CLEANING & WASHING
Baking soda, Sodium Bicarbonate, 5 kg
Baking soda (sodium bicarbonate) is a mildly alkaline salt that fizzes with citric acid in bath bombs, absorbs odours in deodorants and increases alkalinity in cleaning products. full description
Lowest price in the last 30 days: €10.79
Product description
Baking soda (sodium bicarbonate) is a mildly alkaline salt that fizzes with citric acid in bath bombs, absorbs odours in deodorants and increases alkalinity in cleaning products. We supply it in cosmetic grade and food grade (E 500(ii)).
How it works in a product
Fizzing is a chemical reaction with an acid. When baking soda meets citric acid in water, carbon dioxide is released and the bath bomb breaks apart in a burst of bubbles. Bath bombs and fizzy bath salts both rely on this reaction.
In deodorants it absorbs odours. A balm or powder deodorant containing it works noticeably better than the same formulation without it. However, it can irritate sensitive skin, so only a small amount is used in leave-on products.
In cleaning products and washing powders it increases alkalinity and acts as a buffer, that is, it helps keep the pH of the solution stable. Undissolved crystals also scrub mechanically, which is used in rinse-off scrubs.
Key properties
- Fizzing ingredient – reacts with citric acid and other acids, releasing CO₂.
- Odour absorption – absorbs odours in balm and powder deodorants.
- pH regulator and buffer – a 1% solution has a pH of 8.5 at most; the recommended formulation pH is around 8.3.
- Abrasive ingredient – undissolved particles scrub surfaces and skin.
- Purity – contains at least 99.3% sodium bicarbonate and at most 0.5% magnesium stearate of vegetable origin, which improves flowability. It is suitable for vegans.
Use in formulations
Solubility determines how the raw material is handled. It dissolves in water at approximately 96 g per litre at 20 °C and does not dissolve in oil or in ethanol. In water-based cleaners, add it to the water and stir until fully dissolved. In anhydrous balms and powder mixes it remains dispersed as a powder.
The aqueous solution is not completely clear. Magnesium stearate does not dissolve in water, so the solution is slightly cloudy and a thin oily film may appear on the surface. This is not a defect of the raw material, but you need to allow for it in products that are meant to be clear.
Process it at a temperature of up to 50 °C. At higher temperatures it begins to decompose into sodium carbonate, carbon dioxide and water. The alkalinity of the product then rises and fizzing declines.
Mix baking soda into a balm deodorant only once the mixture has cooled, just before pouring. For a powder deodorant, we recommend grinding it finely beforehand so that it is less abrasive on the skin.
The usage rate ranges from 0.1 to 50% depending on the type of product. As a guide:
- surface, window and shower cleaners – 0.3–3%
- balm deodorant – around 2%
- powder deodorant – around 20%
- washing powder – around 21%
- powder shampoo – around 42%
In cleaning products it is most often combined with sodium gluconate, sodium carbonate, sodium citrate, sodium chloride and potassium hydroxide.
Suitable for products such as
- bath bombs and fizzy bath salts
- balm deodorants and powder deodorants
- powder shampoos
- oral care products
- rinse-off body scrubs and foot baths
- washing powders and surface, window and shower cleaners
Good to know
A fizzing mixture reacts even to humidity in the air. A bomb that absorbs moisture during production or drying starts to react prematurely, swells and then fizzes less in the bath. Keep the mixture as dry as possible and pack finished products airtight.
In liquid products containing an acidic ingredient, baking soda reacts directly in the packaging. The product foams, the packaging swells and the solution loses its alkalinity.
The pH of an aqueous solution changes even when it is left to stand for a longer time. We recommend checking it after preparation and again before filling.
Caution is needed on the face. Alkalinity combined with scrubbing can disrupt the skin barrier and cause irritation with frequent use. In facial care it is therefore better suited to rinse-off products and low usage rates.
The raw material is not classified as hazardous under the CLP Regulation. When handling it, avoid raising dust and avoid contact with eyes and skin.
Frequently asked questions
Parameters
- INCI
- Sodium Bicarbonate
- CAS No.
- 144-55-8
- EC number
- 205-633-8
- Product colour
- White
- Country of origin
- Bosnia and Herzegovina
- Processing method
- Chemical reactionDryingCrystallisationFiltration
- Odour
- Odourless
- Appearance
- Powder
- Free from
- formaldehyde and formaldehyde donorspreservativesalcoholEDTAPEGsulfatesethylene oxide (EO)parabenssiliconesallergenic fragrance substancesphthalatespalm oil-derived ingredients
- Formulation phase
- Water phasePost-addition
- Recommended processing temperature
- < 50 °C
- Function in formulation
- Abrasive agentOdour absorptionpH adjusterBuffering agent
- Recommended usage rate
- 0,1 – 50 %
- Recommended formulation pH range
- 8,3
- Suitable for
- All skin types
- Biodegradability
- Not applicable
- Natural Index (NI ISO 16128)
- 1,00
- Natural Origin Index (NOI ISO 16128)
- 1,00
Product documentation
Learn how to work with it
From our blogflawless!
Translated automatically
Variant: Sóda bikarbóna, hydrogénuhličitan sodný, 1 kg
Variant: Sóda bikarbóna, hydrogénuhličitan sodný, 1 kg




























