Yes, the packaging can be used repeatedly if hygiene principles are observed. However, before each new filling it is necessary to thoroughly clean and disinfect both the bottle and the spray pump in order to minimise the risk of microbial contamination. For disinfection, we recommend using a suitable alcohol-based preparation, for example isopropyl alcohol or ethanol, which you can find in the offer as IPA 99 % isopropyl alkohol or Etanol 96 % denaturovaný rastlinný. After disinfection, allow all parts to dry thoroughly and only then proceed to refilling.

The bottle with spray pump is most suitable for liquid products with low to medium viscosity that need to be applied in the form of a fine mist or spray. These are mainly facial and body waters, thermal and hydrating sprays, hair tonics, perfumed or aromatic sprays and light disinfectant solutions. Thick emulsions, gels or oils with high viscosity may not be ideal for this type of spray pump, so it is always advisable to test the behaviour of the specific formulation in advance.

Before reuse, it is appropriate to clean the bottle mechanically (rinse with warm water and a suitable cleaning agent), rinse thoroughly and allow to dry. Subsequently, we recommend disinfecting the inner surface of the packaging and the parts of the spray pump with an alcohol solution, for example with the products IPA 99 % isopropyl alkohol or Etanol 96 % denaturovaný rastlinný. After applying the disinfection, allow the packaging and spray pump to dry completely at room temperature. With this procedure you will support safe repeated use of the packaging.

If you decide not to use the packaging further, we recommend disposing of it in accordance with the recommendations set out in the product parameters. The glass body of the bottle can generally, after emptying and basic cleaning, be handed over to the appropriate glass collection container or to a collection yard, depending on the local rules for waste separation. The plastic parts of the spray pump (head, tube) should, after separation from the glass, be placed in the appropriate stream of sorted waste, if the local collection system allows this. Before recycling, always check the recycling recommendations indicated for the product on Handymade.sk and follow the applicable rules in your municipality.

To select the right packaging, you can use the advanced filter, which you will find in the upper part of the page after clicking on the relevant packaging category. Thanks to the filter, you can quickly narrow down the offer according to your requirements – for example by neck type, size, colour or material. In this way you can easily find bottles, medicine bottles, jars or pots that will meet the technical and design needs of your specific product.

When filling, it is important to maintain the cleanliness of the working environment, use suitable filling aids and not overfill the contents of the bottle so that the spray pump works and seals correctly. Before both the first and repeated filling, the packaging must be carefully cleaned and disinfected, for example using the products IPA 99 % isopropyl alkohol or Etanol 96 % denaturovaný rastlinný. When storing finished products, it is recommended to protect the bottle from mechanical damage and extreme temperatures so that the quality and stability of the packaged product are preserved.