Yes, the bottle with spray pump is suitable for beginners as well. Thanks to practical dosing and durable glass, it is easy to work with for small and test batches. You only need to choose a suitable volume according to your needs and take care of proper cleaning and disinfection of the packaging before the first filling and between individual used batches.

The packaging can be reused if hygiene principles are followed. Before each filling we recommend mechanically cleaning the bottle and spray pump, rinsing thoroughly and then disinfecting with a suitable alcohol‑based disinfectant, for example isopropyl alcohol IPA 99 % or plant‑based ethanol Ethanol 96 % denatured. After disinfection, allow all parts to dry completely so that no residual moisture enters the product.

The spray pump is ideal for liquid formulations with low to medium viscosity, such as toners, hydrolats, light water‑based serums or alcohol sprays. With thicker emulsions or oil blends, the dispersion may be less even, so we recommend making a trial filling and verifying that the selected product type passes through the spray pump smoothly and without clogging.

We recommend storing the filled medicine bottle upright, in a dry place and at a stable room temperature, away from direct sunlight and sources of heat. This reduces the risk of changes in consistency, evaporation of volatile components and possible damage to the spraying mechanism. When storing, always check that the closure is properly tightened to prevent leakage of the contents, especially during transport or when carrying it in a bag.

If you decide not to reuse the packaging, we recommend recycling it according to the material types stated in the product parameters. The glass body of the bottle, once emptied and basically rinsed, is normally placed in the container designated for glass. The spray pump and any plastic or metal parts should be separated and placed in the appropriate sorted waste collection according to local rules (usually plastic or metal). When handling packaging that has contained a cosmetic product, extreme cleaning is not necessary – normal rinsing is sufficient so that distinct product residues do not interfere with recycling.

When choosing packaging, we recommend using the advanced filter in the packaging material categories. After clicking on the relevant category at the top of the page, you will find the option to filter according to important parameters – specifically by neck type, size, colour and material. This allows you to tailor the selection of bottles, medicine bottles, jars and dispensers exactly to your product’s needs and easily find compatible combinations of packaging and closure.