GLASS BOTTLES 30 ml
Amber Glass Bottle, Glossy Gold Black Pump with Smoky Overcap, 30 ml
Pack size10 ml15 ml30 ml50 ml100 ml
The amber glass medicine bottle with a nominal volume of 30 ml , a glossy black and gold pump and a smoky overcap is a ready-made set for filling with facial serums, oils and light emulsions that are applied in small… full description
Lowest price in the last 30 days: €1.24
Total for 1 pcs: €1.24
Quantities add up across all combinations of this bottle.
Product description
The amber glass medicine bottle with a nominal volume of 30 ml, a glossy black and gold pump and a smoky overcap is a ready-made set for filling with facial serums, oils and light emulsions that are applied in small amounts. Amber glass dampens light, so contents sensitive to oxidation, for example an oil with a high proportion of unsaturated fatty acids or a vitamin C serum, keep better in this packaging than in a clear bottle. The pump dispenses the product when pressed, without opening the packaging, which limits contact of the contents with air and fingers with each use.
The set is supplied as a bottle and pump together, so there is no need to choose the closure separately. The dark glass, glossy black and gold pump head and smoky overcap give the packaging an appearance suitable for sale or gifting. The overcap also covers the pump head and protects it from dust.
What the set is suitable for
- Facial serums – water-based and oil-based serums with active ingredients, where an exact and repeatable amount per application matters.
- Facial and hair oils – vegetable oils and oil blends that are dispensed in small amounts.
- Light fluids and emulsions – liquid to slightly thick emulsions for the face, the eye area or the décolleté.
- Smaller packs and samples – the 30 ml volume is suitable for testing a formulation, for a travel pack or for a customer who wants to try the product first.
How to work with the pump
With one press, the pump dispenses approximately 0.14 ml of product, which is a small dose for a single application of serum or oil to the face. It draws the contents up through a tube from the bottom of the bottle, so almost all of the product is used and the bottle does not need to be tilted. The head is made from a combination of PP and aluminium. The smoky overcap is removed before use and put back on after application.
The pump works best with liquid to slightly viscous contents. With thicker creams or gels, the dose may be incomplete or air may get into the tube. We recommend testing how your specific formulation behaves in the pump on one piece before filling a larger batch.
The pump tube may be longer than the height of the bottle. If it bends against the bottom when you fit it, shorten it with a sharp knife or scissors so that it ends just above the bottom. The pump then draws up the contents right to the end and no air gap is left.
Nominal and total volume
The nominal volume is the volume the bottle is designed for during normal filling. The total brimful volume is the physical volume up to the neck, and you can find it in the parameters. The difference between the two values provides a reserve for the pump tube and for the expansion of the contents when the temperature changes. The bottle is filled up to the nominal volume, not to the brim. If it is filled to the brim, the contents are pushed out through the neck when the pump is fitted and the thread will not seal.
Good to know
Before the first filling, wash the bottle, disinfect it with isopropyl alcohol or ethanol and leave it to dry completely. The pump is disinfected by rinsing it with ethanol and pressing it several times until all the liquid has been pushed out of the tube. The contents are poured into the bottle after cooling, not directly from the hot phase.
For contents with a high proportion of essential oils, alcohol or solvents, we recommend checking how the plastic and aluminium parts of the pump behave after longer contact. Glass is resistant to these substances, but the pump is exposed to the contents with every press.
After washing and disinfection, the glass bottle can be used repeatedly. The pump has an internal mechanism that cannot be cleaned thoroughly, so we recommend replacing it with a new one when you change the product. The bottle belongs in glass recycling, while the pump is made of plastic and aluminium and is separated from the bottle before recycling.
The glass medicine bottle on its own has a declaration of suitability for contact with cosmetics and for direct contact with food. No such declaration is available for the pump, so the set as a whole is not approved for contact with food, and we recommend verifying the compatibility of the pump with your specific cosmetic formulation.
The bottle has the neck type given in the parameters. You can find other closures with the same neck type, as well as ready-made combinations, in the Handymade range. If you combine the bottle with a different closure yourself, we recommend verifying the tightness and dispensing with your specific formulation.
Frequently asked questions
Parameters
Glass bottle, vial, 18 mm, 30 ml
- Product colour
- Brown
- Country of origin
- European Union
- Nominal capacity
- 30
- Brimful capacity
- 36 ml
- Diameter
- 33 mm
- Thread type
- 18/410
- Height
- 80,2 mm
- Product material
- Glass
Product documentation
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.
























































































