PLASTIC BOTTLES
White Plastic Bottle, White Lotion Pump With Glossy Gold Collar, 200 ml
Pack size100 ml150 ml200 ml250 ml300 ml
White plastic bottle, white and gold pump, 200 ml The white plastic bottle with a pump is used for filling liquid and medium-thick cosmetic products that are dispensed by pressing: liquid soap, shower gel, shampoo, body… full description
Lowest price in the last 30 days: €1.26
Save €0.02 with this set
Total for 1 pcs: €1.26
Quantities add up across all combinations of this bottle.
Product description
White plastic bottle, white and gold pump, 200 ml
The white plastic bottle with a pump is used for filling liquid and medium-thick cosmetic products that are dispensed by pressing: liquid soap, shower gel, shampoo, body lotion or a light cream. The PET bottle with a nominal volume of 200 ml is lightweight, and its opaque white wall limits the amount of light reaching the contents. The white pump with a gold element completes the bottle so that the set works as a retail pack for the finished product.
The set is declared suitable for contact with cosmetics.
How to use the set
The pump with a 24/410 neck finish screws onto the neck of the bottle, and each press of the head dispenses approximately 1 ml of the contents. The dip tube runs into the bottle. If it reaches past the bottom, shorten it with a diagonal cut so that it ends just above the bottom. When using the pump for the first time, press the head several times until the tube and the mechanism fill.
The pump draws up liquid and medium-thick products. Thick creams, butters or products with solid particles, such as scrubs, will not pass through the tube or will be dispensed unevenly. For your own recipe, we recommend filling a test bottle and checking that the contents are dispensed smoothly and do not start leaking from the head after a few days.
The nominal volume is the volume the bottle is designed for under normal filling. The brimful capacity is the physical volume up to the neck and is slightly larger. The difference is a reserve for the pump with its tube and for the expansion of the contents, so the bottle is filled up to the nominal volume, not to the brim.
Pour the emulsion or gel into the bottle only after it has cooled to room temperature. PET is not intended for filling with hot contents, and a warm mass would contract as it cools, which can deform the wall of the bottle.
What the set is suitable for
- Liquid soap and shower gel – one-handed dispensing at the sink or in the shower; the 200 ml volume corresponds to a standard pack size.
- Shampoo and liquid conditioner – a liquid to medium-thick consistency passes through the tube without problems.
- Body and face lotion – light emulsions are dispensed evenly, and the contents are not exposed to air with every use as they would be in an open jar.
- Massage and body oil – vegetable oils are dispensed easily; with a higher proportion of essential oils, we recommend checking how the packaging behaves.
Good to know
Before the first filling, wash both the bottle and the pump, disinfect them with isopropyl alcohol or ethanol and let them dry completely. Residual water in the tube would get into the product and put a strain on its preservative system.
The PET bottle withstands standard cosmetic formulations, including water-based, emulsion and oil-based ones. Higher concentrations of essential oils, solvents and products with a high alcohol content may damage the plastic over time or change its appearance. For such products, we recommend testing in a filled bottle and monitoring the wall, the tube and the seal.
The set can be reused. Before a new filling, run clean water through the pump several times to flush the residues of the previous product out of the tube and the mechanism, and let both parts dry. The bottle has a 24 mm neck; closures with the same neck type and ready-made combinations can be found in the Handymade range. If you are making your own combination, check the tightness and dispensing with your specific formulation.
The set is not approved for contact with food. Only the bottle on its own has a certificate for direct food contact; with the pump, the packaging is intended exclusively for cosmetics.
The bottle is made of a single material, PET, and belongs in plastic waste. The pump combines PP plastic and aluminium, so separate it from the bottle before disposal.
Frequently asked questions
Parameters
Plastic bottle, white, 24/410, without cap, 200 ml
- Product colour
- White
- Country of origin
- European Union
- Nominal capacity
- 200
- Diameter
- 47 mm
- Thread type
- GL24
- Height
- 150 mm
Product documentation
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.
































































