GLASS BOTTLES 100 ml
White Glass Bottle, Glossy Gold Black Pump with Smoky Overcap, 100 ml
Pack size10 ml15 ml30 ml100 ml
A glass bottle with a pump for 100 ml of serums, facial oils and lighter emulsions that are dispensed in small amounts and without touching the contents. full description
Lowest price in the last 30 days: €2.70
Total for 1 pcs: €2.70
Quantities add up across all combinations of this bottle.
Product description
A glass bottle with a pump for 100 ml of serums, facial oils and lighter emulsions that are dispensed in small amounts and without touching the contents. White glass conceals the contents and lets less light through to them than clear glass, so it also suits formulations with light-sensitive ingredients. The black and gold glossy pump with a smoky overcap fits the neck of the bottle. You receive a ready-made set and do not need to buy anything else.
What the set is suitable for
- Facial and hair serums – a small dose per press corresponds to the amount normally applied to the face or to the ends of the hair.
- Facial and body oils – the oil does not spill out of the bottle. The pump dispenses it drop by drop and the packaging stays clean on the outside.
- Light emulsions and fluids – liquid to medium-thick textures that the pump can still draw up.
- Massage and treatment blends – the contents are dispensed with one hand, which is practical when working with a client as well as at home.
Pump and dispensing
One full press delivers approximately 0.14 ml. For a serum this is usually one to two doses, and for a body oil more, as needed. The smoky overcap covers the pump head and protects it from dust and from accidental pressing during transport. It can be removed and put back at any time.
Thick creams and butters are not suitable for this type of pump. The pump draws them up only with difficulty or not at all, so for a thicker formulation we recommend testing how it behaves before you fill the whole batch. The tube reaches the bottom of the bottle. If it rests against the bottom and bends after the pump is fitted, you can shorten it slightly with a straight cut.
After the first filling, press the pump several times without dispensing until the tube and the mechanism fill with the contents. Only then does it dispense evenly.
Volume and filling
The nominal volume of the bottle is 100 ml, and it is filled up to this level. The brimful capacity given in the parameters is the physical volume up to the neck. The difference between them is a reserve for the tube and the body of the pump, which take up part of the space once fitted, and for the expansion of the contents when the temperature changes. If the bottle were filled to the brim, the contents would be pushed out through the neck when the pump is screwed on.
As the glass is white, the liquid level cannot be seen from the outside. When filling, it is therefore worth measuring the volume in advance or filling on a scale.
Good to know
- Preparation before the first filling – wash the bottle, disinfect it with isopropyl alcohol or ethanol and let it dry completely. Run the alcohol through the pump and let it evaporate.
- Suitability for cosmetics – the bottle has a declared suitability for use with cosmetic products. For the pump, we recommend checking compatibility with your specific formulation, especially with a higher proportion of essential oils, alcohol or solvents, which put more strain on plastic parts and seals than ordinary oils and emulsions.
- Food – the set is not intended for contact with food.
- Glass and temperature – let the contents cool to room temperature before filling and avoid sudden temperature changes, for example a hot phase in a cold bottle.
- Reuse – after thorough washing, the bottle can be used again without limitation. The inside of the pump cannot be cleaned completely, so when you change the formulation or fragrance, we recommend fitting a new pump.
- Other closures – if you want to use the bottle with a cap, a dropper or a sprayer, you will find ready-made combinations in the Handymade range. For your own combination, we recommend checking the seal and the dispensing with your specific formulation.
- Recycling – the bottle goes into glass recycling, and the pump is a combination of plastic and aluminium. Unscrew it from the bottle before disposal.
Do not use the pump for mixtures with coarser particles, for example scrub granules or undissolved powder. The mechanism will clog and the dose will no longer be consistent.
Frequently asked questions
Parameters
Glass bottle, vial, white, 100 ml
Product documentation
- PPWRPackaging Declaration (PPWR)
- PDF ↓
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.
















































































