GLASS BOTTLES up to 10 ml
Ambre Glass Bottle, Glossy Gold Black Pump with Smoky Overcap, 10 ml
Pack size10 ml15 ml30 ml50 ml100 ml
This amber glass 10 ml medicine bottle with a glossy black and gold pump is used for filling small volumes of face serums, oils and concentrates where precise and clean dispensing matters. full description
Lowest price in the last 30 days: €1.04
Total for 1 pcs: €1.04
Quantities add up across all combinations of this bottle.
Product description
This amber glass 10 ml medicine bottle with a glossy black and gold pump is used for filling small volumes of face serums, oils and concentrates where precise and clean dispensing matters. Amber glass filters light, so it suits contents that are sensitive to light, for example oil serums with vitamins or blends with essential oils. The pump dispenses the same small amount with every press, so there is no need to tilt the bottle or scoop the contents out with your fingers. The 10 ml volume also works well for samples, travel packs or the first batch of a new recipe.
The bottle and pump are supplied together as a ready-made set. The glossy black and gold pump head gives the small bottle the look of a finished product. The clear, smoky overcap covers the pump head and protects it from dust during storage and transport.
What the set is suitable for
- Face serums and concentrates – liquid and slightly thick serums that are applied in drops; one press corresponds to a usual dose for the face.
- Oil serums and beard oils – vegetable oils and their blends pass through the tube without problems, and amber glass slows their oxidation caused by light.
- Products with essential oils – the small volume and dark glass are an advantage with fragrance blends and aromatherapy serums.
- Samples and test batches – 10 ml is enough to try out a formulation or to prepare a sample for a customer, in the same packaging as the full size.
How the pump works
The pump draws the contents up through the tube and dispenses approximately 0.14 ml when the head is pressed. It works best with liquid and slightly viscous contents: serums, oils and fluids. Thick creams, balms or butters will not be drawn up by the tube and the mechanism may become blocked. The pump is also not recommended for contents with solid particles, for example pigment powders or sediment from extracts.
After the bottle is filled, the pump is primed by pressing it several times until the tube fills and the head starts to dispense the full dose. If the tube extends beyond the bottom of the bottle, shorten it with a diagonal cut before fitting so that it ends just above the bottom. The diagonal cut prevents the end of the tube from sticking to the bottom.
The pump releases the contents only when the tube reaches into the liquid. The last remnants at the bottom therefore cannot be used with the pump, so take this into account when calculating the number of doses per pack.
Nominal volume and brimful volume
The nominal volume is the volume the medicine bottle is intended for during normal filling. The total brimful volume is the physical volume up to the neck and you can find it in the parameters. The difference between them is a reserve that accommodates the tube and the head when the pump is fitted, and it also leaves room for the contents to expand when the temperature changes. The bottle is filled to the nominal volume, not to the brim. If it is overfilled, the contents will overflow through the neck when the pump is screwed on or remain in the thread and dry out.
Contact with contents: cosmetics and food
The glass bottle on its own has a declaration of suitability for contact with cosmetics and for direct contact with food. The set as a whole is intended for cosmetic use. No such declaration is available for the pump, so we recommend checking how its plastic parts behave with your specific contents when you develop your own formulation. The set with the pump is not intended for food, for example homemade oils or syrups. The declaration of conformity and the certificate of analysis for the bottle are provided with the product.
Good to know
- Preparation before first filling – wash the bottle and the pump, disinfect them with isopropyl alcohol or ethanol and let them dry completely. Moisture in the bottle is harmful to both anhydrous and water-based products.
- Filling – a funnel or a needleless syringe helps with the narrow neck. Pour in the contents once they have cooled; warm contents contract as they cool and the level drops.
- Contents in the pump – part of the product remains in the tube and in the mechanism together with air. With water-based serums it is therefore worth verifying the stability of the finished product directly in this packaging.
- Reuse – the glass bottle can be reused after washing and disinfection. The pump is harder to clean, so it is safer to use a new one when the contents change.
- Recycling – the bottle belongs in glass recycling. The pump is a combination of plastic and aluminium, so unscrew it from the bottle before disposal and sort it separately.
The plastic parts of the pump may soften or change colour during longer contact with a high proportion of essential oils, alcohol or solvents. With such contents, leave the filled bottle to stand for several weeks and check the tube, the tightness and the dispensing before you put the product on sale.
Frequently asked questions
Parameters
Amber Glass Bottle, Type A, 10 ml
- Product colour
- Brown
- Country of origin
- European Union
- Nominal capacity
- 10
- Brimful capacity
- 14 ml
- Diameter
- 25 mm
- Thread type
- 18/410
- Height
- 60,7 mm
- Product material
- Glass
Product documentation
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.





















































































