+421 950 333 113info@handymade.storeHandymade Days: −10 % on all ready-made productsShop now

GLASS BOTTLES 50 ml

Clear Glass Bottle, Black Tamper Evident Safety Cap & Dropper, 50 ml

Pack size5 ml10 ml12 ml15 ml30 ml50 ml100 ml

A 50 ml glass bottle, a short plastic dropper insert and a black safety cap together form packaging for liquid cosmetic products that are dispensed drop by drop. full description

AvailabilityIn stock · 1574 pcs
Product codeO18SP050-OVV18PC3
€0.72incl. VAT

Lowest price in the last 30 days: €0.72

Save €0.03 with this set

Volume pricing
1–98 pcs€0.72Your price
99–1088 pcs€0.72−1 % · 1× plato
1089–5048 pcs€0.68−5 % · 11× plato
from 5049 pcs€0.64−11 % · 51× plato

Total for 1 pcs: €0.72

Quantities add up across all combinations of this bottle.

Add 98 more pcs and the price drops to €0.72/pc.

Product description

A 50 ml glass bottle, a short plastic dropper insert and a black safety cap together form packaging for liquid cosmetic products that are dispensed drop by drop. The dropper insert fitted in the neck releases only a small amount each time the bottle is tilted, so the contents do not spill and the dose can be counted. The clear glass shows the colour and the remaining amount. The set is suitable for face and body oils, serums, blends of essential oils in a carrier oil or oil tinctures, where you work with just a few drops at a time.

The set as a whole is declared suitable for contact with cosmetics. Only the glass bottle on its own has a certificate for direct food contact; the dropper insert and the cap do not, so the set is intended for cosmetic products. Declarations of conformity are provided for the individual components.


How to work with the set

Fill the bottle without the dropper insert, through the open neck with the 18/410 thread. Only then press the dropper insert into the neck so that its rim sits on the opening, and finally screw on the cap. To dispense, tilt or turn the bottle over and the liquid flows out drop by drop through the opening in the centre of the dropper insert.

The dripping speed depends on how fluid the contents are. Thicker oils, for example castor or avocado oil, drip slowly and evenly. Thin liquids, such as aqueous solutions or alcohol extracts, flow out faster. So check the dispensing on a trial filling before you start filling a larger batch.

Fill the bottle up to the nominal volume of 50 ml, not to the brim. The dropper insert pushed into the neck takes up part of the space, and if the bottle is overfilled, the contents would be forced out when you fit the insert.


Nominal and total volume

The nominal volume is the amount the bottle is designed for in normal filling. The brimful volume listed in the parameters is the physical volume up to the neck. The difference between them is a reserve for the dropper insert and for the expansion of the contents when the temperature changes, for example when an oil moves from a cool workshop into a warm bathroom. Base your formulation on the nominal volume.


What it is suitable for

  • Face oils and oil serums – the dropper insert dispenses a single-use amount and the glass does not absorb the scent of the contents.
  • Blends of essential oils in a carrier oil – diluted massage or aromatherapy blends that are measured out by the drop.
  • Oil tinctures and macerated oils – the 50 ml volume suits products that are used up within a few weeks.
  • Samples and test batches – through the clear bottle you can watch the colour and any changes in the contents during a stability test.

Good to know

Clear glass does not provide protection from light. Store oils prone to oxidation and products containing essential oils in a box or in the dark.

Glass does not tolerate sudden temperature changes well. Let hot contents cool before filling, and do not put the bottle straight from the cold into hot water.

Before the first filling, wash the bottle with warm water and washing-up liquid, disinfect it with isopropyl alcohol or ethanol and let it dry completely. The dropper insert and the cap are disinfected in the same way, without soaking in hot water.

The dropper insert is made of polypropylene, the cap of polypropylene and polyethylene. With concentrated essential oils, strong solvents or products with a high alcohol content, check how the plastic parts behave with your particular formulation, especially their tightness during longer storage.

Closures with the same neck type and ready-made bottle + closure combinations can be found in the Handymade range. If you choose your own combination, check the tightness, the dispensing and the behaviour of the packaging with your formulation.

The bottle belongs in glass waste; the dropper insert and the cap are plastic and are separated from the glass before recycling.


Frequently asked questions

Does a clear glass bottle with a dropper insert protect the contents from light?
No, clear glass lets light through and does not protect the contents from it. It is suitable for products that are used up quickly, or for those stored in a box or in the dark. For an oil prone to oxidation or an essential oil blend that is to be kept longer, it is better to fill a dark glass bottle with the same 18/410 thread.
How much liquid fits into a 50 ml glass bottle with a dropper insert?
The bottle is filled up to the nominal volume of 50 ml. The brimful volume is larger, but this space remains as a reserve for the dropper insert pushed into the neck and for the expansion of the contents when the temperature changes. If the bottle is filled to the brim, part of the liquid is forced out when the dropper insert is fitted.
Is a glass bottle with a dropper insert suitable for essential oils?
Yes, for diluted blends of essential oils in a carrier oil. Glass does not react with essential oils and does not absorb their scent. The dropper insert and the cap are made of plastic, so with concentrated essential oils or blends with a high alcohol content, check the tightness and the behaviour of the plastic parts during longer storage.
Can this set be used for food, for example for edible oil?
The set as a whole is not approved for contact with food. Only the glass bottle on its own has a certificate for direct food contact; the dropper insert and the cap do not. The whole set with the dropper insert and cap is therefore intended for cosmetic products.
Can the bottle with a dropper insert be reused, and how is it cleaned?
The glass bottle can be reused. Wash it with warm water and washing-up liquid, disinfect it with isopropyl alcohol or ethanol and let it dry completely. The dropper insert has a narrow opening and is harder to clean after oils, so it is better to replace it with a new one when you change the contents. The cap only needs to be washed and disinfected in the same way as the bottle.

Parameters

Clear glass bottle, 18 mm, 50 ml

Product colour
Clear
Country of origin
European Union
Nominal capacity
50
Brimful capacity
61 ml
Diameter
39 mm
Thread type
18/410
Height
92,9 mm
Product material
Glass

Plastic dropper for glass vials, 18 mm, short

Product colour
Clear
Country of origin
China
Diameter
14,5 mm
Thread type
18/410
Height
17,5 mm
Product material
PPPlastic

Black Tamper Evident Safety Cap, 18/410

Product colour
Black
Country of origin
China
Diameter
23,9 mm
Thread type
18/410
Height
23 mm
Product material
PPHDPEPlasticLDPE

Product documentation

PPWRPackaging Declaration (PPWR)
Clear glass bottle, 18 mm, 50 ml · O18SP050PDF ↓
Plastic dropper for glass vials, 18 mm, short · OVV18KKPDF ↓
Black Tamper Evident Safety Cap, 18/410 · OVV18PC3PDF ↓
PDSProduct Data Sheet
Clear glass bottle, 18 mm, 50 ml · O18SP050PDF ↓
Plastic dropper for glass vials, 18 mm, short · OVV18KKPDF ↓
Black Tamper Evident Safety Cap, 18/410 · OVV18PC3PDF ↓
DrawingTechnical drawing
Clear glass bottle, 18 mm, 50 ml · O18SP050PDF ↓
Black Tamper Evident Safety Cap, 18/410 · OVV18PC3PDF ↓
Download all (ZIP)

8 PDF files in one archive

REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.