PLASTIC BOTTLES
Recycled Plastic Bottle, Transparent Plastic Pump, 250 ml
The 250 ml recycled PET plastic bottle with a clear pump and a 24/410 neck finish is a ready-to-use set for liquid and medium-thick cosmetic products that are dispensed by pressing: liquid hand soaps, shower gels,… full description
Lowest price in the last 30 days: €1.19
Total for 1 pcs: €1.60
Quantities add up across all combinations of this bottle.
Product description
The 250 ml recycled PET plastic bottle with a clear pump and a 24/410 neck finish is a ready-to-use set for liquid and medium-thick cosmetic products that are dispensed by pressing: liquid hand soaps, shower gels, shampoos, body lotions, make-up removing oils and massage oils. The bottle is lightweight and unbreakable, and through the clear wall you can see the colour of the product and how much remains. Each press of the pump dispenses approximately the same amount, the contents are not poured out or scooped with your fingers, and the product stays clean during use.
Both parts are declared suitable for contact with cosmetic products, and the set is intended for cosmetics and simple technical preparations. The declaration of conformity is available with the product.
What it is suitable for
- Liquid soaps and shower gels – at the sink or in the shower, they are dispensed with one hand, without unscrewing a cap.
- Shampoos and liquid conditioners – the pump handles the usual consistency of a shampoo; with thicker conditioners, we recommend testing whether the contents are drawn up.
- Body lotions and lighter creams – liquid and semi-liquid emulsions pass smoothly through the dip tube, whereas a thick cream with a firm consistency does not.
- Make-up removing oils and massage oils – the clear material shows the clarity of the oil, and the low viscosity suits the pump.
- Facial waters and toners – when applying to a cotton pad or into the palm, the pump dispenses more precisely than pouring from the neck.
- Preparations for a salon or workshop – the set is also of technical grade and is suitable for your own cleaning or treatment preparations that are not aggressive towards plastic.
How the pump works
The pump is screwed directly onto the neck of the bottle and draws up the contents through a dip tube that reaches the bottom. One press dispenses approximately 1.4 ml. With liquid soap this is the amount for one hand wash; with a thicker emulsion it is slightly less, because the pump works against the resistance of the contents. After filling and fitting, press the pump several times until the dip tube and head fill and the product starts to come out.
The clear pump matches the bottle in colour, and through the dip tube and head you can see whether there are still contents or air in the system.
The dip tube is supplied longer than the height of the bottle. Before first fitting, shorten it with an angled cut so that it ends just above the bottom. The angled cut prevents the dip tube from sticking to the bottom and no longer drawing up the contents.
Volume and filling
The nominal volume of 250 ml is the amount the bottle is designed for with normal filling. The physical volume up to the neck is larger. The difference provides a reserve for the dip tube and the lower part of the pump, which take up part of the space once fitted, and for the expansion of the contents when the temperature changes. For this reason, fill only up to the nominal volume. If filled up to the neck, part of the product would be pushed out when the pump is screwed on and would contaminate the thread.
Good to know
Before first filling, wash the bottle and the pump, disinfect them with isopropyl alcohol or ethanol, and leave them to dry completely. It is enough to pump clean water through the pump several times and then a disinfecting solution, so that the dip tube and the valve are rinsed as well.
The set is intended for repeated use. When refilling with the same product, thorough washing is sufficient. When changing the formulation, we recommend taking the pump apart as far as it allows and pumping warm water through it until clean water comes out.
Clear PET does not protect the contents from light. Products with light-sensitive ingredients, for example with a high proportion of vegetable oils or vitamins, are better kept in dark packaging; alternatively, store the clear bottle out of direct sunlight.
Do not expose the bottle or the pump to aggressive chemicals. Usual cosmetic concentrations of fragrance ingredients are fine. With undiluted essential oils, a higher proportion of alcohol or unusual ingredients, we recommend leaving a sample in the packaging for several weeks and observing the wall of the bottle and the behaviour of the pump.
Other closures with the same type of neck also fit the 24/410 neck finish. You can find ready-made combinations of the bottle with a closure in the Handymade range. If you use your own combination, we recommend checking the tightness, dispensing and behaviour of the packaging with your specific formulation.
The bottle is made of PET and the pump of PP. Before disposal, separate and empty both parts; both materials belong in plastic recycling.
Frequently asked questions
Parameters
Plastic bottle, recycled, clear 24/410, 250 ml
- Product colour
- Clear
- Country of origin
- European Union
- Nominal capacity
- 250
- Diameter
- 49 mm
- Thread type
- 24/410
- Height
- 167 mm
Transparent Plastic Pump, 24/410, FBOG 200 mm
Product documentation
- DrawingTechnical drawing
- PDF ↓
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.




























































