recommend rinsing the spray pump with a small amount of clean water, or water with added alcohol, and actuating the mechanism several times to remove residues of the previous product. After washing, it is important to let all parts dry separately at room temperature, away from direct sunlight and heat sources.

Plastic packaging of this type is not intended to be exposed to high temperatures. In a dishwasher or during boiling there is a risk of deformation of the bottle and the spray pump, which may negatively affect sealing and the functionality of the mechanism. For these reasons, we recommend gentle hand cleaning at lower temperatures using a mild detergent, followed by disinfection with a suitable alcoholic preparation. In this way, the packaging will retain its shape and reliable dosing in the long term.

If you decide not to use the packaging further, we recommend first completely emptying it and, if possible, removing product residues by rinsing. Then follow the information on the material type given in the parameter table for the product – according to this, place the packaging in the appropriate separated plastic collection system in your municipality. The spray pump may consist of a combination of several plastic components; if the collection system in your area requires it, separate it from the bottle. By sorting correctly, you make it possible for the material to be reprocessed in the recycling process and not to unnecessarily burden mixed waste.

To select a suitable bottle, dropper bottle, jar or pot, you can use the extended filter, which is located at the top of the page after clicking on a specific packaging category. Using the filter, you can easily narrow down the offer according to neck type, required volume, colour and material. In this way, you will quickly find the combination of packaging and closure that matches the character of your product and the visual style of your brand.

The spray pump is ideal especially for liquid, low-viscosity formulations, such as toners, hydrolats, aqueous and alcoholic solutions, gentle hair sprays or refreshing mists for body and textiles. For thicker emulsions or oil blends, the flow may be restricted, so we recommend performing a trial filling and testing the behaviour of the dosing mechanism before placing the product on the market. In this way, you will verify whether the selected packaging corresponds to the specific composition of your product and ensures convenient application for the end user.