+421 950 333 113info@handymade.storeHandymade Days: −10 % on all ready-made productsShop now

ALUMINUM BOTTLES

Aluminium Bottle, White Lotion Pump With Glossy Gold Collar, 100 ml

Pack size50 ml100 ml200 ml225 ml

Silver aluminium bottle with white and gold pump, 100 ml The set of a 100 ml aluminium bottle and a plastic pump in white and gold is ready-made packaging for liquid and medium-thick cosmetic products that are dispensed… full description

AvailabilityIn stock · 100 pcs
Product codeO24HS100-OVD24BZ
€3.08incl. VAT

Lowest price in the last 30 days: €3.08

Volume pricing
1–199 pcs€3.08Your price
200–999 pcs€2.82−8 %
1000–4999 pcs€2.62−15 %
from 5000 pcs€2.31−25 %

Total for 1 pcs: €3.08

Quantities add up across all combinations of this bottle.

Product description

Silver aluminium bottle with white and gold pump, 100 ml

The set of a 100 ml aluminium bottle and a plastic pump in white and gold is ready-made packaging for liquid and medium-thick cosmetic products that are dispensed by pressing. Aluminium is light, does not break and shields the contents completely from light, which you will appreciate with oils, serums and emulsions containing sensitive ingredients. The pump with a 24/410 thread fits the neck of the bottle. Once screwed on, it forms both the closure and the dispensing mechanism, so there is no need to look for a suitable closure.

A volume of 100 ml corresponds to the usual pack size of body lotion, hand cream, face emulsion, liquid soap or cleansing gel. It is also suitable as a smaller travel pack of shampoo or shower gel. Both the bottle and the pump are declared suitable for contact with cosmetic products. The set is not approved for contact with food, so do not use it for homemade oils or syrups.


How the set works

The aluminium bottle has a silver metallic finish and opaque walls. The contents cannot be seen, but they are also not exposed to daylight or shelf lighting, which speeds up the oxidation of oils and the fading of dyes. Compared with glass, aluminium is considerably lighter and does not break when dropped. The set is therefore also suitable for products for the bathroom, for travel or for a gym bag.

The pump has a white body and head with gold details, and it dispenses approximately 1 ml of the contents per press. With creams and lotions, this is roughly the amount for one application to the hands or face, and with liquid soap it is enough for one wash. The dose is easy to estimate, the contents do not spill and do not come into contact with fingers, which helps protect the formulation from contamination.

  • Protection from light – the aluminium wall does not let light through, so it is suitable for oils, serums with vitamins and products with plant extracts.
  • Hygienic dispensing – the contents are dispensed without opening the packaging and without contact with the hands.
  • Low weight and durability – the bottle is lighter than a glass one and does not break.
  • Ready-made combination – the 24/410 thread of the bottle and the pump is matched, so there is no need to deal with closure compatibility.

What it is suitable for

The set is intended for products that pass smoothly through the pump: body and face lotions, lighter creams, hand emulsions, liquid soaps, cleansing gels, shampoos, conditioners with lower viscosity, massage oils and oil serums. The pump will not draw up thick creams and butters, or will dispense only part of them. For such formulations, choose a jar or a container.

Opaque aluminium is an advantage especially for oil-based products and emulsions with unstable active ingredients. For formulations where you want to see the colour or the condition of the contents, choose clear glass or PET.

Before the first filling, wash the bottle and the pump, disinfect them with isopropyl alcohol or ethanol and let them dry completely. Dry, clean packaging is the basis for the preservation in your product to work properly.


Nominal and total volume

The nominal volume is the amount the packaging is designed for under normal filling. The total brimful volume is the physical volume of the bottle up to the neck, and you will find it in the parameters. The difference between them provides room for the tube and the pump mechanism and for the expansion of the contents when the temperature changes. You should therefore fill the bottle up to the nominal volume. If it were filled to the brim, the contents would be pushed out through the neck when the pump is screwed on and part of them would be lost.


Good to know

The pump tube is longer than the height of the bottle. Trim it with a diagonal cut so that it reaches just to the bottom. A diagonal cut draws up the contents even when the end of the tube touches the bottom.

