+421 950 333 113info@handymade.storeActive Days: −10 % with code ACTIVE10Shop now

PLASTIC BOTTLES

Clear plastic bottle, clear pump, 500 ml

Pack size100 ml150 ml200 ml250 ml500 ml

Clear plastic bottle with pump, 500 ml is a set for liquid and medium-thick cosmetic products that are dispensed by pressing the pump: liquid soaps, shower gels, shampoos, conditioners, body lotions and facial cleansing… full description

AvailabilityPre-order
Product codeO24PP500-OVD24PP
€1.28incl. VAT

Lowest price in the last 30 days: €0.89

Pre-orderThis variant is currently out of stock — your order will be a pre-order and delivery may take longer.
Volume pricing
1–1319 pcs€1.28Your price
1320–2639 pcs€1.23−4 % · 1× plato
2640–5279 pcs€1.19−7 % · 2× plato
from 5280 pcs€1.13−12 % · 4× plato

Total for 1 pcs: €1.28

Quantities add up across all combinations of this bottle.

Product description

Clear plastic bottle with pump, 500 ml is a set for liquid and medium-thick cosmetic products that are dispensed by pressing the pump: liquid soaps, shower gels, shampoos, conditioners, body lotions and facial cleansing gels. The PET bottle is lightweight, and the clear walls let you see the quantity and colour of the contents. The PP pump with a 24/410 neck finish dispenses approximately 1.4 ml per press, which corresponds to a typical single dose of liquid soap or shower gel. Both components are declared as suitable for contact with cosmetic products. The set as a whole is intended for cosmetics and is not approved for contact with food.


What the set is suitable for

The 500 ml volume and pump dispensing suit mainly products that are used daily and in small doses:

  • Liquid hand soap – for the sink in the bathroom or kitchen, dispensed with one hand without unscrewing a cap.
  • Shower gels and shampoos – the clear bottle lets you see how much product is left, and the pump limits water access to the contents.
  • Body and face lotions – thinner emulsions that the pump draws up without problems.
  • Conditioners and cleansing gels – a larger pack for the home, a salon or as a supplement to smaller bottles.

Clear plastic does not protect the contents from light. Products with light-sensitive ingredients, for example with a high proportion of essential oils or unstabilised plant extracts, are better suited to dark glass or opaque packaging.


Nominal and total volume

The 500 ml figure is the nominal volume, that is, the quantity the bottle is designed to hold when filled normally. The total brim-full volume is somewhat larger, because the neck and the upper part of the bottle form a reserve for the pump dip tube and for the expansion of the contents with temperature changes. Fill the bottle to the nominal volume, not up to the neck. If it were filled to the brim, the dip tube would displace the contents and the pump would not seat on the thread.

Before first use, insert the pump dip tube into the empty bottle and check that it does not bend against the bottom when tightened. If it is too long, shorten it with a diagonal cut so that its end does not stick to the bottom and block suction.


How to use the set

Before first filling, wash the bottle and the pump, disinfect them with isopropyl alcohol or ethanol and let them dry completely. Rinse the pump by pumping clean water through it several times and then alcohol, so that the inner part of the pump is clean as well. Fill the product once it has cooled to room temperature. The PET bottle is not designed for hot filling and must be protected from heat. After fitting, tighten the pump by hand, without force, and allow for the first few presses to fill the dip tube and the pump with the product.

With emulsions and gel formulations, dispensing depends on viscosity. The pump draws up thinner products without problems, while with thicker lotions the dose becomes smaller or the pump draws in air. Check the behaviour with your specific formulation before filling a whole batch. Thick ointments and products with granular particles, for example scrubs, do not belong in the pump, as they would clog the valve.

Concentrated essential oils, undiluted fragrance compositions and solvents may damage plastic over the long term. Do not store such raw materials in the set. For formulations with a higher proportion of essential oils, test the stability of the packaging and the tightness of the pump in advance.


Good to know

The set can be used repeatedly. Once the contents are used up, wash and disinfect the bottle and the pump in the same way as before first use, and when changing the product let the packaging dry completely.

The bottle and the pump are made of different plastics, so separate them for disposal. The PET bottle belongs with plastics marked 1, the PP pump is marked 5.

The declaration of conformity and the certificate of suitability for contact with cosmetics are available for each component of the set. If you want a different closure for the bottle, closures with the same 24/410 neck finish are suitable, and you will find ready-made combinations in the Handymade range. With your own combination, check the tightness, dispensing and behaviour of the packaging with your specific formulation.


Frequently asked questions

Is the 500 ml plastic bottle with pump suitable for liquid soap?
Yes, liquid soap is one of the most common uses of this set. The pump dispenses approximately 1.4 ml per press, which corresponds to one dose for washing hands. The lightweight PET bottle suits a sink, where a glass container could fall. Fill the product once cooled and up to the nominal volume of 500 ml.
Does the clear PET bottle protect the contents from light?
No, clear plastic lets light through and does not protect the contents from it. The set is suitable for products that are not harmed by light, for example liquid soaps, shower gels or shampoos. Fill formulations with light-sensitive ingredients, for example with a high proportion of essential oils or plant extracts, into dark glass or opaque packaging.
Can the pump also dispense thick cream or body lotion?
The pump handles liquid to medium-thick products, so with thick creams test the suction in advance. It dispenses thinner body lotions without problems, while with thicker emulsions the dose becomes smaller or the pump draws in air. Thick ointments and products with granular particles do not belong in the pump, as they clog the valve.
Can the plastic bottle with pump be filled with a hot product?
No, the PET bottle is not designed for hot filling and must be protected from heat. At high temperature the bottle may deform and the pump may not seal. Let emulsions, gels and liquid soaps cool to room temperature before filling. When making a product with heat, fill it only after it has cooled completely and, where applicable, matured.
Is the bottle and pump set suitable for contact with food?
No, the set is not approved for contact with food. The bottle and the pump are declared as suitable for use with cosmetic products, not with food. Therefore use the set for cosmetic products such as liquid soaps, shower gels, shampoos or body lotions, not for edible oils, syrups or drinks.
How do I clean the plastic bottle with pump before reuse?
Wash the bottle with warm water and a cleaning product, rinse it and disinfect it with isopropyl alcohol or ethanol. Rinse the pump by pumping clean water through it several times and then alcohol, so that the inner part of the pump and the dip tube are cleaned as well. Let both parts dry completely before refilling, as water residues could dilute or contaminate the new product.

Parameters

Plastic bottle, clear 24/410, 500 ml

Product colour
Clear
Country of origin
European Union
Nominal capacity
500
Diameter
67 mm
Thread type
24/410
Height
177 mm
Product material
PETPlastic

Transparent Plastic Pump, 24/410, FBOG 200 mm

Product colour
Clear
Country of origin
China
Diameter
53 mm
Thread type
24/410
Height
45 mm
Product material
PPPlastic
Tube length
200 mm
Dose
1,4 ml

Product documentation

PPWRPackaging Declaration (PPWR)
Plastic bottle, clear 24/410, 500 ml · O24PP500PDF ↓
Transparent Plastic Pump, 24/410, FBOG 200 mm · OVD24PPPDF ↓
PDSProduct Data Sheet
Plastic bottle, clear 24/410, 500 ml · O24PP500PDF ↓
Transparent Plastic Pump, 24/410, FBOG 200 mm · OVD24PPPDF ↓
Download all (ZIP)

4 PDF files in one archive

REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.