GLASS BOTTLES 30 ml
Clear Glass Bottle, Glossy Black Dropper, 30 ml
Pack size10 ml12 ml15 ml30 ml50 ml100 ml
A 30 ml glass bottle with a black glossy dropper is supplied as a ready-made set, prepared for filling with serums, facial oils and tinctures. full description
Lowest price in the last 30 days: €1.00
Total for 1 pcs: €1.00
Quantities add up across all combinations of this bottle.
Product description
A 30 ml glass bottle with a black glossy dropper is supplied as a ready-made set, prepared for filling with serums, facial oils and tinctures. The clear glass shows the contents, so the customer immediately sees the colour of the oil or the clear serum, and the dropper dispenses drop by drop without spilling.
Glass is chemically stable and can be washed repeatedly. The black aluminium ring with a glossy finish stands out on the shelf. The set is declared suitable for contact with cosmetics, and you can find the declaration of conformity with the product.
Suitable uses
- Facial serums and oil serums – the dropper measures out a few drops onto the palm, and the contents do not come into contact with your fingers during dispensing.
- Essential oil blends and fragrance blends – the clear bottle shows the shade of the blend, and the dropper makes precise dispensing into a diffuser or another formulation easier.
- Tinctures and alcohol extracts – these are dispensed drop by drop, which the dropper makes possible.
- Samples and test batches – a volume of 30 ml lasts for several weeks of use and is at the same time small enough for sending out samples.
- Oil for nails, beards or hair ends – products used in small amounts at a time.
Nominal and total volume
The bottle is intended to be filled up to the nominal volume of 30 ml. The total brim-full volume, that is the physical volume up to the neck, is larger and you can find it in the parameters. The difference provides a reserve for the glass tube of the dropper, which displaces part of the contents upwards when screwed in, and for the expansion of the contents with temperature changes. A bottle filled to the brim would overflow after the dropper is fitted or would push the contents into the thread.
When filling, leave the level a few millimetres below the lower edge of the neck. After screwing on the dropper, check that no contents leak around the thread and, if necessary, tighten it once more.
Working with the dropper
The dropper consists of a glass tube, a silicone squeeze head and an aluminium ring with a thread. The length of the dropper matches this bottle, so the tube reaches almost to the bottom and dispenses the remainder of the contents as well. Squeezing the head draws in the contents and releasing it dispenses them drop by drop. The amount is regulated by finger pressure. Thicker oils flow more slowly and the drops are larger, so leave more time between drops. Thin water-based serums run out quickly, so hold the dropper vertically and close to the point of application.
The bottle has the same neck type as other closures in the Handymade range, and you can also find ready-made combinations for it. For your own combination, we recommend verifying the tightness and behaviour of the packaging with your specific formulation.
Good to know
Before first filling, wash the bottle and the dropper, disinfect them with isopropyl alcohol or ethanol and let them dry completely. Residual water in the glass tube would get into an anhydrous product and could spoil it.
Clear glass does not protect the contents from light. It is suitable for raw materials that withstand light, for products with a short period of use and for samples. Light-sensitive formulations, for example serums with vitamin C or retinol and essential oil blends, should be stored in this packaging in the dark, or you should choose dark glass.
The silicone head does not come into contact with the contents during normal use, as the liquid stays in the glass tube. If the bottle is tilted incorrectly, however, the liquid can be drawn up into the head. For concentrated essential oils and solvents, we recommend checking compatibility with the head beforehand.
Do not pour hot contents into the bottle, as the glass may crack with a sudden change of temperature. Let emulsions and oils cool to room temperature first.
The dropper is harder to clean after use than an ordinary cap. Before refilling with a different product, take it apart, rinse the glass tube several times with ethanol, wash the head separately and let everything dry.
Recycling. An empty bottle belongs in glass recycling. The dropper combines aluminium, glass, plastic and silicone, so separate it from the bottle when sorting.
Frequently asked questions
Parameters
Glass bottle, clear, 18 mm, 30 ml
Product documentation
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.



















































