GLASS BOTTLES 30 ml
Clear Frosted Glass Bottle, Glossy Black Dropper, 30 ml
The 30 ml glass dropper bottle is designed for a face serum, face oil or active ingredient concentrate that is dispensed drop by drop. The frosted clear glass dims part of the light and only hints at the contents. full description
Lowest price in the last 30 days: €1.13
Total for 1 pcs: €1.13
Quantities add up across all combinations of this bottle.
Product description
The 30 ml glass dropper bottle is designed for a face serum, face oil or active ingredient concentrate that is dispensed drop by drop. The frosted clear glass dims part of the light and only hints at the contents. The black glossy dropper gives the bottle a uniform look and allows precise application onto the palm or into the cosmetics you are preparing. The set consists of a bottle and a dropper with a shared 18/410 neck finish; both parts are declared as suitable for contact with cosmetic products.
The 30 ml volume corresponds to a typical serum pack that lasts a few weeks of use, so the bottle suits your own formulations with a limited shelf life as well as smaller runs for customers. Glass does not react with the contents, so both the fragrance and the active ingredients remain as you mixed them.
What it is suitable for
- Face serums – water-based and gel serums with hyaluronic acid, niacinamide and other active ingredients, where a few drops are dispensed per use.
- Face and body oils – blends of vegetable oils, cuticle oils, beard and moustache oils.
- Essential oil blends in a carrier oil – the dropper makes dispensing into a bath, massage oil or diffuser easier.
- Concentrates and samples – a small amount of an active ingredient or a test batch that you want to hand over for testing without a large pack.
Nominal and total volume
The nominal volume of 30 ml is the amount the bottle is designed for in normal filling. The brimful volume is the physical volume up to the neck, and you can find it in the parameters. The difference between them is a reserve for the dropper, which pushes part of the contents upward when screwed in, and for expansion of the contents when the temperature changes. Therefore fill the bottle to the nominal volume, not to the brim.
After filling, insert the dropper first and only then check the level. If the contents reach the thread, remove a few millilitres, otherwise they will be pushed out when closing and soil the thread.
Using the dropper
The length of the dropper is adapted to this bottle, so it also picks up the remainder of the contents at the bottom. Squeeze the bulb before immersing it and release it slowly below the surface; the tube fills, and you then control dispensing drop by drop with finger pressure. The dropper combines a glass tube, aluminium, PP and silicone. For alcohol-based contents and concentrated essential oils, we therefore recommend checking the behaviour of the bulb and the seal with your specific formulation. The glass of the bottle tolerates water-based, alcohol-based and oil-based contents.
Good to know
- Preparation before first filling – wash the bottle and the dropper, rinse them, including the dropper tube, with isopropyl alcohol or ethanol, and let them dry completely. Residual water would introduce moisture into an anhydrous oil.
- Glass and heat – pour only cooled mixtures into the bottle. A hot fill in cold glass may crack it, and the dropper should not be screwed onto warm contents.
- Light – frosted glass dims the light, but it does not shield the contents from it completely. For light-sensitive substances such as retinol or ascorbic acid, amber or blue glass is more suitable, or storage away from direct light.
- Reuse – after thorough washing and disinfection, you can fill the bottle again. The bulb of the dropper gradually loses its elasticity; when it is worn, replace it with a new dropper with the same thread.
- Other closures – closures with an 18/410 neck finish from the Handymade range fit the neck, and you will also find ready-made combinations there. If you make your own combination, check the tightness and dispensing with your specific formulation.
- Recycling – the bottle belongs in glass waste; the dropper consists of several materials and is sorted separately from the glass bottle.
The set is intended for cosmetics. Neither the bottle nor the dropper has a certificate for food contact, so do not use it for edible oils, syrups or herbal infusions.
Frequently asked questions
Parameters
Clear frosted glass bottle, 18 mm, 30 ml
Product documentation
- PPWRPackaging Declaration (PPWR)
- PDF ↓
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.



















































