+421 950 333 113info@handymade.storeHandymade Days: −10 % on all ready-made productsShop now

SOAP BASES 1 kg

ZENISOAPBASE Melt & Pour, MAXI Aloe Vera Clear, 1 kg

ZENISOAPBASE MAXI Aloe Vera Clear soap base is a ready-made clear soap base of European origin containing aloe vera leaf juice. Soap is made from it by melting it and pouring it into a mould. full description

AvailabilityPre-order
Product codeMH116_1
€8.06incl. VAT€8.06/kg

Lowest price in the last 30 days: €7.25

Pre-orderThis variant is currently out of stock — your order will be a pre-order and delivery may take longer.

Product description

ZENISOAPBASE MAXI Aloe Vera Clear soap base is a ready-made clear soap base of European origin containing aloe vera leaf juice. Soap is made from it by melting it and pouring it into a mould. Saponification has already taken place, so no hydroxide is used during the process and the soap does not need to cure. It is suitable for hand and body soaps where colour, layering or embedded decoration should stand out.


What the soap base contains and how it behaves

The base consists of sodium soaps of fatty acids, Sodium Stearate and Sodium Laurate. The first gives the finished soap its hardness, the second its lather. The lather is supported by two surfactants, Sodium Laureth Sulfate and Disodium Laureth Sulfosuccinate.

Clarity is provided by glycerine, propylene glycol, sorbitol and sucrose. These substances prevent the soap from crystallising into an opaque mass as it sets, and they also bind water. The base is colourless and has a faint characteristic odour, so it does not distort the added dye or fragrance oil.

The composition also includes aloe vera leaf juice (Aloe Barbadensis Leaf Juice).


Use in formulation

The soap base melts at 68 °C. To process it, heat it to at least this temperature.

Dyes, fragrance oils and other additives are added to the melted base. The amount of fragrance is governed by the limit for rinse-off products that applies to the particular fragrance or essential oil. After pouring, leave the soap in the mould until it has fully set, after which it can be removed and used.

Do not overheat the base. At high temperatures it may decompose into carbon monoxide, carbon dioxide and smoke. It is enough to keep it just above the melting point.


Suitable for products such as

  • Clear hand and body soaps – coloured, fragranced or unscented
  • Layered and combined soaps – a clear layer combined with white soap base
  • Soaps with embedded decoration – dried flowers, loofah or soap figurines remain visible through the clear base
  • Gift and seasonal soaps – poured into silicone or plastic moulds

Good to know

The soap base is water-soluble and intended exclusively for rinse-off products. It is not classified as a hazardous mixture. Avoid contact with eyes during use. The base is not intended for consumption and should be kept out of the reach of children.

Clear soap bases containing glycerine attract moisture from the air. Small droplets may therefore appear on the surface of the soap.

Wrap the finished soaps as soon as possible after they have cooled, using a film that protects the surface from air moisture.


Frequently asked questions

How do you melt Aloe Vera Clear soap base?
Aloe Vera Clear soap base melts at a temperature of 68 °C. To process it, heat it to at least this temperature and then keep it just above this temperature. It should not be overheated, because at high temperatures it may decompose into carbon monoxide, carbon dioxide and smoke.
Does soap made from soap base need to cure?
No, soap made from soap base does not need to cure. Saponification took place when the base was produced, so the base is simply melted, coloured, fragranced and poured into a mould. Once fully set, the soap is ready to use. This is what sets it apart from cold process soap, which cures for several weeks.
Is Aloe Vera Clear soap base really clear?
Yes, Aloe Vera Clear soap base is colourless and clear. The clarity of the finished soap is affected by the additives. Water-soluble dyes preserve it, while pigments, clays or some fragrance oils may make the base cloudy. Air bubbles that get into the base during stirring also remain visible in clear soap.
Does Aloe Vera Clear soap base contain surfactants?
Yes, in addition to sodium soaps of fatty acids, Aloe Vera Clear soap base also contains the surfactants Sodium Laureth Sulfate and Disodium Laureth Sulfosuccinate. Together with the soap component Sodium Laurate, they provide the lather of the finished soap. Sodium Stearate gives the soap its hardness.
Can fragrance and colour be added to Aloe Vera Clear soap base?
Yes, fragrance oils, essential oils and dyes intended for soap can be added to the melted Aloe Vera Clear soap base. The amount of fragrance is governed by the limit for rinse-off products that applies to the particular oil. With a new combination, we recommend making a small test batch first and checking that the additive does not make the base cloudy.

Parameters

INCI
Aqua, Glycerin, Sodium Stearate, Propylene Glycol, Sucrose, Sodium Laurate, Sodium Laureth Sulfate, Sorbitol, Disodium Laureth Sulfosuccinate, Sodium Chloride, Aloe Barbadensis Leaf Juice, Tetrasodium EDTA
CAS No.
7732-18-5, 56-81-5, 822-16-2, 57-55-6, 57-50-1, 629-25-4, 3088-31-1 / 9004-82-4 / 68891-38-3 / 1335-72-4 / 68585-34-2 / 91648-56-5, 50-70-4 / 1259528-21-6, 39354-45-5 / 40754-59-4 / 42016-08-0 / 58450-52-5 / 68815-56-5, 7647-14-5, 85507-69-3 / 94349-62-9, 64-02-8
EC number
231-791-2, 200-289-5, 212-490-5, 200-338-0, 200-334-9, 211-082-4, 221-416-0 / 500-234-8 / 500-223-8 / 293-918-8, 200-061-5, 255-062-3, 231-598-3, 287-390-8 / 305-181-2, 200-573-9
Country of origin
European Union
Application area
BodyHands
Function in formulation
CarrierFoaming agentSurfactant
Solubility
Water-soluble
Application type
Rinse-off

Product documentation

TDSTechnical Data Sheet
Physical parameters and processingPDF ↓
SDSSafety Data Sheet
Available for purchased products —
Download all (ZIP)

1 PDF file in one archive

Gabriela B.1 Nov 2026SK

Verified purchase

Viera I.25 Oct 2026SK

Verified purchase