GLASS BOTTLES 50 ml
Clear Frosted Glass Bottle, Black Tamper Evident Safety Cap & Dropper, 50 ml
Dispensing drop by drop without pouring out the contents: this set of a glass bottle with a short plastic dropper insert and a black safety cap is designed for exactly that. full description
Lowest price in the last 30 days: €0.91
Save €0.02 with this set
Total for 1 pcs: €0.91
Quantities add up across all combinations of this bottle.
Product description
Dispensing drop by drop without pouring out the contents: this set of a glass bottle with a short plastic dropper insert and a black safety cap is designed for exactly that. The volume of 50 ml and the 18/410 neck finish suit facial oils, oil serums, blends of essential oils with a carrier oil, or tinctures, where the contents are measured out in drops.
Frosted glass softens the light while still letting the contents show through slightly, so you can see how much liquid is left. Glass is not affected by oils or alcohol extracts and can be washed repeatedly. The whole set is declared suitable for contact with cosmetics, and the declaration of conformity is available with the product.
How the set works
- Bottle – frosted glass with a nominal volume of 50 ml and an 18/410 neck.
- Dropper insert – a short PP insert that is pressed into the neck and reduces the opening. The liquid then flows out in drops and is dispensed precisely.
- Safety cap – a smooth black closure made of PP and PE. The safety mechanism prevents accidental opening, which you will appreciate especially during transport.
What it is suitable for
It works best with liquids of low to medium viscosity: light vegetable oils, oil serums, diluted blends of essential oils, tinctures and alcohol extracts, cosmetic oils for nails and cuticles, or beard oils. Oil blends with a higher proportion of butters, or thick serums, drip slowly through a short dropper insert. For such contents, we recommend checking the behaviour on a single bottle before filling a whole batch.
Aqueous solutions and toners can also be stored in this bottle, but the dropper insert limits the amount that flows out at once. For products applied in larger quantities, a pump or sprayer is more suitable.
Good to know
The nominal volume is the amount the bottle is intended to hold in normal filling. The brim-full capacity given in the parameters is the physical volume up to the top of the neck. The difference provides a reserve for the dropper insert, which takes up part of the neck, and for the expansion of the contents when the temperature changes. Fill only up to the nominal volume, not to the brim, otherwise the dropper insert will push the contents out when pressed in.
Before the first filling, wash the bottle, dropper insert and cap, disinfect them with isopropyl alcohol or ethanol and leave them to dry completely. Residual water in the neck or dropper insert shortens the stability of oil-based products.
The dropper insert is placed into the dry neck only after filling. Press it in evenly around the whole circumference until it sits level with the neck. The cap is then tightened over the dropper insert and holds it in place. For concentrated essential oils, anhydrous fragrance blends or contents with a high proportion of solvents, we recommend checking how the plastic dropper insert and the cap seal behave in contact with the specific formulation.
Glass does not tolerate sudden temperature changes well. Do not pour hot contents into a cold bottle, and do not expose a filled bottle to frost or direct sunlight, even though frosted glass softens part of the light.
After thorough washing and disinfection, the bottle can be reused. When changing the contents, it is better to replace the dropper insert, because residues of fragrance and oil are difficult to remove from the small opening. Glass belongs in glass recycling, the cap and dropper insert in plastic recycling.
Closures with the same neck type and other ready-made bottle and closure combinations can be found in the Handymade range. If you combine parts yourself, we recommend checking the tightness and dispensing with your specific formulation.
Frequently asked questions
Parameters
Glass bottle, frosted clear, 18 mm, 50 ml
Plastic dropper for glass vials, 18 mm, short
Black Tamper Evident Safety Cap, 18/410
Product documentation
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.
















































































