GLASS BOTTLES 30 ml
Clear Frosted Glass Bottle, Black Tamper Evident Safety Cap & Dropper 30 ml
A frosted glass bottle with a short dropper insert and a black safety cap makes a ready-to-use set for 30 ml of oils, serums and other liquid products that are dispensed drop by drop. full description
Lowest price in the last 30 days: €0.79
Total for 1 pcs: €0.79
Quantities add up across all combinations of this bottle.
Product description
A frosted glass bottle with a short dropper insert and a black safety cap makes a ready-to-use set for 30 ml of oils, serums and other liquid products that are dispensed drop by drop. The matte glass softens incoming light while still letting the liquid level show through, so you can see at a glance how much is left. The dropper insert fitted in the neck releases the contents one drop at a time, and the safety cap does not loosen on its own when carried or handled normally. All three parts of the set are declared suitable for contact with cosmetics.
What it is suitable for
- Face and body oils – the volume matches a standard pack of face oil, and the dropper insert dispenses the amount for a single application without spilling.
- Oil serums and drops – thick serums are released from the dropper insert more slowly, so dispensing is more precise than from an open neck.
- Essential oil blends – diluted and undiluted blends for a diffuser, bath or carrier oil, where drops are counted.
- Tinctures and alcohol extracts – glass tolerates alcohol, but check in advance how the plastic dropper insert and cap behave with strongly alcoholic blends.
- Samples and test batches – the small volume suits stability tests or handing out samples to customers.
How the set works
After filling, the short dropper insert is pressed into the neck of the bottle, where it stays permanently. The contents then do not flow out in a stream but are released drop by drop when the bottle is tilted. The size and speed of the drop depend on the viscosity: watery hydrosols flow quickly, a thick oil serum slowly, and it sometimes helps to tap the bottom lightly.
The cap is screwed over the dropper insert onto the thread of the bottle. The safety mechanism prevents the closure from loosening on its own, and opening requires a deliberate action. Try the opening method on an empty bottle before filling, so that you can describe it to your customers.
Press the dropper insert into the neck only after filling and wiping the thread. Oil residue on the neck weakens the seal of the cap, and the packaging may then leak in transit.
Volume and filling
The nominal volume of 30 ml is the amount the bottle is designed for under normal filling. The brimful capacity is the physical volume up to the neck, and you will find it in the parameters. The difference between the two is a reserve for the dropper insert and for the expansion of the contents when the temperature changes. For this reason, fill only up to the nominal volume. If you fill to the brim, the dropper insert pushes part of the contents out and makes it harder to fit the cap.
Good to know
Before the first filling, wash the bottle, rinse it with isopropyl alcohol or ethanol and let it dry completely. The same applies to the dropper insert and the cap, where water stays longer in the cavities.
Glass does not tolerate sudden changes in temperature. Let a heated oil phase or a still warm mixture cool to room temperature before filling.
Frosted glass scatters light, but it does not protect against it as amber or blue glass does. Store finished products containing light-sensitive ingredients away from direct sunlight.
With undiluted essential oils and strongly alcoholic blends, check in advance how the plastic dropper insert and cap behave. Fill one bottle, leave it to stand for several weeks, and then check the seal and the appearance of the plastic.
Once empty, the bottle can be washed and used again. The dropper insert is harder to remove, and its narrow channel cannot be reliably cleaned of oil, so replace it with a new one when refilling. When sorting waste, glass goes with glass, while the dropper insert and cap are separated and belong with plastics.
You will find other closures with the same neck type, as well as ready-made combinations of the bottle with a different closure, in the Handymade range. If you make your own combination, we recommend checking the seal and dispensing with your specific formulation.
Frequently asked questions
Parameters
Clear frosted glass bottle, 18 mm, 30 ml
Plastic dropper for glass vials, 18 mm, short
Black Tamper Evident Safety Cap, 18/410
Product documentation
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.



















































































