PLASTIC BOTTLES
Amber Plastic Bottle, White Cap, 100 ml
Pack size100 ml150 ml200 ml300 ml
The amber plastic bottle with a white ribbed cap is a ready-made packaging and closure set for 100 ml of cosmetics that are dispensed by pouring. full description
Lowest price in the last 30 days: €0.53
Total for 1 pcs: €0.53
Quantities add up across all combinations of this bottle.
Product description
The amber plastic bottle with a white ribbed cap is a ready-made packaging and closure set for 100 ml of cosmetics that are dispensed by pouring. The amber colour filters light and so protects contents that spoil faster in light, such as vegetable and massage oils, face serums or oils with a higher proportion of unsaturated fatty acids. The PET bottle is lightweight and, unlike glass, does not break when dropped, which is useful in the bathroom, when travelling and when sending products to customers. The cap is included in the pack, so you do not need to buy it separately or match it by thread.
What the set is suitable for
This bottle, with its screw cap and no dispensing opening, is for contents that pour easily and do not need to be dispensed drop by drop or sprayed:
- Body and massage oils – the 100 ml volume matches both a common retail size and trial samples.
- Liquid soaps and shower gels – for smaller batches or when testing recipes, a simple cap is enough and a pump can be added later.
- Hydrosols, toners and facial waters – the packaging keeps them away from direct light, and the cap is sufficient for applying them with a cotton pad.
- Cleansing oils and hair oils – both thicker and thinner oil blends pour without problems.
- Intermediate and semi-finished products – stocks of the oil phase, infusions or pre-mixed blends for further processing.
The set is declared as suitable for contact with cosmetics, and the declaration of conformity is available with the product. The set is not intended for food use.
Filling and volume
The name states the nominal volume, that is, the amount the bottle is designed for under normal filling. The physical volume up to the neck is larger and you will find it in the parameters as the total brimful volume. The difference provides a margin for the cap and for the expansion of the contents when the temperature changes. Therefore, fill up to the nominal volume. An overfilled bottle overflows when closed, and the contents get onto the thread, where they dry and make the bottle harder to open.
Fill the bottle with contents cooled to room temperature. Warm emulsions or oils can deform PET, and after cooling in a closed bottle, a vacuum forms that pulls the walls inwards.
Closure and sealing
The white PP cap with a 24/410 neck finish has a foamed polyethylene (EPE) liner inside. When tightened, it presses against the neck and seals the bottle even when turned upside down. The ribbed surface makes it easier to grip with wet or oily hands. Tighten the cap by hand, without force. Overtightening can permanently compress the liner and worsen the seal.
If you want to use the same bottle with a different method of dispensing, in the Handymade range you will find closures with the same neck type, as well as ready-made combinations of a bottle with a pump or a sprayer. For your own combination, we recommend checking the seal and the dispensing with your specific formulation.
Good to know
Before the first filling, wash the bottle and the cap, disinfect them with isopropyl alcohol or ethanol and let them dry completely. Residual water in the neck or under the cap liner would get into anhydrous contents and could become a breeding ground for microorganisms.
PET is resistant to water, vegetable oils and common cosmetic emulsions. For contents with a high proportion of essential oils, alcohol or solvents, we recommend checking how the material behaves on a single piece before you fill the whole batch. Aggressive chemicals do not belong in this packaging at all. The same recommendation applies to the cap liner, which is in contact with the contents every time the bottle is turned upside down.
The amber colour filters light, but the bottle is not opaque. Products that are significantly damaged by light should be stored away from direct sun or in a box, even in this packaging.
After washing, the bottle can be reused. If the cap liner is worn or deformed, replace the cap. At the end of their life, the bottle and the cap belong in sorted plastic waste; simply empty and rinse them.
Frequently asked questions
Parameters
Brown plastic bottle, 24/410, 100 ml
- Product colour
- Brown
- Country of origin
- European Union
- Nominal capacity
- 100
- Brimful capacity
- 117 ml
- Diameter
- 44 mm
- Thread type
- 24/410
- Height
- 98 mm
Plastic cap, 24/410, ribbed, white
Product documentation
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.





































