We recommend checking how the set behaves with your specific formulation. Run a test in one bottle and after several weeks check the condition of the contents and of the inside of the bottle. Also check that the pump reliably draws up a product of your viscosity and that it seals once screwed on.

After thorough washing and disinfection, the bottle can be reused. Rinse the pump by pressing it several times in clean water and then in a disinfecting solution, and let it dry. With strongly colouring or fragranced products, the plastic of the pump may become stained or retain the scent, so it is better to replace it when you change the contents.

Aluminium is a recyclable metal, and after use the bottle is sorted as metal packaging. The pump is made up of plastic and aluminium parts, so unscrew it from the bottle before disposal.

You will find closures with the same neck type and other ready-made combinations in the Handymade range. If you make your own combination, check the seal, the dispensing and the behaviour of the packaging with your specific formulation.


Frequently asked questions

Is an aluminium bottle with a pump suitable for oils and oil-based serums?
Yes, an aluminium bottle with a pump is suitable for oils and oil-based serums. The opaque wall protects oils from light, which speeds up their yellowing and oxidation. The pump dispenses approximately 1 ml per press, which for an oil corresponds to one dose for the face or hands. For very thick oils, we recommend checking that the pump draws them in reliably.
How many millilitres fit into a 100 ml aluminium bottle?
The bottle is designed to be filled with 100 ml of contents, which is its nominal volume. The total brimful volume is slightly larger and you will find it in the parameters. The difference provides room for the tube and the pump mechanism, so fill only up to the nominal volume. If it were filled to the brim, the contents would be pushed out through the neck when the pump is screwed on.
Can the aluminium bottle with pump be used for water-based and alcohol-based products?
Yes, the set is declared suitable for contact with cosmetic products, but we recommend checking its behaviour with your specific formulation. Run a test in one bottle and after several weeks check the contents and the inside of the bottle. With water-based products and liquid soaps, also check that the pump seals once screwed on and dispenses an even dose.
Is the aluminium bottle with pump suitable for food?
No, the aluminium bottle and pump set is not approved for contact with food. Both the bottle and the pump are declared suitable only for contact with cosmetic products. For homemade oils, syrups or herbal infusions, choose packaging whose parameters state that it is suitable for food contact.
How do I prepare the aluminium bottle and pump before the first filling?
Before the first filling, wash the bottle and the pump, disinfect them with isopropyl alcohol or ethanol and let them dry completely. Pump the disinfecting solution through the pump several times so that it also reaches the tube and the mechanism. If the tube extends past the bottom of the bottle, trim it with a diagonal cut. Residual water in the bottle can burden the preservation system of the product, so fill the packaging only once it is dry.
Which closure fits a 24/410 aluminium bottle?
All closures with the same thread type fit an aluminium bottle with a 24/410 neck, from caps through sprayers to pumps. In this set, the bottle is supplied with a white and gold pump. If you want a different combination, choose a closure with a 24/410 neck in the Handymade range and check the seal with your formulation.

Parameters

Aluminium bottle, 24/410, 100 ml

Product colour
Silver
Country of origin
China
Nominal capacity
100
Brimful capacity
106 ml
Diameter
40 mm
Thread type
24/410
Height
110 mm
Product material
Aluminium

Plastic dispenser, 24/410, white-gold, 180 mm

Product colour
GoldWhite
Country of origin
China
Diameter
27,5 mm
Thread type
24/410
Height
37 mm
Tube length
180 mm
Dose
1 ml

Product documentation

PPWRPackaging Declaration (PPWR)
Aluminium bottle, 24/410, 100 ml · O24HS100PDF ↓
Plastic dispenser, 24/410, white-gold, 180 mm · OVD24BZPDF ↓
PDSProduct Data Sheet
Aluminium bottle, 24/410, 100 ml · O24HS100PDF ↓
Plastic dispenser, 24/410, white-gold, 180 mm · OVD24BZPDF ↓
DrawingTechnical drawing
Aluminium bottle, 24/410, 100 ml · O24HS100PDF ↓
Plastic dispenser, 24/410, white-gold, 180 mm · OVD24BZPDF ↓
Download all (ZIP)

6 PDF files in one archive

REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.