GLASS BOTTLES 50 ml
Amber Glass Bottle, Slim, Black Lotion Pump with Smoky Overcap, 50 ml
Amber glass medicine bottle, tall, lotion pump, 50 ml A ready-made set for filling creams, emulsions and thicker serums: a tall, slender amber glass medicine bottle with a capacity of 50 ml and a black lotion pump with… full description
Lowest price in the last 30 days: €0.86
Total for 1 pcs: €0.86
Quantities add up across all combinations of this bottle.
Product description
Amber glass medicine bottle, tall, lotion pump, 50 ml
A ready-made set for filling creams, emulsions and thicker serums: a tall, slender amber glass medicine bottle with a capacity of 50 ml and a black lotion pump with a smoky overcap. The dark glass reduces exposure to light, which helps with contents containing vegetable oils, vitamins or essential oils that spoil faster in light. The pump dispenses the contents without touching them with your fingers, so it is particularly suitable for leave-on products where hygiene matters: face and eye creams, light ointments, small-size body emulsions or cream serums.
The set is declared suitable for contact with cosmetics. The separate medicine bottle also has a certificate for direct food contact, while the pump does not, so the set as a whole is intended for cosmetic products.
What the set is suitable for
- Face and eye creams – small daily doses, the contents are not exposed to air or fingers.
- Cream serums and thicker emulsions – the pump handles a more viscous texture that would not flow out of a bottle with a dropper.
- Gel creams and gels – as long as they are not too sticky and do not form a plug in the tube.
- Samples and travel sizes – 50 ml is enough for testing a formulation or as a gift.
For very thick anhydrous balms, butters that solidify at room temperature and products with particles (scrubs, clay products), we recommend testing with the finished formulation first. The pump cannot draw up contents that are too solid, and particles may clog it. Thin toners and oils are too runny for a lotion pump; a dropper or sprayer is more suitable for them.
Capacity and filling
The nominal volume is the amount the packaging is designed for under normal filling, in this case 50 ml. The brimful capacity, that is the physical volume up to the neck, is stated in the parameters and is higher. The difference leaves room for the pump with its dip tube and for the contents expanding with changes in temperature. Fill to the nominal volume, not to the brim. If the medicine bottle is full, the contents will overflow through the neck when the pump is screwed on and soil the thread.
Pour the emulsion in only after it has cooled to room temperature. A hot product poured into cold glass can damage the medicine bottle, and in a closed bottle a vacuum forms as it cools, which makes the first priming of the pump more difficult.
The pump tube is longer than necessary so that it can be adapted to other packaging with the same neck. Check it before first use and shorten it if needed so that it reaches just above the bottom of the medicine bottle. The pump will then draw up almost all of the contents and only a thin layer will remain at the bottom.
Good to know
One press dispenses approximately 0.14 ml, which corresponds to a usual dose of face or eye cream. For a body emulsion, expect several presses. After filling, press the pump several times to prime it until the tube fills and the dispensing becomes consistent.
The smoky overcap protects the pump head from dust and accidental pressing during transport. Therefore always keep it on when travelling.
Before the first filling, wash the medicine bottle, disinfect it with isopropyl alcohol or ethanol and let it dry completely. Rinse the pump with alcohol and let it dry as well. Residual water in the tube would dilute the first doses and could weaken the preservative system.
After thorough washing, you can reuse the medicine bottle. The pump is harder to clean, as the tube and the inner mechanism retain residues of the previous product. When changing the formulation, rinse it with warm water with a little washing-up liquid, then with clean water and finally with alcohol, or, better still, replace it with a new one. You can find replacement pumps with the same neck type and other ready-made combinations in the Handymade range.
The pump is made of polypropylene. For formulations with a higher content of essential oils, fragrance compositions or solvents, test whether the plastic changes over time and whether the pump remains sealed.
When recycling, separate the glass from the plastic pump. The medicine bottle goes with glass, the pump with plastics, according to the rules in your municipality.
Frequently asked questions
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.



















































































