+421 950 333 113info@handymade.storeHandymade Days: −10 % on all ready-made productsShop now

MICA POWDERS

MICA Pigment Powder, Coppery Blush, 500 g

Pack size10 g50 g200 g500 g

Mica Coppery Blush is a pearlescent pigment in a copper-red shade that gives decorative cosmetics both colour and a satin sheen from a single raw material. full description

AvailabilityPre-order
Product codeFM850_500
€69.99incl. VAT€139.98/kg

Lowest price in the last 30 days: €69.99

Pre-orderThis variant is currently out of stock — your order will be a pre-order and delivery may take longer.

Product description

Mica Coppery Blush is a pearlescent pigment in a copper-red shade that gives decorative cosmetics both colour and a satin sheen from a single raw material. It is based on mica of mineral origin, surface-treated with red iron oxide.

It is used in eye shadows, blushes, highlighters and products for the lips and nails. It is intended for leave-on decorative cosmetics for the face, eye area, body, lips and nails.


What effect it creates

The sheen of pearlescent pigments is created on flat mica platelets that reflect light. Its character is determined by particle size. This pigment has particles with an average size of 5–25 µm, which is a fine fraction. On the skin it creates a continuous satin sheen without coarse sparkles.

The colour comes from red iron oxide. The shade is copper with a red undertone, and its intensity increases with the usage rate. In a small amount the pigment warmly tints and brightens the product, while in a high amount it gives full colour.


Key properties

  • Mineral origin – mica and red iron oxide, with no materials of animal origin.
  • Fragrance-free – a dry powder that does not change the scent of the finished product.
  • Dye purity – meets the requirements of Annex IV of Regulation (EC) No 1223/2009, including limits for heavy metals and microbial purity.
  • Heat resistance – the pigment is chemically stable and heat-resistant up to 800 °C.
  • No nanomaterials or microplastics – it contains no nanomaterials or intentionally added microplastics.
  • For all skin types – the raw material is not classified as hazardous under the CLP Regulation.

Use in formulations

The pigment does not dissolve in oil or in water; in both it is only dispersed. It is added to the oil phase or afterwards to the finished product, and it is processed at a temperature below 80 °C.

The usage rate is 1–50% and depends on the required intensity. Lower rates are sufficient for tinting and brightening creams, balms and body oils. Higher rates belong in decorative cosmetics, especially in loose and pressed powders and eye shadows, where the pigment makes up a substantial part of the formulation.

The suitable pH of the formulation is 6–9.

The pigment binds 50–65 g of oil per 100 g of powder. At high rates in pressed powders and sticks, the product may turn out drier; in that case, add a binder or oil.


Suitable for products such as

  • Eye shadows – both loose and pressed.
  • Blushes, bronzers and highlighters – in powder, cream and stick form.
  • Lipsticks, lip glosses and tinted lip balms – colour and sheen in an oil and wax base.
  • Body oils, butters and creams with shimmer – low rates for a copper glow on the skin.
  • Nail products – as a colour and pearlescent component.

Good to know

In thin bases, for example in body oil, the insoluble pigment settles to the bottom over time. Simply shake the product before use.

The resulting shade depends on both the base and the usage rate. In a clear oil or gloss it looks different than in a white creamy base, which lightens the colour. We therefore recommend preparing a small test batch and adjusting the intensity gradually.

When working with the powder, do not inhale the dust. Use a dust mask and eye protection, and wash your hands before and after work.


Frequently asked questions

Is mica Coppery Blush soluble in water or oil?
No, mica Coppery Blush does not dissolve in water or in oil; in both it is only dispersed. The pigment particles remain dispersed in the product, and it is these particles that create the colour and sheen. The pigment is added to the formulation in the oil phase or afterwards to the finished product.
What is the usage rate of Coppery Blush pigment?
The recommended usage rate of Coppery Blush pigment is 1–50%, depending on the required colour intensity. Low rates are sufficient for tinting and brightening creams, balms and body oils. High rates are used in decorative cosmetics, for example in loose and pressed eye shadows and powders, where the pigment makes up a large part of the formulation.
Can mica Coppery Blush be used on the lips and in eye shadows?
Yes, mica Coppery Blush is also intended for the lips and the eye area, as well as for the face, body and nails. It contains mica and red iron oxide and meets the dye purity criteria under Annex IV of Regulation (EC) No 1223/2009, including limits for heavy metals. It is used in leave-on decorative cosmetics.
How is mica Coppery Blush added to a balm or lipstick?
Mica Coppery Blush is added to a balm or lipstick in the oil phase, that is, into the melted mixture of oils, butters and waxes, at a temperature below 80 °C. The other option is to incorporate it into the finished product afterwards. With a high pigment content in sticks, keep in mind that the powder binds 50–65 g of oil per 100 g. The product may turn out drier, and in that case oil or a binder needs to be added.
Does mica Coppery Blush give a glittery or a satin effect?
Mica Coppery Blush gives a satin sheen without coarse sparkles. This is determined by the particle size, which averages 5–25 µm. Such fine mica platelets reflect light evenly and create a continuous smooth sheen on the skin. The shade is copper with a red undertone.

Parameters

INCI
Mica, Iron Oxide Red
CAS No.
12001-26-2, 1309-37-1
EC number
310-127-6, 215-168-2
Product colour
RedBrown
CI number
CI 77019, CI 7749177019, 77491
Country of origin
Spain
Processing method
Surface treatment
Appearance
Powder
Formulation phase
Oil phasePost-addition
Function in formulation
Colorant
Recommended processing temperature
< 80 °C
Recommended usage rate
1 – 50 %
Recommended formulation pH range
6,00 – 9,00
Application type
Leave-on
Suitable for
All skin types
Biodegradability
Not applicable
Natural Index (NI ISO 16128)
0,00
Natural Origin Index (NOI ISO 16128)
1,00
Organic content
0 %
Renewable Carbon Content (RCC)
0 %

Product documentation

CoACertificate of Analysis
batch 170231PDF ↓
TDSTechnical Data Sheet
Physical parameters and processingPDF ↓
SDSSafety Data Sheet
Available for purchased products —
Download all (ZIP)

2 PDF files in one archive

Learn how to work with it

From our blog
REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.