The bottle can be reused if hygiene principles are observed, but careful preparation is recommended before each refilling. Before reuse, the container must be thoroughly cleaned, residues of the original product removed, and then disinfected with a suitable alcohol‑based preparation, for example IPA 99 % isopropyl alcohol or Ethanol 96 % denatured plant‑based. Only then is the container suitable for another safe filling with a new formulation.

The PET material should not be exposed to high temperatures, therefore it is not recommended to use very hot fills or to leave the bottle near heat sources or in direct sunlight in an enclosed space. At excessive temperatures, there is a risk of deformation of the container, which can affect the tightness and functionality of the closure. The bottle is not suitable for dishwashers or boiling; hand cleaning with lukewarm water and a mild detergent is recommended, followed by disinfection with a suitable alcohol‑based preparation.

Before filling, we recommend working in a clean environment, using disinfected tools and preparing the container by cleaning and disinfection. After thoroughly drying the bottle, fill it with the product at an appropriate temperature to prevent damage to the PET material. After filling, tighten the closure firmly, check the tightness and briefly turn the bottle upside down to verify that there is no product leakage around the neck or closure.

If you decide not to reuse the container, it is recommended to recycle it according to the material type specified in the product parameters. After emptying, rinse the bottle as thoroughly as possible, remove any remaining contents and check the recycling symbol. Then dispose of it in the collection bin intended for that type of plastic according to the local waste sorting system. Following these rules helps to reduce the amount of waste and ensures that the packaging material can be processed again.

The easiest way to choose a suitable container is to use the advanced filter in the packaging material categories. After clicking on the relevant category, you will find the filter at the top of the page, where you can narrow down the products clearly according to parameters such as neck, size, colour or material. In this way you can quickly select bottles, jars or pots that will best match the character of your product and the desired dosing method.

This plastic bottle is especially ideal for low‑ to medium‑viscosity formulations, such as aqueous solutions, micellar waters, toners, light emulsions, lightweight body and hair products, or cleaning solutions. For thicker creams and gels, we recommend considering containers with a pump or other types of jars and pots that allow more convenient dosing. It is always advisable to carry out a trial filling to check whether the chosen container meets your expectations regarding product application.