The glass bottle is also suitable for formulations that contain essential oils or aromatic blends, provided their concentration is adjusted to cosmetic use and to the formula itself. Glass is generally resistant to most essential oils and does not degrade as quickly as many plastic materials. When working with higher concentrations of essential oils, we always recommend testing the stability of the product and the functionality of the spray pump on a small trial batch in order to verify the consistency of the spray, the sealing, and the long-term behaviour of the blend in contact with the packaging.

The bottle can be used repeatedly if proper hygiene principles are observed. Before each new filling, the packaging must be thoroughly cleaned, rinsed and then disinfected with a suitable alcohol, for example using isopropyl alcohol IPA 99 % isopropyl alcohol or plant ethanol Ethanol 96 % denatured plant-based. Disinfection helps minimise the risk of microbial contamination and the influence of the new formulation by residues of the previous product. When changing the type of product (for example from a disinfectant solution to a facial toner), we recommend paying increased attention to cleaning and rinsing the spray pump so that the fragrance and effect of the new preparation are not affected.

When filling, we recommend using a funnel or a suitable dosing aid to prevent contamination of the neck and thread. Do not fill the bottle right up to the top, but leave a small free space that will allow the proper function of the spray mechanism and circulation of air when pressing the pump. After filling, carefully wipe the neck and thread, screw on the spray pump and check the sealing by gently turning the packaging upside down. Before first use, it is common that it is necessary to press several times until the system “primes” and starts to produce an even mist. Thicker emulsions or very viscous products may require an individual test to determine whether they are suitable for this type of spray pump.

After the product has been used up, we recommend thoroughly rinsing out the remaining contents, then disassembling the packaging (separating the spray pump from the glass part) and washing it with warm water and a suitable cleaning agent. After thorough rinsing, let the glass and the spray pump drain and dry. Before refilling, the packaging must be disinfected – for example by rinsing or spraying the inner surface of the glass and all parts that come into contact with the product, using an alcohol such as IPA 99 % isopropyl alcohol or Ethanol 96 % denatured plant-based. After disinfection, allow the alcohol to evaporate at room temperature and only then refill the packaging, so that the new formulation is not diluted or affected.

If you decide not to reuse the packaging, we recommend recycling it in accordance with local waste-sorting rules and the information provided in the parameter table for the product on the Handymade website. The glass part can generally be placed in the glass container after removing product residues and plastic components. The spray pump, which consists of multiple materials (plastic, metal spring, etc.), should be separated from the glass and sorted according to the recommendations in the recycling section for the specific product. Before handing it over for collection, always empty and rinse the packaging as much as possible in order to minimise cosmetic residues in the waste stream.

The simplest way to find suitable packaging for your product is to use the advanced filter in the relevant packaging category. After clicking on the category, the advanced filter is located at the top of the page and allows you to quickly narrow down the selection according to several parameters. You can filter by neck type, overall size and volume, colour and packaging material. Thanks to this, you can easily match bottles, dropper bottles, jars, as well as closures and dispensers so that they meet your specific formulation and the visual identity of your brand.