+421 950 333 113info@handymade.store−10 %Shop now

GLASS BOTTLES up to 10 ml

Amber Glass Bottle, Type B, Slim, Black Lotion Pump with Smoky Overcap, 10 ml

Pack size10 ml50 ml100 ml

The glass medicine bottle with lotion pump combines an amber glass bottle with a volume of 10 ml and a black lotion pump with a smoky overcap. full description

AvailabilityIn stock · 1995 pcs
Product codeO18SH010B-OVD18PC4
€0.62incl. VAT

Lowest price in the last 30 days: €0.62

Save €0.04 with this set

Volume pricing
1–199 pcs€0.62Your price
200–999 pcs€0.61−2 %
1000–4999 pcs€0.58−7 %
from 5000 pcs€0.52−17 %

Total for 1 pcs: €0.62

Quantities add up across all combinations of this bottle.

Product description

The glass medicine bottle with lotion pump combines an amber glass bottle with a volume of 10 ml and a black lotion pump with a smoky overcap. The set is suitable for small packs where each dose should be measured out and the contents protected from air and light: eye creams, serums, light creams for the face and concentrated active products that are used in small amounts.

Amber glass dampens light, so it suits formulations with vitamins, plant extracts or oils sensitive to oxidation. The lotion pump releases the contents when the head is pressed, so you do not need to reach into the bottle with your fingers and the risk of contamination is reduced. The smoky overcap protects the pump head from dust and prevents accidental pressing during transport. The set is declared suitable for contact with cosmetics.


What it is suitable for

  • Eye creams and serums – a small dose from the pump corresponds to the usual amount for a single use, while the rest of the contents stays closed.
  • Light creams and gel creams – a texture that the dip tube can draw up is dispensed evenly down to the bottom.
  • Samples and travel packs – a volume of 10 ml is enough to try out a formulation or for several weeks of use.
  • Products with sensitive active ingredients – dark glass together with closed dispensing slows the effect of light and air on the contents.

Dispensing and thickness of the contents

One press of the head releases approximately 0.14 ml of product. The pump draws up light serums and emulsions without any problem. Thicker creams, balms and anhydrous blends with a higher proportion of butters may not be drawn up through the dip tube or may be dispensed unevenly. For a thicker formulation, we recommend filling one piece and checking that the pump still draws up the contents after standing for several days.

When using it for the first time, press the head several times without product until the dip tube fills and the pump starts to dispense. This also applies after a longer break in use.


Nominal and brimful volume

The nominal volume of 10 ml is the volume for which the bottle is intended under normal filling. The brimful volume is the physical volume of the glass up to the neck and you will find it in the parameters. The difference between them provides a reserve for the dip tube and the thread of the pump and for the expansion of the contents when the temperature changes. The bottle is therefore filled up to the nominal volume. If it were filled to the brim, part of the contents would be pushed out when the pump is screwed on and the thread would be left soiled.


Good to know

Before the first filling, the bottle and the pump are washed, disinfected with isopropyl alcohol or ethanol and left to dry completely. Moisture in the dip tube or on the thread shortens the shelf life of the filled product. The glass withstands repeated washing and disinfection. The pump can be rinsed with warm water and dried with the head pressed without product.

The pump is made of polypropylene (PP). For formulations with a higher proportion of essential oils, alcohol or other solvents, we recommend checking how the pump behaves with the specific formulation. The glass itself is resistant to these ingredients.

The glass bottle on its own has a certificate for direct food contact. The set as a whole is intended for cosmetics.

The pump is screwed on firmly, but without force. If it is repeatedly tightened too hard, the thread of the pump may be damaged and the set will no longer seal.

You will find closures with the same neck finish and other ready-made combinations in the Handymade range. If you make your own combination, we recommend checking the seal, the dispensing and the behaviour of the packaging with the specific formulation. After use, the glass and the plastic pump are sorted separately by material.


Frequently asked questions

Does an amber glass medicine bottle protect the contents from light?
Yes, amber glass dampens the penetration of light and slows its effect on sensitive ingredients. It is therefore suitable for products with vitamins, plant extracts and oils prone to oxidation. The glass does not provide complete protection from light, so it is advisable to store the filled bottle away from direct sunlight.
Can the lotion pump be used for thick creams and balms?
The lotion pump is intended for light to medium-thick creams and serums. Thick balms and anhydrous blends with a higher proportion of butters may not be drawn up through the dip tube or may be dispensed irregularly. For a thicker formulation, fill one bottle and check the dispensing after standing for several days before you fill the whole batch.
How much cream does the pump dispense with one press?
One press releases approximately 0.14 ml of the contents. The actual amount depends on the thickness of the product and on whether the dip tube is completely filled. With a light serum the dose is stable, while with a thicker cream it may vary. For eye creams and concentrated serums, this amount corresponds to the usual dose for a single use.
How many millilitres should a medicine bottle with a pump be filled to?
The bottle is filled up to the nominal volume of 10 ml, not to the brim. The brimful volume is larger and you will find it in the parameters. The difference serves as a reserve for the dip tube of the pump and for the expansion of the contents when the temperature changes. If the bottle is overfilled, part of the contents is pushed out through the neck when the pump is screwed on and soils the thread.
Is the medicine bottle and pump set suitable for food?
No, the set as a whole is intended for cosmetics. The glass bottle on its own has a certificate for direct food contact, whereas the plastic lotion pump does not have this declaration. For food use, the bottle must be combined with a closure whose food contact has been verified separately.

Parameters

Glass bottle, vial type B, tall, 18 mm, 10 ml

Product colour
Brown
Country of origin
European Union
Nominal capacity
10
Brimful capacity
12 ml
Diameter
24,2 mm
Thread type
18/410
Height
63,7 mm
Product material
Glass

Black plastic cream dispenser, smoke lid, 18/415

Product colour
Black
Country of origin
China
Diameter
22,1 mm
Thread type
18/415
Height
41,6 mm
Tube length
115 mm
Dose
0,14 ml

Product documentation

PPWRPackaging Declaration (PPWR)
Glass bottle, vial type B, tall, 18 mm, 10 ml · O18SH010BPDF ↓
PDSProduct Data Sheet
Glass bottle, vial type B, tall, 18 mm, 10 ml · O18SH010BPDF ↓
Black plastic cream dispenser, smoke lid, 18/415 · OVD18PC4PDF ↓
DrawingTechnical drawing
Glass bottle, vial type B, tall, 18 mm, 10 ml · O18SH010BPDF ↓
Black plastic cream dispenser, smoke lid, 18/415 · OVD18PC4PDF ↓
Download all (ZIP)

5 PDF files in one archive

REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.