Yes, the glass bottle is suitable for various types of liquid cosmetic products, such as serums, toners, facial solutions or special active blends. Thanks to the stable glass and high-quality closure with safety feature, it is possible to safely fill products with a higher content of active substances as well. Before final use, we always recommend testing how the specific formulation behaves in the packaging under the planned storage and use conditions.

The glass packaging can be reused if hygiene principles are observed. Before each new filling, it is necessary to thoroughly clean the bottle, rinse it and then disinfect it with a suitable alcohol solution, for example technical isopropyl alcohol or plant-based ethanol. For this purpose, you can use the products IPA 99 % isopropyl alkohol or Ethanol 96 % denaturovaný rastlinný. Only after the alcohol has completely dried and aired out is the packaging ready for new filling.

First, mechanically clean the bottle from residues of the original product, then wash it with warm water and a suitable detergent and rinse thoroughly. After drying, we recommend spraying or rinsing the inner space and the neck thread with alcohol, for example with the products IPA 99 % isopropyl alkohol or Ethanol 96 % denaturovaný rastlinný. It is appropriate to apply disinfection also to the cap and contact parts. Before reuse, let the packaging dry thoroughly and air out so that dilution or influence of the new formulation does not occur.

If you decide not to use the bottle further, we recommend recycling it responsibly according to the material composition given in the product parameters. The glass packaging is usually intended to be sorted into the glass container, while plastic or combined closures may belong in the plastic container or mixed waste according to local rules. Before placing it into the collection container, empty the bottle, if necessary rinse it from remaining contents, and, if possible, separate the glass part from the plastic cap to facilitate recycling.

To select a suitable bottle, vial or other packaging, you can use the extended filter located at the top of the page after clicking on a specific packaging category. In the extended filter you can set parameters such as neck type, size, colour or material and thus easily narrow down the offer to packaging that corresponds to your formulation and visual concept. In this way, you will quickly find packaging compatible with selected caps, droppers or spray pumps according to your requirements.