GLASS BOTTLES up to 10 ml
White Glass Bottle, Black Safety Cap & Dropper 10 ml
Pack size10 ml15 ml30 ml100 ml
A kit for dispensing cosmetics by the drop: a white glass medicine bottle, 10 ml , a plastic dropper insert fitted into the neck and a black ribbed tamper-evident cap. full description
Lowest price in the last 30 days: €1.35
Total for 1 pcs: €1.35
Quantities add up across all combinations of this bottle.
Product description
A kit for dispensing cosmetics by the drop: a white glass medicine bottle, 10 ml, a plastic dropper insert fitted into the neck and a black ribbed tamper-evident cap. The contents are dispensed by tilting the bottle, with no additional tools and no measuring. It is suitable for essential oils and their blends, oil-based face serums, nail and cuticle oils, or small samples for testing. White glass is opaque, so the level and colour of the contents cannot be seen from outside, and it lets less light through to the contents than a clear bottle.
All three components of the kit are declared suitable for contact with cosmetic products; the declaration of conformity and technical documentation are provided with the individual components. The kit is intended for cosmetics and has no certificate for food contact.
How the kit works
The dropper insert is pressed into the neck of the bottle and stays in it permanently. It is supplied in a long version for glass medicine bottles with an 18 mm neck. Once fitted, the bottle is closed with an 18/410 threaded cap, which fits the thread of the medicine bottle. To dispense, simply tilt or invert the bottle and the contents flow out drop by drop. The size of the drop and the dripping speed depend on the viscosity of the contents. Thin essential oils drip quickly, thicker vegetable oils more slowly. For serums that require precise dispensing, we therefore recommend testing the first drops and stating the number of drops per use in the instructions.
The ribbed surface of the cap is easy to grip even with oily fingers. The tamper-evident ring on the cap separates when the cap is first unscrewed, so the customer can see straight away whether the bottle has already been opened. When selling finished products, it replaces shrink film or a sealing label.
Nominal and total volume
The nominal volume of 10 ml is the amount the bottle is designed for in normal filling. The total brimful volume is the physical volume up to the neck, and you will find it in the parameters. The difference between the two values is a reserve for the dropper insert, which takes up part of the neck when fitted, and for the expansion of the contents when the temperature changes. Fill up to the nominal volume. A bottle filled to the brim will overflow when the dropper insert is pressed in, and the contents will get onto the thread, where they dry and make the cap stick.
What it is suitable for
- Essential oils and fragrance blends – dispensing by the drop into a diffuser, massage oil or bath, with white glass limiting the access of light.
- Oil-based serums for the face and eye area – the small volume matches the daily use of a few drops, and the contents are used up quickly.
- Nail and cuticle oil – one drop per nail, with no brush and no contamination of the neck.
- Eyebrow and eyelash serum – dispensing a small amount onto an applicator or a finger.
- Samples and testers – 10 ml is enough to try out a blend before making a larger batch, and the tamper-evident ring on the cap shows that the sample has not been opened.
Good to know
Before the first filling, wash the bottle, disinfect it with isopropyl alcohol or ethanol and let it dry completely. Residual water in oil-based contents encourages the growth of microorganisms, and glass can be disinfected without concern. The dropper insert and the cap are cleaned in the same way; with plastic parts, allow the ethanol to evaporate completely.
Fill the bottle before fitting the dropper insert, using a syringe or a narrow funnel, up to the nominal volume. Then press the dropper insert into the neck and finally screw on the cap. The reverse order does not work, as filling through a fitted dropper insert is very slow.
The glass medicine bottle can be reused; simply wash it and disinfect it again. The dropper insert is difficult to remove and oil residues cannot be reliably washed out of its narrow channel, so when changing the contents we recommend a new dropper insert. After the tamper-evident ring is broken, the cap still seals, but it no longer serves as a tamper indicator.
The dropper insert is made of polypropylene and the cap of polyethylene. With concentrated essential oils, especially citrus ones, and with alcohol-based or solvent-based contents, we recommend testing how the plastic parts behave with your specific formulation, and whether the seal holds during transport, before producing a larger series.
Ready-made combinations of medicine bottles with other closures, as well as closures sold separately with an 18/410 neck finish, can be found in the Handymade range. At the end of its life, the glass goes into glass recycling, while the dropper insert and the cap are separated before disposal and sorted as plastic.
Frequently asked questions
Parameters
Glass bottle, vial, white, 10 ml
Plastic dropper for glass vials, 18 mm, long
Black Tamper Evident Safety Cap, Ribbed 18/410
Product documentation
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.















































































