The bottle with dropper is primarily intended for dropwise dosing of thin to medium-viscosity liquids, so it works well for most facial serums, oils and water–alcohol solutions. For very thick oils or gel-type preparations, we recommend performing a dosing trial and, if necessary, choosing another type of packaging, for example a bottle with pump or a suitable jar.

The glass bottle can be used repeatedly, even when changing the type of product, provided hygienic principles are followed. Before each new filling, the packaging must be thoroughly cleaned and disinfected with a suitable agent, for example isopropyl alcohol IPA 99 % or plant-based ethanol Ethanol 96 %. This reduces the risk of microbiological contamination as well as transfer of the fragrance or residues of the previous product into the new composition.

The dropper and closure should first be mechanically cleaned of product residues, then rinsed with a suitable cleaning solution and finally disinfected with alcohol, for example using IPA 99 % or Ethanol 96 %. After disinfection, we recommend allowing all parts to dry thoroughly at room temperature. With repeated use, it is important to continuously check the condition of the dropper and the sealing to ensure reliable dosing and tightness of the packaging.

If you decide not to reuse the packaging, it is advisable to recycle it according to the type of material indicated in the product parameters. The glass bottle can usually be placed, after emptying and basic rinsing, into the container designated for glass. The closure and dropper are usually made of plastic or a combination of materials and, according to the indicated material type, should be sorted into the corresponding separated waste stream. Before recycling, we recommend separating the bottle and the closure, removing any remaining contents and following local waste-sorting rules.

The simplest solution is to use the advanced filter in the packaging category. After clicking on the relevant category, the advanced filter is located at the top of the page and allows you to quickly narrow down the selection according to specific parameters. You can filter by neck type, size, colour and material, or combine several criteria at once. Thanks to this, you can tailor the selection of bottles, dropper bottles, jars, pots or pumps exactly to the requirements of your product and method of application.