+421 950 333 113info@handymade.store−10 %Shop now

PLASTIC BOTTLES

Amber Plastic Bottle, Black Ribbed Cap, 150 ml

Pack size100 ml150 ml200 ml300 ml

Plastic bottle, amber, black ribbed cap, 150 ml A ready-made combination of an amber 150 ml PET bottle and a black ribbed cap with a 24/410 neck finish. full description

AvailabilityIn stock · 1380 pcs
Product codeO24PH150-OVV24PC3
€0.85incl. VAT

Lowest price in the last 30 days: €0.85

Save €0.02 with this set

Volume pricing
1–289 pcs€0.85Your price
290–1159 pcs€0.80−6 % · 1× plato
1160–5219 pcs€0.74−13 % · 4× plato
from 5220 pcs€0.65−23 % · 18× plato

Total for 1 pcs: €0.85

Quantities add up across all combinations of this bottle.

Product description

Plastic bottle, amber, black ribbed cap, 150 ml

A ready-made combination of an amber 150 ml PET bottle and a black ribbed cap with a 24/410 neck finish. Amber plastic reduces light exposure, so this set suits contents that are sensitive to light: vegetable oils, oil serums, toners with active ingredients and hydrosols. PET is lightweight and unbreakable, so the bottle holds up in the bathroom, while travelling and when shipped to customers.

The cap unscrews and the contents are poured out of the bottle. This set is therefore suitable for products that are dispensed into the palm or onto a cotton pad, and for packaging that is opened only occasionally. Both the bottle and the cap are declared suitable for contact with cosmetics. The set is not declared suitable for contact with food.


What it is suitable for

  • Toners and facial waters – water-based products applied onto a cotton pad or into the palm.
  • Oils and oil serums – vegetable oils and blends with essential oils that are used up gradually after opening.
  • Shampoos and shower gels in smaller packs – 150 ml is enough for a sample, a travel pack or a trial batch.
  • Hydrosols and hair tonics – if they are dispensed by pouring. For spraying, choose a closure with a sprayer.

Good to know

The nominal volume is the volume the bottle is designed for in normal filling. The brimful capacity listed in the parameters is the physical volume up to the neck. The difference between them provides a reserve for the cap liner and for the expansion of the contents with changes in temperature. Therefore, fill the bottle to the nominal volume, not to the brim, otherwise the contents will be pushed into the thread when the bottle is closed.

The cap is made of polypropylene and has a foam polyethylene (EPE) liner that sits on the neck and helps to seal the bottle. The ribbed surface makes the cap easier to unscrew, even with wet hands. The bottle is sealed by tightening the cap by hand, not by force.

Before the first filling, wash the bottle and the cap, disinfect them with isopropyl alcohol or ethanol and let them dry completely. Residual water in the packaging dilutes the product and puts a strain on the preservative system.

PET does not tolerate high temperatures. Fill the finished product into the bottle only after it has cooled down, as a hot emulsion or a melted oil phase can deform the plastic. For blends with a higher proportion of essential oils or with solvents, we recommend checking how the packaging behaves with the specific formulation, ideally on a single piece and over several weeks.

If you combine this bottle with a different closure, always check the tightness of the filled packaging in a tilted position and the behaviour of the contents after several days. You can find closures with the same neck type and other ready-made sets in the Handymade range.

After washing and disinfection, the bottle can be reused, but the cap liner gradually compresses and the seal weakens. For packaging intended for sale, we always recommend a new cap. After use, both the PET bottle and the PP cap belong in sorted plastic waste. Before recycling, it is enough to empty them and separate the parts.


Frequently asked questions

Does an amber PET bottle protect the contents from light?
Amber plastic considerably reduces the transmission of light, but it does not block it completely. For oils, serums and toners with active ingredients, an amber bottle is more suitable than a clear one because it slows down changes caused by light. Even so, we recommend keeping the filled packaging out of direct sunlight, especially for products with essential oils or sensitive antioxidants.
How much product fits into a 150 ml bottle?
The bottle is designed for 150 ml of product, which is its nominal volume. Physically it holds more, and the brimful capacity is listed in the parameters. The difference serves as a reserve for the cap liner and for the expansion of the contents in warm conditions. If you fill to the brim, the contents are pushed out when the bottle is closed and the packaging does not seal.
Can a hot product be filled into a 150 ml plastic bottle?
No, a hot product does not belong in a PET bottle. The plastic deforms at higher temperatures and the neck may then no longer seal. Let emulsions, balms and oils cool to room temperature and only then fill them. For products that solidify as they cool, choose a wide-neck jar instead.
Is a plastic bottle with a cap suitable for oils containing essential oils?
Common vegetable oils and oil serums with a usual usage rate of essential oils can be filled into a PET bottle. For a high proportion of essential oils, for perfume compositions or for blends with solvents, we recommend testing how the packaging behaves on a trial piece. Watch for changes in shape, cloudiness of the plastic and the condition of the cap liner after several weeks.
How do you clean a 150 ml plastic bottle before reuse?
Wash the bottle with warm water and detergent, rinse it thoroughly and let it dry with the neck facing down. Then disinfect it with isopropyl alcohol or ethanol and let the alcohol evaporate. Clean the cap in the same way, including the liner. For packaging intended for sale, it is better to replace it with a new one.

Parameters

Brown plastic bottle, 24/410, 150 ml

Product colour
Brown
Country of origin
European Union
Nominal capacity
150
Brimful capacity
170 ml
Diameter
49 mm
Thread type
24/410
Height
118 mm
Product material
PETPlastic

Plastic cap, 24/410, ribbed black

Product colour
Black
Country of origin
China
Diameter
27 mm
Thread type
24/410
Height
18 mm
Product material
PPPlasticEPE

Product documentation

PPWRPackaging Declaration (PPWR)
Brown plastic bottle, 24/410, 150 ml · O24PH150PDF ↓
Plastic cap, 24/410, ribbed black · OVV24PC3PDF ↓
PDSProduct Data Sheet
Brown plastic bottle, 24/410, 150 ml · O24PH150PDF ↓
Plastic cap, 24/410, ribbed black · OVV24PC3PDF ↓
DrawingTechnical drawing
Brown plastic bottle, 24/410, 150 ml · O24PH150PDF ↓
Download all (ZIP)

5 PDF files in one archive

REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.