COSMETIC CLAYS
Yellow Illite Cosmetic Clay, 500 g
Yellow cosmetic clay is a mineral blend of illite and kaolin that binds sebum and impurities and mattifies the skin. It is used mainly in face masks for oily, combination and acne-prone skin. full description
Lowest price in the last 30 days: €10.38
Product description
Yellow cosmetic clay is a mineral blend of illite and kaolin that binds sebum and impurities and mattifies the skin. It is used mainly in face masks for oily, combination and acne-prone skin. It can be mixed with water and applied on its own, or added in a smaller amount to soap, cleansing products or hair care.
The clay is processed only mechanically, by drying and grinding, without any chemical treatment. It contains no quartz and is odourless.
How it works on the skin
The effect of the clay rests on its absorbency. The particles bind sebum and absorb odours from the skin surface, and carry them away when rinsed off. After the mask, the skin looks more matte and cleaner, and the pores are less visible.
The same property also has its limit. Clay that binds sebum can dry out the skin.
For dry skin, leave the mask on for a shorter time.
Key properties
- Binds sebum – absorbs excess sebum and mattifies the skin; suitable for oily, combination, acne-prone and problem skin.
- Mild exfoliation – 90% of the particles are smaller than 35 µm; when rinsed off, the clay helps remove dead skin cells.
- Odour absorption – used in body and scalp products.
- Opacifying and colour – gives a water-based formula, gel or soap opacity and a yellow tint.
- Consistency adjustment – swells in water and acts as a rheology modifier in the product.
- Mineral origin – comes from France, is vegan and is approved for natural cosmetics (COSMOS Approved, NATRUE Approved).
Use in formulations
Yellow clay does not dissolve in water, oil or alcohol. In water it disperses, meaning it spreads through the water. It is added to the water phase or afterwards to the finished mixture, at a temperature below 80 °C. It is suitable for both rinse-off and leave-on products.
The usage rate depends on the role the clay is to play in the product. The recommended range is 5–100%, where the upper limit means pure clay mixed with water as a mask. In other formulations, 0.3–10% is used. In a hair conditioner it is around 0.3%, in a facial cleansing gel bar around 0.6%. At such a low rate, the clay serves as a colouring agent and an absorbent.
Expect lumps when mixing. Kaolin particles clump together and form a three-dimensional network in the formulation, and the clay also swells in water. Therefore, mix the powder thoroughly until the mixture is smooth.
The clay itself is alkaline, with a pH of 8–9. A pH of 6–8 suits the finished product. In more acidic formulations the clay raises the pH, so we recommend measuring it after the clay has been incorporated.
In formulations it is combined with glycerine, butters and vegetable oils. In hair conditioners it is also combined with fatty alcohols and a cationic emulsifier.
Suitable for products such as
- face masks for oily, combination and acne-prone skin, both powder and ready-made paste masks
- body and scalp masks
- soaps, where the clay colours the soap and acts as a mild abrasive when washing
- facial cleansing products, including gel bars
- hair conditioners and masks
- colour cosmetics, where it mattifies and adds colour
Good to know
The clay is a natural raw material with a microbial count of up to 1000 CFU/g. A mask mixed from the powder and water is intended for immediate use.
Preserve every product containing clay and water that is meant to last longer.
Frequently asked questions
Parameters
- INCI
- Illite, Kaolin
- CAS No.
- 12173-60-3, 1332-58-7
- EC number
- 601-803-4, 310-194-1
- Product colour
- Yellow
- Country of origin
- France
- Grade
- Cosmetic grade
- Odour
- Odourless
- Appearance
- Powder
- Formulation phase
- Water phasePost-addition
- Function in formulation
- OpacifierAbrasive agentRheology modifierOdour absorption
- Recommended processing temperature
- < 80 °C
- Recommended usage rate
- 5 – 100 %
- Recommended formulation pH range
- 6 – 8
- Biodegradability
- Not applicable
- Certifications
- Vegan
- Manufacturer's certificate
- COSMOS ApprovedNATRUE Approved
- Natural Index (NI ISO 16128)
- 1,00
- Natural Origin Index (NOI ISO 16128)
- 1,00
Product documentation
Learn how to work with it
From our blogVerified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.
























