GLASS BOTTLES 30 ml
White Glass Bottle, Glossy Golden Black Pump with Smoky Overcap, 30 ml
Pack size10 ml15 ml30 ml100 ml
Glass medicine bottle, white, 30 ml with a black and gold glossy pump is packaging for facial serums , light emulsions and oil blends that are applied in small doses. full description
Lowest price in the last 30 days: €2.35
Total for 1 pcs: €2.35
Quantities add up across all combinations of this bottle.
Product description
Glass medicine bottle, white, 30 ml with a black and gold glossy pump is packaging for facial serums, light emulsions and oil blends that are applied in small doses. The opaque white glass hides the contents and limits the light reaching more sensitive ingredients. The pump with a dip tube dispenses the contents without the customer touching the neck or reaching into the bottle with their fingers. The smoky overcap covers the pump during storage and transport and is removed before use.
The volume of 30 ml corresponds to a common size for a facial serum, so the set is also suitable for small batches when testing formulations or for gift packaging of your own products.
What the set is suitable for
- Facial serums and essences – water-based and gel formulations with low to medium viscosity, which the pump draws up through the dip tube without any problem.
- Light emulsions and lotions – liquid creams for the face, eye area or décolleté, where the product is dispensed precisely and repeatedly.
- Oil serums and blends of vegetable oils – white glass dims the light, which helps oils prone to oxidation.
- Make-up primers and liquid treatment products – anywhere the customer needs the same dose without pouring.
Thick creams and butters do not belong in this set. The pump will not draw them up through the dip tube, or it will jam. For thicker products, we recommend testing the tightness and function of the pump on the first filled bottle.
Nominal and total volume
The nominal volume is the amount the bottle is designed for under normal filling. The total brimful volume stated in the parameters is the physical volume up to the neck. The difference between them is a reserve for the pump and dip tube, which take up part of the space once screwed on, and for the expansion of the contents when the temperature changes. The bottle is therefore filled to the nominal volume, not to the brim. If you overfill it, the contents will be pushed out through the neck when the pump is screwed on.
One press of the pump dispenses approximately 0.14 ml. It is worth stating the number of presses per use in the instructions for use of your product as well.
Preparation and filling
Before the first filling, wash the bottle, disinfect it with isopropyl alcohol or ethanol and leave it to dry completely with the neck facing down. Rinse the pump with clean water or ethanol and leave it to dry as well. Residual water would dilute the first doses and could compromise the preservation.
The dip tube of the pump is longer than the bottle and is meant to reach close to the bottom. Shorten it with a sharp knife using a diagonal cut, so that it does not press against the bottom and the pump can draw up even the last remainder of the contents. Fill using a funnel or from a beaker with a spout; for thicker emulsions, a dosing syringe helps. After screwing on the pump, press it several times until the contents rise into the tube.
Good to know
Glass does not tolerate sudden temperature changes well. Before filling, let a warm emulsion cool to at least room temperature, which also reduces the risk of condensation under the pump. We recommend first testing oil blends and products with a higher proportion of essential oils with the pump on a single piece. Plastic parts and the seal react differently to some ingredients, and the behaviour with a specific formulation cannot be guaranteed in advance.
The bottle has a declaration of suitability for use with cosmetic products. This declaration is not available for the pump, so verify the compatibility of the set with the finished product on your own batch. The set is not intended for contact with food.
The pump is not an airtight system. For formulations sensitive to oxidation, allow for air entering the bottle after each press and adjust the antioxidant content and the recommended period of use after opening accordingly.
The bottle can be reused after washing and disinfection. The pump withstands repeated use if you rinse it after emptying. When changing the type of contents, it is cleaner to fit a new one. Closures with the same neck type and other ready-made bottle and closure combinations can be found in the Handymade range. For your own combination, we recommend verifying the tightness and dispensing.
Once empty, the glass bottle belongs in glass recycling. The pump is made up of plastic and aluminium parts, so separate it from the bottle before recycling.
Frequently asked questions
Parameters
Glass bottle, vial, white, 30 ml
Product documentation
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.

























































































