White Plastic Bottle, White Lotion Pump With Glossy Silver Collar, 200 ml

White plastic bottle with white and silver pump, 200 ml

A ready-made combination of a white 200 ml PET bottle and a pump with a 24/410 neck finish, ready for filling with liquid cosmetic products. One press dispenses a measured dose, so the contents are dispensed without unscrewing anything and without touching the neck. The white wall of the bottle also limits the amount of light reaching the contents, which helps with formulations containing vegetable oils, essential oils or light-sensitive active ingredients.

The volume and dispensing method suit body lotions, liquid soaps, shampoos, conditioners, shower gels and cleansing gels. It is also suitable for massage and body oils and for lighter creams that the pump can draw up. The lightweight PET bottle withstands everyday use in the bathroom as well as transport in a bag.

How the set works

• Pump – a white head with a silver element, made from a combination of plastic and aluminium. One full press dispenses approximately 1 ml of the contents, so the customer does not have to estimate the amount and the product is used up evenly.
• Bottle – a white PET bottle with a GL24 thread, onto which the 24/410 pump fits directly. The white material dampens light, but the contents cannot be seen through it. Keep this in mind for products where the customer should be able to monitor the remaining amount.
• Hygienic dispensing – the contents leave the bottle only through the pump head. Fingers do not come into contact with the product in the bottle, which you will appreciate especially with leave-on cosmetics.

Nominal and total volume

The 200 ml figure is the nominal volume, that is, the amount the bottle is designed to hold when filled normally. The physical volume up to the neck is larger. The difference provides room for the pump’s dip tube and for the expansion of the contents when the temperature changes. The bottle should therefore be filled up to the nominal volume, not to the brim. If it were filled up to the neck, part of the contents would be pushed out when the pump is fitted and the seal might not seat correctly.

Good to know

Before first filling, we recommend washing the bottle and the pump, disinfecting them with isopropyl alcohol or ethanol and leaving them to dry completely. It is enough to rinse the pump several times with clean water and pump it empty so that no water remains inside.

The pump handles liquid to medium-thick products. Thick creams, butters and balms will not be drawn up the tube or will clog the mechanism; jars or containers are more suitable for them. We recommend testing the thickness of your specific formulation on a single piece before filling a larger batch, or adjusting the proportion of thickener.

The declaration of suitability for contact with cosmetic products and for direct contact with food applies to the bottle on its own. The pump is supplied in cosmetic and technical grade, so the set as a whole is not approved for contact with food and is intended for cosmetics. For homemade oils, syrups or infusions, choose a bottle with a closure that has its own certificate.

Once empty, the set can be washed and refilled. Take the pump apart, rinse the tube and the head with warm water and leave them to dry so that no residue of the previous product remains in the mechanism. The bottle is made of PET and belongs in plastic waste. The pump combines plastic and aluminium, so separate it from the bottle before disposal.

Closures with the same neck type and other ready-made bottle and closure combinations can be found in the Handymade range. If you make your own combination, we recommend checking the tightness, dispensing and behaviour of the packaging with your specific formulation.

Frequently asked questions