GLASS BOTTLES 50 ml
Amber Glass Bottle, Black Tamper Evident Safety Cap & Dropper 50 ml
Pack size5 ml10 ml15 ml30 ml50 ml100 ml
The amber glass medicine bottle with a volume of 50 ml , a short plastic dropper insert and a black safety cap make up a ready-to-use set for liquid cosmetic products that are dispensed drop by drop. full description
Lowest price in the last 30 days: €0.68
Save €0.03 with this set
Total for 1 pcs: €0.68
Quantities add up across all combinations of this bottle.
Product description
The amber glass medicine bottle with a volume of 50 ml, a short plastic dropper insert and a black safety cap make up a ready-to-use set for liquid cosmetic products that are dispensed drop by drop. It is most often filled with oil serums, face and hair oils, essential oil blends in a carrier oil, tinctures and concentrates of active ingredients. Amber glass reduces light and the dropper insert allows you to measure an exact number of drops. The whole set is declared suitable for contact with cosmetic products.
Key benefits
- Amber glass – limits the amount of light reaching the contents, which you will appreciate with oils prone to oxidation, essential oils and light-sensitive active ingredients. The glass also does not react with the contents.
- Dropper insert – an insert that is pressed into the neck after filling. The contents are then dispensed drop by drop by tilting the bottle, rather than poured out.
- Safety cap – a black smooth plastic cap that screws onto the neck of the medicine bottle.
- Matching set – the bottle, dropper insert and cap have the same neck type and are supplied together, so you do not have to match a closure to the bottle yourself.
What the set is suitable for
A volume of 50 ml corresponds to a typical bottle of face or hair oil that lasts several weeks. Oil serums with vitamin E or coenzyme Q10, essential oil blends diluted in a carrier oil, nail and cuticle oils, as well as alcohol-based tinctures and herbal infusions intended for cosmetic use are all easy to dispense drop by drop from this medicine bottle.
The dropper insert is designed for liquid contents. Thick gels, balms or emulsions would not flow through the narrow opening, so jars or bottles with a pump are more suitable for them. A certificate for direct contact with food applies only to the glass medicine bottle on its own. The set as a whole is intended for cosmetics, because the dropper insert and the cap do not have this certification.
Filling and dispensing
The nominal volume is the volume the packaging is designed for during normal filling. The brimful capacity is the physical volume up to the neck and you will find it in the parameters. The difference between them is a reserve for the dropper insert and for the expansion of the contents when the temperature changes. The medicine bottle should therefore be filled to the nominal volume, not to the brim. Otherwise, part of the contents will be pushed out when the dropper insert is pressed in.
Pour in the contents once they have cooled to room temperature, and only then press the dropper insert into the neck and screw on the cap. A small funnel or a syringe without a needle will help when filling through the narrow neck.
With concentrated blends, it is worth testing the dripping speed on one bottle before you fill the whole batch. Vegetable oils drip more slowly than alcohol-based solutions, and the number of drops per millilitre differs between them.
Good to know
Before the first filling, wash the medicine bottle, dropper insert and cap, disinfect them with isopropyl alcohol or ethanol and leave them to dry completely. Residual water in oil-based contents promotes the growth of microorganisms.
Glass withstands repeated washing and disinfection, so you can use the medicine bottle several times. The plastic dropper insert and cap retain the scent of the previous contents, so when you change the recipe it is sensible to replace at least the dropper insert.
Undiluted essential oils and solvents may gradually damage or soften plastics. With concentrated blends, we recommend checking how the dropper insert and the cap seal behave with your specific formulation before you use the set for the whole production run.
Do not heat or chill the glass abruptly, as a sudden change in temperature may damage it. At the end of its life, the medicine bottle belongs in glass recycling, while the dropper insert and cap are disposed of separately with plastics.
You will find closures with the same neck type and other ready-made bottle and closure combinations in the Handymade range. If you make your own combination, we recommend checking the tightness and dispensing with your specific formulation.
Frequently asked questions
Parameters
Glass bottle, vial, 18 mm, 50 ml
- Product colour
- Brown
- Country of origin
- European Union
- Nominal capacity
- 50
- Brimful capacity
- 58 ml
- Diameter
- 38 mm
- Thread type
- 18/410
- Height
- 91,7 mm
- Product material
- Glass
Plastic dropper for glass vials, 18 mm, short
Black Tamper Evident Safety Cap, 18/410
Product documentation
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.













































































