+421 950 333 113info@handymade.store−10 %Shop now

ALUMINUM BOTTLES

Aluminium Bottle, White Lotion Pump With Glossy Gold Collar, 200 ml

Pack size50 ml100 ml200 ml225 ml

A ready-made set combining a 200 ml aluminium bottle with a plastic pump with a 24/410 neck finish, ready for filling with liquid and semi-liquid cosmetic products. full description

AvailabilityIn stock · 100 pcs
Product codeO24HS200-OVD24BZ
€3.28incl. VAT

Lowest price in the last 30 days: €3.28

Volume pricing
1–199 pcs€3.28Your price
200–999 pcs€3.01−8 %
1000–4999 pcs€2.79−15 %
from 5000 pcs€2.46−25 %

Total for 1 pcs: €3.28

Quantities add up across all combinations of this bottle.

Product description

A ready-made set combining a 200 ml aluminium bottle with a plastic pump with a 24/410 neck finish, ready for filling with liquid and semi-liquid cosmetic products. The aluminium blocks light completely, and the bottle is lightweight and does not break if dropped. It is therefore suitable for products intended for the bathroom, for travel or for retail. Each press of the pump dispenses approximately 1 ml, so the product does not need to be poured out and you do not have to put your hand into the contents.

The silver bottle body and the white and gold pump form a neutral base that lets your own product design stand out. Both parts are declared as suitable for contact with cosmetic products.


What it is suitable for

  • Body lotions and light emulsions – they pass through the pump without resistance, and the contents stay clean because you do not put your hand into them.
  • Liquid soaps and shower gels – the 200 ml volume matches a standard pack for the washbasin or shower, while the opaque aluminium protects dyes and fragrances from light.
  • Shampoos and conditioners of a more liquid consistency – the 1 ml dose lets you take exactly as much as you need.
  • Massage and body oils – light-sensitive oils are better protected in aluminium than in clear glass; with oils, check how quickly the pump piston returns.
  • Face and hair serums with lower viscosity, where a measured dose matters.

A pump with a 1 ml output will not dispense thick creams, body butters or high-viscosity gels, or will do so only with great resistance.


Volume and filling

Nominal volume is the volume the packaging is designed for under normal filling. The brimful volume is the physical volume of the bottle up to the neck, and we state it in the parameters. The difference between them serves as a reserve for the dip tube of the pump and for the expansion of the contents when the temperature changes. The bottle should therefore be filled to the nominal volume, not to the brim. If it is overfilled, the dip tube pushes the product out through the neck when the pump is screwed on, and the pump may not seat correctly.

The dip tube of the pump is supplied longer than the height of the bottle. Trim it before first use so that it reaches just above the bottom; otherwise it will bend when the pump is screwed on and the pump will draw up the contents unevenly.

After filling, screw the pump on tightly and press it a few times to prime it, until the dip tube and piston fill with product. Only then does it dispense evenly.


Good to know

Before the first filling, wash the bottle and the pump, rinse them with isopropyl alcohol or ethanol and leave them to dry completely. Residual water in the bottle would dilute the product and reduce the effectiveness of the preservative.

Aluminium is a metal. For products with a low pH, a high water content, or mixtures with essential oils and solvents, we recommend carrying out a trial filling before larger production and monitoring the packaging for several weeks. A change in fragrance, colour or the appearance of the inner surface is a sign that the particular formulation does not suit this packaging. Fill the product once it has cooled.

The set is not approved for contact with food. It is intended exclusively for cosmetic products, not for home-made oils, syrups or any other food use.

The packaging can be reused. Before a new filling, take the pump apart, flush the dip tube with clean water and then with ethanol, and wash and dry the aluminium bottle. Store empty packaging in a dry and clean environment.

Closures with the same neck finish and other ready-made packaging and closure combinations are available in the Handymade range. If you make your own combination, we recommend checking the tightness, the dispensing and the behaviour of the packaging with your specific formulation.

The bottle is made of aluminium, and the pump combines plastic and metal. Separate the two parts before disposal.


Frequently asked questions

Does an aluminium bottle protect its contents from light?
Yes, aluminium is completely opaque to light, so the contents of the bottle are protected better than in dark glass or plastic. This is useful for oils, products with plant extracts and fragrance blends that change colour or scent when exposed to light. The opacity also has a drawback: you cannot see from the outside how much product is left in the bottle.
How many ml does the white and gold pump dispense per press?
One full press of the pump dispenses approximately 1 ml of product. The actual dose depends on the consistency of the contents and on whether the piston is pressed all the way down. With thicker emulsions the dose tends to be smaller and the piston returns more slowly, while with liquid products the dispensing is more accurate.
Can the aluminium bottle with pump be used for a thick cream?
No, a pump with a 1 ml dose usually cannot pump thick creams and body butters. The combination is intended for liquid to semi-liquid products: body lotions, light emulsions, liquid soaps, shampoos, oils and serums. For thick textures, a jar or container is more suitable, or a pump with a larger dose and a wider dip tube.
Is the aluminium bottle suitable for water-based and alcohol-based products?
For water-based or alcohol-based products, we recommend carrying out a trial filling and observing the packaging for several weeks. Aluminium, as a metal, may react with some formulations, especially at low pH or with a higher electrolyte content. If neither the contents nor the inner surface of the bottle change, the packaging can also be used for these products.
Can I refill the aluminium bottle with pump?
Yes, both the bottle and the pump are intended for repeated use. Before each new filling, wash the packaging, flush the dip tube of the pump with clean water and ethanol, and leave everything to dry. Always fill it with the same type of product. Residues of the old formulation in the dip tube are not washed out completely, and if you switch recipes they would mix with the new one.

Parameters

Aluminium bottle, 24/410, 200 ml

Product colour
Silver
Country of origin
China
Nominal capacity
200
Brimful capacity
221 ml
Diameter
50 mm
Thread type
24/410
Height
140 mm
Product material
Aluminium

Plastic dispenser, 24/410, white-gold, 180 mm

Product colour
GoldWhite
Country of origin
China
Diameter
27,5 mm
Thread type
24/410
Height
37 mm
Tube length
180 mm
Dose
1 ml

Product documentation

PPWRPackaging Declaration (PPWR)
Aluminium bottle, 24/410, 200 ml · O24HS200PDF ↓
Plastic dispenser, 24/410, white-gold, 180 mm · OVD24BZPDF ↓
PDSProduct Data Sheet
Aluminium bottle, 24/410, 200 ml · O24HS200PDF ↓
Plastic dispenser, 24/410, white-gold, 180 mm · OVD24BZPDF ↓
DrawingTechnical drawing
Aluminium bottle, 24/410, 200 ml · O24HS200PDF ↓
Plastic dispenser, 24/410, white-gold, 180 mm · OVD24BZPDF ↓
Download all (ZIP)

6 PDF files in one archive

REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.