Follow the discounted products!
Nakúp ešte za 23,50€a dopravu máš zadarmo
Would you like to create account?
Do you want to make your own blush by hand? You may already have experimented with making blush, but if you want to create a product with a beautiful pink colour, yet without unnecessary sheen and sparkle that mica powders would otherwise bring, you are in the right place. We bring you instructions for making a blush containing pink ultramarine.
To make a homemade blush you will need a blend of oils and waxes and of course a pigment. Shiny mica powders have in this case been replaced with pink ultramarine to achieve the most natural possible appearance of the final product on the skin. Try making it yourself – it is really simple as the product contains only an oil phase!
We bring you a few tips and tricks on how to make the production of blush easier. Thanks to them, you will avoid the most common problems that may arise when making homemade blush.
The most important element in making blush is the thorough dispersion of the ultramarine. Stirring can take 5 or even 10 minutes. If any undispersed ultramarine remains in the product, lumps of this raw material will sink to the bottom of the jar and when applying such a product you will observe dark pink streaks of undispersed ultramarine on the skin.
A silicone spatula is ideal for dispersing. Use a standard kitchen spatula or you can reach for smaller spatulas intended for applying face masks. Do not skip this step, because the final blush will not have a uniform colour.
In this case, add tocopheryl acetate and the fragrance oil still to the hot product. If you waited until the temperature dropped below 40 °C, it could happen that the product would begin to set before you thoroughly stir vitamin E and the fragrance oil into the product.
As packaging it is appropriate to choose smaller jars with a volume of 2–10 ml, as even a small amount of blush will last you for quite a long time.
Below we will introduce the individual raw materials and their role in the recipe for making homemade blush. You will also find out more about possible substitutions or variations, thanks to which you can tailor the product to your needs.
A favourite oil for making homemade decorative cosmetics is castor oil. This oil has a relatively high viscosity and a neutral colour, therefore it is not only easy to apply, but also does not disturb the colour effect of products. For these reasons it is hard to replace it with another vegetable oil. If you must do so, reach rather for colourless oils such as fractionated coconut oil or MCT caprylis. However, these oils are less viscous, and that will affect the final consistency of the product.
Coconut oil is another popular raw material in homemade cosmetics, since it melts upon contact with the skin and thus facilitates the application of many products. You can choose either the refined or unrefined version of this oil.
Because coconut oil melts already on contact with the skin, it is quite difficult to replace it with another oil while maintaining the same consistency of the product. If you replace coconut oil with another vegetable oil, it will probably be necessary to slightly increase the wax content in order to achieve the same consistency.
To thicken and provide firmness to the product, beeswax was chosen. Without wax, the product would be too fluid for easy application and would adhere less well to the skin. That is why beeswax is an important raw material in the product. By increasing its content you will achieve a firmer blush and conversely, by reducing the wax content in the recipe you will obtain a softer product with a creamier texture and consistency.
White beeswax is deodorised, and thus does not disrupt the product with its scent. At the same time it is colourless, and therefore will not affect the pigments in the recipe. On the other hand, it can be replaced by its unrefined natural version. A vegan alternative is almond wax, but here there is a risk of a slight change in consistency.
Rice starch is a raw material specially created for use in cosmetics, which in this recipe has two roles. It is a matte white powder whose task is to create a uniform colour base for the addition of ultramarine and to achieve colouring of the resulting blush mixture. Its second role is to improve the longevity of the make-up (it improves the adhesion of the product to the skin) and to slightly thicken the consistency of the mixture. We recommend that you do not omit this raw material, as this would lead to a change in both the consistency and the colour of the final product on the skin.
An alternative to shimmering mica powders is ultramarines. These pigments are not available in as wide a range of colours as mica powders, but pink ultramarine is excellent for making blushes. Its advantage over mica powders lies in the fact that it is not shimmery, and so you obtain a product without this effect on the skin.
At the same time, mica powders represent an alternative to ultramarine; they are available in a wide range of shades and you can certainly use them if you do not mind a slightly shimmery effect on the skin. To obtain a blush in a red shade without a shimmery effect, try red iron oxide.
Besides the type of pigment, you can also play with its proportion or combine several pigments in order to achieve the colour shade you desire.
Vitamin E, or tocopheryl acetate, is a great option to extend the freshness of oils and fats in the recipe and to slow down the process of their oxidation. It is an active ingredient that is not indispensable in the recipe, but it helps to delay pronounced oxidation of the product. You will recognise that your oils have oxidised by a change in smell, and possibly also in the consistency and colour of the product. The product will have an unpleasant odour and may be slightly sticky to the touch. Throw such a product away and make a new one.
Do not substitute tocopheryl acetate with tocopherol, since we must add vitamin E to a product that is still relatively hot; tocopherol would significantly degrade under the influence of the temperature.
Do you also like products with a pleasant scent? That is also why we could not resist adding fragrance oil to the recipe for homemade blush. However, simply omit the fragrance oil and replace it with castor oil if you want an unperfumed product.
An alternative to fragrance oils is also represented by essential oils. However, always follow the recommended dosage for the specific type of product, as stated for example in IFRA standards for the individual oils. Avoid citrus essential oils, which could increase skin sensitivity after exposure to sunlight.
As mentioned, you can experiment with homemade formulations to achieve the desired properties. However, the final result can be influenced by many factors, such as humidity, temperature, quality of raw materials or their storage.
Before you use any raw material to make a cosmetic product, familiarise yourself with its properties, recommended dosage, storage conditions and safe handling. Each raw material may have the potential to trigger an allergic reaction in sensitive individuals, therefore before using the product we recommend establishing whether you are not allergic to any of the raw materials or to the overall product, e.g. by means of a patch test.
If you have very sensitive or very acne-prone skin, or you have other skin or health problems, we recommend consulting a medical professional before applying a new product to the skin, whether it is a homemade cosmetic product, a pure raw material or a commercially available product.
