ALUMINUM BOTTLES
Aluminium Bottle, White Lotion Pump With Glossy Gold Collar, 225 ml
Pack size50 ml100 ml200 ml225 ml
An aluminium bottle with a white and gold pump combines lightweight metal packaging that blocks light with a pump that dispenses the contents straight into your palm without unscrewing anything. full description
Lowest price in the last 30 days: €3.18
Total for 1 pcs: €3.18
Quantities add up across all combinations of this bottle.
Product description
An aluminium bottle with a white and gold pump combines lightweight metal packaging that blocks light with a pump that dispenses the contents straight into your palm without unscrewing anything. The set is suitable for liquid and moderately thick cosmetic products that benefit from protection against light: shower gels, shampoos, liquid soaps, body lotions or light oils. The 225 ml volume corresponds to a standard bathroom-size pack.
The bottle withstands being dropped better than glass, which matters especially for shower and washing products. The silver surface of the bottle and the white and gold pump make a ready-made combination that you only need to fill and label.
What the set is suitable for
- Rinse-off products – shower gel, shampoo, liquid hand soap; the contents are dispensed with a single press, even with a wet hand.
- Body lotions and light emulsions – the pump handles liquid to medium-thick textures that can be drawn up through the tube.
- Body and massage oils – the opaque bottle protects oils from light, and the pump limits spillage and the contact of the contents with air.
- Facial cleansing products – cleansing milks and gels that are dispensed one dose at a time without opening the cap.
The tube cannot draw up thick creams, body butters and balms. A jar or container is more suitable for such textures.
Filling and dispensing
The bottle has a nominal volume of 225 ml. This is the volume the packaging is designed for under standard filling. The brimful capacity, that is the physical volume up to the neck, is higher. The difference between the two values leaves room for the pump tube and for the expansion of the contents when the temperature changes.
Fill to the nominal volume, not to the brim. If the bottle is overfilled, part of the contents will overflow when the pump is screwed on.
One press releases approximately 1 ml of the contents, which is sufficient for both a washing gel and a body lotion. Before first use, press the pump several times until the tube fills.
If the pump tube is longer than the inside of the bottle, shorten it before fitting so that it touches the bottom and does not bend. The pump will then draw up the contents right to the end.
Screw the pump on straight and tighten it by hand. With your own formulation, test on one piece whether the pump draws up the given contents and whether the neck stays sealed when the bottle is laid on its side.
Good to know
Both the bottle and the pump are declared as suitable for contact with cosmetic products. The set is not intended for food, as contact with food is not declared for either the bottle or the pump.
Before first filling, rinse the packaging, disinfect it with isopropyl alcohol or ethanol and let it dry completely. Prepare it in the same way for repeated use.
Aluminium is not transparent, so you cannot see from the outside how much of the contents remains in the bottle. When selling, take this into account in the labelling or in your recommendation to the customer. Check how the bottle behaves with your specific formulation in the finished recipe, especially with strongly acidic or alkaline products and with a high proportion of essential oils.
Another closure with the same neck type, as stated in the parameters, can also be screwed onto the bottle. You can find ready-made combinations of a bottle with a closure in the Handymade range. With your own combination, check the tightness and dispensing with your formulation.
The bottle is made of aluminium and is recycled as metal. The pump contains both plastic and aluminium parts, so separate it from the bottle before recycling.
Frequently asked questions
Parameters
Aluminium bottle, 24/410, 225 ml
Product documentation
- DrawingTechnical drawing
- PDF ↓
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.

















































