+421 950 333 113info@handymade.storeActive Days: −10 % with code ACTIVE10Shop now

PLASTIC BOTTLES

Clear plastic bottle, clear pump, 200 ml

Pack size100 ml150 ml200 ml250 ml500 ml

A clear 200 ml PET bottle and a polypropylene pump make a ready-to-use set for liquid products that are dispensed by pressing: liquid soaps, shower gels, shampoos, body lotions and lighter face or body emulsions. full description

AvailabilityPre-order
Product codeO24PP200-OVD24PP
€1.14incl. VAT

Lowest price in the last 30 days: €0.75

Pre-orderThis variant is currently out of stock — your order will be a pre-order and delivery may take longer.
Volume pricing
1–2687 pcs€1.14Your price
2688–5375 pcs€1.10−3 % · 1× plato
5376–8063 pcs€1.07−6 % · 2× plato
from 8064 pcs€1.03−10 % · 3× plato

Total for 1 pcs: €1.14

Quantities add up across all combinations of this bottle.

Product description

A clear 200 ml PET bottle and a polypropylene pump make a ready-to-use set for liquid products that are dispensed by pressing: liquid soaps, shower gels, shampoos, body lotions and lighter face or body emulsions. Both parts have a 24/410 neck finish, so they fit together without any need to look for a matching closure. Plastic is lighter than glass, and the clear wall lets you see the appearance of the contents and how much product is left in the bottle. The set is declared suitable for contact with cosmetic products.


What it is suitable for

With one press, the pump dispenses approximately 1.4 ml, which corresponds to a usual portion of liquid soap for washing hands or a single application of body lotion. The dose is the same with every use, and there is no need to pour the product out through the neck.

  • Liquid soaps and shower gels – low to medium viscosity passes through the tube and the pump valve, and the product is taken with a clean hand without touching the neck.
  • Shampoos and conditioners with a lighter texture – the clear bottle lets you see the colour and clarity of the product, and the pump is easy to operate with a wet hand in the shower.
  • Body lotions and light emulsions – 200 ml is a common size for the bathroom or bedside table, and the pump limits contact of the contents with air and hands.
  • Face cleansing gels and micellar products – water-based and gel formulations are dispensed in small portions, which suits daily use.

Very thick creams, scrubs containing particles and products with a high proportion of essential oils are not suitable for this combination. A thick mass clogs the pump, particles block the valve, and the bottle should not be exposed to aggressive chemicals or concentrated solvents.


Volume and filling

Nominal volume is the amount the bottle is designed for under normal filling. The brimful volume given in the parameters is the physical volume of the bottle up to the neck and is slightly higher. The difference provides room for the tube and the pump mechanism, as well as space for the contents to expand when the temperature changes. For this reason, fill the bottle to the nominal volume, not to the brim. Otherwise, part of the product would overflow through the neck when the pump is screwed on.

The pump tube is supplied longer than the height of the bottle. Before screwing it on for the first time, trim it with a sharp knife so that it reaches just above the bottom of the bottle and does not bend. A kinked tube draws poorly, and the pump then dispenses smaller doses or only air.


Good to know

Before the first filling, wash the bottle and the pump, disinfect them with isopropyl alcohol or ethanol and let them dry completely. Residual water would dilute the first dose of the product and, in unpreserved formulations, increases the risk of microbial growth. After screwing the pump on, press it several times until the tube fills and the first dose passes through the outlet.

Clear PET does not block light. Products with light-sensitive ingredients, for example unstabilised vitamins or some plant extracts, are better filled into a dark container or stored away from direct sunlight. Keep the bottle at normal room temperature and protect it from heat and sun. Keeping it near a radiator or in a car in summer does it no good.

The set can be used repeatedly. After the contents are used up, take the bottle and the pump apart, rinse them with warm water, pump clean water through the pump several times and disinfect again before the next filling. A mixture of residues of two different products changes both the pH and the stability of the preservative system. For recycling, separate the bottle and the pump, as they are two different plastics: the bottle is PET and the pump is polypropylene.

Neither the bottle nor the pump has a certificate for contact with food. The set is intended for cosmetic and technical products and is not suitable for homemade oils, syrups or herbal infusions.

You can find a pump sold separately or another closure with a 24/410 neck finish in the Handymade range, together with other ready-made combinations. For your own assembly, we recommend verifying the seal and the dispensing with your specific formulation.


Frequently asked questions

Which products is the 200 ml plastic bottle with pump suitable for?
It is suitable for liquid and moderately thick cosmetic products that are dispensed by pressing: liquid soaps, shower gels, shampoos, body lotions and light emulsions. With one press, the pump dispenses approximately 1.4 ml. Thick creams, scrubs containing particles and products with a high proportion of essential oils are not suitable for this combination, as they clog the valve or put a strain on the PET.
Why does the pump not dispense after it is screwed on?
Most often because the tube is not yet filled or is too long and bent against the bottom of the bottle. After screwing the pump on for the first time, press it several times until it draws up the contents. If it dispenses only air, trim the tube so that it reaches just above the bottom and stands straight.
How much product actually fits into the 200 ml bottle?
The bottle is filled to the nominal volume of 200 ml, although the physical volume up to the brim is larger. The difference is a reserve for the tube and the pump mechanism and for the expansion of the contents when the temperature changes. If you filled it up to the neck, part of the product would overflow after the pump is screwed on.
Does the clear PET bottle protect the contents from light?
No, clear PET lets light through. It suits products whose ingredients do not react to light, and the advantage is that you can see the amount and appearance of the contents. Formulations with sensitive ingredients, for example unstabilised vitamins, belong in a dark container or should be stored away from the sun.
Can the plastic bottle with pump be washed and used again?
Yes, the set is intended for repeated use. Take the bottle and the pump apart, rinse them with warm water, pump clean water through the pump several times and, before the next filling, disinfect everything with isopropyl alcohol or ethanol and let it dry. Do not add new contents on top of residues of the previous product.
Is the 200 ml plastic bottle with pump suitable for food?
No, neither the bottle nor the pump has a certificate for contact with food. The set is declared suitable for contact with cosmetic products and is also suitable for technical liquids without aggressive solvents. For homemade oils, syrups or herbal infusions, choose a container approved for food.

Parameters

Plastic bottle, clear 24/410, 200 ml

Product colour
Clear
Country of origin
European Union
Nominal capacity
200
Brimful capacity
214 ml
Diameter
47 mm
Thread type
24/410
Height
146,95 mm
Product material
PETPlastic

Transparent Plastic Pump, 24/410, FBOG 200 mm

Product colour
Clear
Country of origin
China
Diameter
53 mm
Thread type
24/410
Height
45 mm
Product material
PPPlastic
Tube length
200 mm
Dose
1,4 ml

Product documentation

PPWRPackaging Declaration (PPWR)
Plastic bottle, clear 24/410, 200 ml · O24PP200PDF ↓
Transparent Plastic Pump, 24/410, FBOG 200 mm · OVD24PPPDF ↓
PDSProduct Data Sheet
Plastic bottle, clear 24/410, 200 ml · O24PP200PDF ↓
Transparent Plastic Pump, 24/410, FBOG 200 mm · OVD24PPPDF ↓
Download all (ZIP)

4 PDF files in one archive

REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.