PLASTIC BOTTLES
Amber Plastic Bottle, Black Disc Top, 150 ml
Pack size100 ml150 ml200 ml300 ml
Amber PET bottle with a 24/410 neck finish and a black disc top cap for 150 ml of liquid and semi-liquid preparations. full description
Lowest price in the last 30 days: €0.97
Total for 1 pcs: €0.97
Quantities add up across all combinations of this bottle.
Product description
Amber PET bottle with a 24/410 neck finish and a black disc top cap for 150 ml of liquid and semi-liquid preparations. The amber tint of the plastic dampens light, so the set suits contents that are damaged by direct light: body oils, lotions with plant extracts or facial toners with active ingredients. PET is lightweight and does not break when dropped, which you will appreciate for products used in the shower, in the bathroom or when travelling. The disc top cap opens and dispenses with one hand, without unscrewing.
The set is declared suitable for contact with cosmetic products. Neither the bottle nor the cap has a food-contact certificate, so it is intended exclusively for cosmetics.
What the set is suitable for
The 150 ml volume corresponds to a common pack size for everyday products that are used up within a few weeks.
- Rinse-off products – shampoos, conditioners, shower gels and liquid soaps. The disc top can be opened even with a wet hand and the bottle withstands a humid environment.
- Body lotions and lighter emulsions – thinner preparations that can be squeezed or poured out without getting stuck in the opening.
- Massage and body oils – the amber plastic protects light-sensitive oils, and dispensing through the disc top limits spills.
- Facial and hair waters – toners, hair rinses and micellar waters poured onto the palm or a cotton pad.
The disc top is not suitable for thick creams, butters and balms. The opening is small and a solid mass is difficult to dispense through it. Jars or other wide-neck packaging are more suitable for such products.
How it dispenses and seals
The disc top cap has a flip lid with an opening on top. Pressing one side lifts the lid and exposes the opening. The contents are dispensed by tilting the bottle or squeezing it slightly. Pressing the lid back down closes the opening and stops the flow. The whole cap is screwed onto the bottle thread and, for refilling or cleaning, it is unscrewed like an ordinary cap.
A closed disc top protects the contents from spilling during normal use and storage. When transporting the bottle in a bag or luggage, store it upright or place it in a pouch. Under prolonged pressure on the bottle walls, a small amount of liquid contents may escape through the opening.
For very liquid contents, such as water-based toners, test the dispensing on one bottle before you fill the whole batch. This lets you check that the stream is not too strong and that the lid seals as you need once closed.
Volume and filling
The nominal volume of 150 ml is the amount the bottle is designed for under normal filling. The brimful capacity stated in the parameters is the physical volume of the bottle up to the neck and is higher. The difference is a reserve that remains free for the cap and for the expansion of the contents with temperature changes. The bottle is therefore filled to the nominal volume. If it were filled to the neck, the contents would leak through the disc top opening once the cap is screwed on.
Good to know
Before the first filling, wash the bottle and the cap, disinfect them with isopropyl alcohol or ethanol and leave them to dry completely. Residual water in the packaging dilutes the finished product and its preservative system.
The bottle is intended for storage at 5–30 °C and should be protected from heat. Warm emulsions and oils should therefore be left to cool to room temperature before filling. The bottle should also not be exposed to aggressive chemicals. For formulations with a high proportion of essential oils, alcohol or solvents, first test how the packaging behaves on one bottle with your specific recipe.
The set can be used repeatedly. After the contents are used up, wash, disinfect and dry the bottle and the cap in the same way as before the first filling. Also check the flip lid. If the hinge has loosened or the lid has stopped sealing, replace the cap with a new one.
Closures with the same 24/410 neck finish and ready-made bottle and closure combinations can be found in the Handymade range. When making your own combination, always check the seal and dispensing with your specific formulation.
The bottle is made of PET and the cap of PP. Both materials belong in sorted plastic waste. Separate them before disposal and rinse the bottle.
The set is not approved for food contact. Do not use it for homemade oils, syrups, herbal infusions or other foods, even if the contents are intended only for your own household.
Frequently asked questions
Parameters
Brown plastic bottle, 24/410, 150 ml
- Product colour
- Brown
- Country of origin
- European Union
- Nominal capacity
- 150
- Brimful capacity
- 170 ml
- Diameter
- 49 mm
- Thread type
- 24/410
- Height
- 118 mm
Plastic cap, 24/410, disc top, black
Product documentation
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.


































































