PLASTIC BOTTLES
Clear plastic bottle, clear pump, 150 ml
Pack size100 ml150 ml200 ml250 ml500 ml
A clear PET bottle with a volume of 150 ml and a fitted pump with a 24/410 neck finish forms a ready-made packaging set for liquid and semi-liquid cosmetic products that are dispensed by pressing. full description
Lowest price in the last 30 days: €0.75
Total for 1 pcs: €1.28
Quantities add up across all combinations of this bottle.
Product description
A clear PET bottle with a volume of 150 ml and a fitted pump with a 24/410 neck finish forms a ready-made packaging set for liquid and semi-liquid cosmetic products that are dispensed by pressing. The bottle is light and does not break when dropped, and the clear material lets you see the amount and colour of the contents. The pump dispenses the same portion with every press, so the product does not spill and the neck stays clean. The bottle and the pump are both declared suitable for contact with cosmetics.
Suitable for products such as
- Body lotions and lighter creams – emulsions with a more fluid consistency pass through the pump easily, and the measured dose is enough for one use.
- Liquid soaps, shower gels and shampoos – surfactant-based products with low to medium viscosity are among the most common uses of bottles with a pump.
- Cleansing gels and facial cleansing milks – a dose of approximately 1.4 ml corresponds to the usual amount for one wash.
- Conditioners and massage emulsions – as long as they are not too thick, dispensing is more hygienic than scooping from a jar.
How to work with the set
Before the first filling, the bottle and the pump are washed, disinfected with isopropyl alcohol or ethanol and left to dry completely. The dip tube of the pump is longer than the bottle, so it is trimmed before fitting so that it reaches just above the bottom. After the pump is screwed on, a few presses draw the contents into the head, and only then does it dispense evenly.
Fill up to the nominal volume, not to the brim. The nominal volume is the amount the bottle is designed for in normal filling. The brimful capacity listed in the parameters is the physical volume up to the neck. The difference provides room for the dip tube of the pump and for the expansion of the contents when the temperature changes.
The pump works best with products of low to medium viscosity. A thick cream is drawn through it with difficulty or not at all, while a very thin liquid, for example a toner, drips from the head. Before filling a whole batch, we recommend testing the dispensing on one bottle.
Good to know
Clear plastic does not protect the contents from light. Products with sensitive active ingredients, vegetable oils prone to oxidation or natural dyes last longer in dark packaging or in a box. For finished products that stand on a shelf in the bathroom, this is usually not a problem.
PET is not suitable for hot filling; emulsions and gels are left to cool to room temperature before filling. For formulations with a higher proportion of essential oils, alcohol or solvents, we recommend first checking compatibility with the plastic on a sample.
The internal mechanism of the pump cannot be taken apart and cleaned perfectly. If you reuse it, rinse it by pumping warm water through it several times, disinfect it with alcohol and let it dry. For products of different composition, it is safer to use a new pump.
The bottle is made of PET and the pump of PP. Before the set is handed over for recycling, the two parts are separated. The bottle itself has a 24/410 neck, and other closures with the same type of thread from the Handymade range also fit it. If you use your own combination, we recommend checking the tightness and dispensing with the specific formulation.
Frequently asked questions
Parameters
Plastic bottle, clear 24/410, 150 ml
Transparent Plastic Pump, 24/410, FBOG 200 mm
Product documentation
- PPWRPackaging Declaration (PPWR)
- PDF ↓
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.



























































