+421 950 333 113info@handymade.storeActive Days: −10 % with code ACTIVE10Shop now

GLASS BOTTLES up to 10 ml

Amber Glass Bottle, Type B, Slim, White Lotion Pump, 10 ml

Pack size10 ml50 ml100 ml

The glass medicine bottle with lotion pump is a small packaging format for eye creams, concentrated serums and trial batches. full description

AvailabilityIn stock · 463 pcs
Product codeO18SH010B-OVD18PB2
€0.62incl. VAT

Lowest price in the last 30 days: €0.62

Volume pricing
1–199 pcs€0.62Your price
200–999 pcs€0.57−8 %
1000–4999 pcs€0.54−13 %
from 5000 pcs€0.49−22 %

Total for 1 pcs: €0.62

Quantities add up across all combinations of this bottle.

Product description

The glass medicine bottle with lotion pump is a small packaging format for eye creams, concentrated serums and trial batches. It combines an amber glass bottle with a nominal volume of 10 ml and a white polypropylene pump. Amber glass reduces light transmission, so contents sensitive to sunlight, such as serums with vitamin C, retinol or plant extracts, stay better protected. The pump dispenses the contents in small, repeatable doses, and your fingers do not come into contact with the product inside.

The set is declared as suitable for contact with cosmetics. Only the glass bottle on its own has a certificate for direct food contact; the pump does not, so the set as a whole is intended for cosmetic products.


How the set works

The bottle is shaped like a tall medicine bottle with a narrower neck, stands stably and is easy to hold even at a small volume. The lotion pump is intended for thicker textures: creams, gels and serums with higher viscosity, which would be dispensed inaccurately from a dropper. One dose is approximately 0.14 ml, which for an eye cream or a concentrated serum corresponds to the amount for a single use.

The dip tube of the pump is longer than the bottle. Before the first assembly, trim it so that it ends just above the bottom and draws up the contents all the way to the end. Very thin, watery contents are harder to dispense through a lotion pump. For these, a fine mist sprayer or a dropper with the same neck type is more suitable.


Nominal and total volume

The nominal volume of 10 ml is the volume the packaging is designed for in normal filling. The total brimful volume given in the parameters is the physical volume of the bottle up to the neck. The difference between them provides room for the dip tube and the body of the pump, and for the expansion of the contents with changes in temperature. Therefore, fill to the nominal volume, not to the brim.

After filling, screw on the pump and press it several times until the dip tube and the head fill with the contents. The first doses are often weaker or empty; this is not a defect of the pump.


Preparation and reuse

Before the first filling, wash the bottle and the pump, disinfect them with isopropyl alcohol or ethanol and leave them to dry completely. Residual water in the dip tube can dilute the first doses and, in preservative-free products, reduce their stability.

Glass does not react with essential oils or with common solvents, so the bottle is also suitable for aromatic serums and oil blends. Let the contents cool down before filling; a hot emulsion poured into cold glass can damage the bottle. After thorough washing, the bottle can be used repeatedly. Rinse the pump by pumping warm water with a little surfactant through it and then clean water. Residues of thick creams are difficult to remove from the dip tube, so a new pump is safer for a new batch.

If you combine the bottle with a different closure, check the tightness, the dispensing and the behaviour of the packaging with your specific formulation. You will find closures with the same neck type as well as ready-made sets in the Handymade range.


What it is suitable for

  • Eye creams and serums – a small dose per press, with no contact between your fingers and the contents.
  • Concentrated facial serums – amber glass protects light-sensitive active ingredients.
  • Creams and balms with a lighter texture – the contents must pass through the dip tube; the pump cannot draw up solid balms.
  • Samples and trial batches – 10 ml is enough to test a recipe before making a larger quantity.
  • Gift and travel packs – glass looks more premium than plastic and does not weigh much at a small volume.

Recycling

The empty bottle belongs in glass waste; the polypropylene pump is sorted separately with plastics. Unscrew the two parts before disposal.


Frequently asked questions

Does an amber glass medicine bottle protect the contents from light?
Yes, amber glass transmits less light than clear glass and slows down light-induced changes in the contents. It is a better choice than clear packaging for serums with vitamin C, retinol or unstable plant extracts. It does not provide complete protection, so store the packaging out of direct sunlight and, depending on the needs of the specific recipe, in a cool place.
How much fits into a 10 ml medicine bottle with a pump?
Fill it to the nominal volume of 10 ml, even though the bottle has a larger volume up to the brim. The reserve is for the dip tube and the body of the pump, and for the expansion of the contents with changes in temperature. If you fill it up to the neck, part of the contents is pushed out when the pump is screwed on, and the packaging may not seal.
Can a glass medicine bottle with a lotion pump be used for thin serums?
Only to a limited extent; the pump is designed for creams and thicker serums. Very thin, watery contents are dispensed unevenly through a lotion pump and may leak. For watery toners and liquid serums, a fine mist sprayer or a dropper with the same neck type, which you will find in the Handymade range, is more suitable.
How do I prepare a medicine bottle with a pump before the first filling?
Wash the bottle and the pump, disinfect them with isopropyl alcohol or ethanol and leave them to dry completely. Trim the dip tube of the pump to the height of the bottle so that it ends just above the bottom. After filling, press the pump several times until it starts dispensing evenly.
Is a glass medicine bottle with a pump suitable for food?
No, the set as a whole is intended for cosmetic products. Only the glass bottle on its own has a certificate for direct food contact; the plastic lotion pump does not. If you need packaging for homemade oils or syrups, choose the bottle on its own with a different closure that is declared for food contact.

Parameters

Glass bottle, vial type B, tall, 18 mm, 10 ml

Product colour
Brown
Country of origin
European Union
Nominal capacity
10
Brimful capacity
12 ml
Diameter
24,2 mm
Thread type
18/410
Height
63,7 mm
Product material
Glass

Plastic cream dispenser, 18 mm, white

Product colour
WhiteClear
Country of origin
China
Diameter
22,2 mm
Thread type
18/415
Height
40,2 mm
Tube length
115 mm
Dose
0,14 ml

Product documentation

PPWRPackaging Declaration (PPWR)
Glass bottle, vial type B, tall, 18 mm, 10 ml · O18SH010BPDF ↓
PDSProduct Data Sheet
Glass bottle, vial type B, tall, 18 mm, 10 ml · O18SH010BPDF ↓
Plastic cream dispenser, 18 mm, white · OVD18PB2PDF ↓
DrawingTechnical drawing
Glass bottle, vial type B, tall, 18 mm, 10 ml · O18SH010BPDF ↓
Plastic cream dispenser, 18 mm, white · OVD18PB2PDF ↓
Download all (ZIP)

5 PDF files in one archive

REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.