This bottle with spray pump is most suitable for watery and low-viscosity formulations such as toners, hydrolats and gentle sprays. With thicker oil-based or emulsion products, the spraying may deteriorate or the nozzle may clog. Before final filling, we recommend performing a trial filling and testing the dosing, spray pattern consistency and sealing of the packaging during long-term use.

The packaging can be used repeatedly if hygienic principles are observed, but we recommend reserving it for the same or a similar type of product. Before each new filling, the bottle and spray pump must be thoroughly cleaned and disinfected to prevent microbial contamination or undesirable reactions between residues of the original product and the new formulation. For disinfection, we recommend using isopropyl alcohol or ethanol, for example the products IPA 99 % isopropyl alcohol or Ethanol 96 % denatured plant-based, with which you briefly rinse the packaging and then allow it to dry completely.

You can first rinse the glass part of the packaging with warm water and a suitable cleaning agent, rinse thoroughly and let it dry. Afterwards we recommend disinfecting the inner surface using alcohol, for example with the products IPA 99 % isopropyl alcohol or Ethanol 96 % denatured plant-based. The spray pump should be cleaned more gently: rinse with water, if necessary briefly spray through with an alcohol solution and allow to dry completely, in order to preserve the functionality of the mechanism and seals.

We recommend storing the bottle upright, well closed and protected from direct sunlight and extreme temperatures. For long-term use, it is advisable to regularly check the functionality of the spray pump, especially with formulations containing natural extracts or essential oils, which over time may change their viscosity or leave deposits. In case of reduced spraying performance, it is good to rinse the nozzle with water or diluted alcohol to remove any build-up.

If you decide not to reuse the packaging, we recommend recycling it according to local recycling rules and the information given in the product parameters. The glass part of the packaging can usually be placed in sorted glass waste after removing any remaining contents, while the plastic and metal components of the spray pump are sorted according to their material composition. Before handing over for recycling, it is advisable to rinse the bottle, remove product residues and proceed in accordance with the recommendations of your collection system and the material labelling given for the product on Handymade.

When selecting suitable packaging, we recommend using the advanced filter, which you will find at the top of the page after clicking on the relevant packaging category. Using the filter you can clearly narrow down the offer according to key parameters such as neck type, size, colour or material. This way you will quickly find bottles, medicine bottles, jars, closures and dispensers that best match the properties of your specific product and the desired visual style.