The bottle can be used repeatedly if hygiene principles are observed, but careful preparation is recommended before each new filling. Before reuse, it is necessary to clean the packaging thoroughly, remove residues of the original product and then disinfect it with a suitable alcohol‑based preparation, for example IPA 99 % isopropyl alkohol or Etanol 96 % denaturovaný rastlinný. Only then is the packaging suitable for further safe filling with a new formulation.

The PET material should not be exposed to high temperatures, therefore it is not recommended to use very hot fills or to leave the bottle near heat sources or in direct sunlight in an enclosed space. At excessive temperatures there is a risk of deformation of the packaging, which may affect the sealing and functionality of the closure. The bottle is not suitable for washing in a dishwasher or for boiling; hand cleaning with lukewarm water and a mild detergent followed by disinfection with a suitable alcohol‑based preparation is recommended.

Before filling, we recommend working in a clean environment, using disinfected tools and preparing the packaging by cleaning and disinfection. After thoroughly drying the bottle, fill it with the product at an appropriate temperature so that the PET material is not damaged. After filling, tighten the closure firmly, check the sealing and briefly turn the bottle upside down to verify that there is no product leakage around the neck or closure.

If you decide not to reuse the packaging, it is recommended to recycle it according to the type of material specified in the product parameters. After emptying, rinse the bottle as thoroughly as possible, remove any remaining contents and check the recycling symbol. Then dispose of it in the collection container designated for the given type of plastic according to the local waste‑sorting system. Adhering to these rules helps reduce the volume of waste and ensures that the packaging material can be processed again.

The simplest way to select suitable packaging is to use the extended filter in the packaging material categories. After clicking on the relevant category, you will find the filter at the top of the page, where you can narrow down the products clearly according to parameters such as neck type, size, colour or material. In this way you will quickly select bottles, jars or pots that will best match the character of your product and the desired dosing method.

This plastic bottle is ideal especially for low‑viscosity to medium‑viscosity formulations such as aqueous solutions, micellar waters, tonics, light emulsions, light body and hair care products or cleaning solutions. For thicker creams and gels, we recommend considering packaging with a pump or other types of jars and pots that allow more convenient dosing. It is always advisable to carry out a trial filling to verify whether the selected packaging meets your expectations regarding product application.